mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Stefan Christ <s.christ@phytec.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 4/4] ARM: i.MX ocotp: Switch to regmap support
Date: Thu, 4 Feb 2016 08:38:30 +0100	[thread overview]
Message-ID: <20160204073830.GA2447@lws-christ> (raw)
In-Reply-To: <1454516411-22858-5-git-send-email-s.hauer@pengutronix.de>

Hi Sascha,

> +	priv->map = regmap_init(dev, &imx_ocotp_regmap_bus, priv, &imx_ocotp_regmap_config);
> +	if (IS_ERR(priv->map))
> +		return PTR_ERR(priv->map);
> +
> +	ret = regmap_register_cdev(priv->map, "imx-ocotp");
> +        if (ret)
> +                return ret;
> +

Here are whitespaces instead of tabs.

Mit freundlichen Grüßen / Kind regards,
	Stefan Christ

On Wed, Feb 03, 2016 at 05:20:11PM +0100, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm/mach-imx/ocotp.c | 146 ++++++++++++++++++----------------------------
>  1 file changed, 57 insertions(+), 89 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/ocotp.c b/arch/arm/mach-imx/ocotp.c
> index c99a003..c6c341d 100644
> --- a/arch/arm/mach-imx/ocotp.c
> +++ b/arch/arm/mach-imx/ocotp.c
> @@ -26,6 +26,7 @@
>  #include <io.h>
>  #include <of.h>
>  #include <clock.h>
> +#include <regmap.h>
>  #include <linux/clk.h>
>  
>  /*
> @@ -71,7 +72,7 @@
>  #define MAC_BYTES			8
>  
>  struct ocotp_priv {
> -	struct cdev cdev;
> +	struct regmap *map;
>  	void __iomem *base;
>  	struct clk *clk;
>  	struct device_d dev;
> @@ -159,53 +160,42 @@ int imx6_ocotp_read_one_u32(u32 index, u32 *pdata, struct ocotp_priv *priv)
>  
>  	ret = imx6_ocotp_prepare(priv);
>  	if (ret) {
> -		dev_err(priv->cdev.dev, "failed to prepare read fuse 0x%08x\n",
> +		dev_err(&priv->dev, "failed to prepare read fuse 0x%08x\n",
>  				index);
>  		return ret;
>  	}
>  
>  	ret = fuse_read_addr(index, pdata, priv);
>  	if (ret) {
> -		dev_err(priv->cdev.dev, "failed to read fuse 0x%08x\n", index);
> +		dev_err(&priv->dev, "failed to read fuse 0x%08x\n", index);
>  		return ret;
>  	}
>  
>  	if (readl(priv->base) & OCOTP_CTRL_ERROR) {
> -		dev_err(priv->cdev.dev, "bad read status at fuse 0x%08x\n", index);
> +		dev_err(&priv->dev, "bad read status at fuse 0x%08x\n", index);
>  		return -EFAULT;
>  	}
>  
>  	return 0;
>  }
>  
> -static ssize_t imx6_ocotp_cdev_read(struct cdev *cdev, void *buf,
> -		size_t count, loff_t offset, unsigned long flags)
> +static int imx_ocotp_reg_read(void *ctx, unsigned int reg, unsigned int *val)
>  {
> +	struct ocotp_priv *priv = ctx;
>  	u32 index;
> -	ssize_t read_count = 0;
> -	int ret, i;
> -	struct ocotp_priv *priv = container_of(cdev, struct ocotp_priv, cdev);
> -
> -	index = offset >> 2;
> -	count >>= 2;
> -
> -	if (count > (FUSE_REGS_COUNT - index))
> -		count = FUSE_REGS_COUNT - index - 1;
> -
> -	for (i = index; i < (index + count); i++) {
> -		if (priv->sense_enable) {
> -			ret = imx6_ocotp_read_one_u32(i, buf, priv);
> -			if (ret)
> -				return ret;
> -		} else {
> -			*(u32 *)buf = readl(priv->base + 0x400 + i * 0x10);
> -		}
> +	int ret;
>  
> -		buf += 4;
> -		read_count++;
> +	index = reg >> 2;
> +
> +	if (priv->sense_enable) {
> +		ret = imx6_ocotp_read_one_u32(index, val, priv);
> +		if (ret)
> +			return ret;
> +	} else {
> +		*(u32 *)val = readl(priv->base + 0x400 + index * 0x10);
>  	}
>  
> -	return read_count << 2;
> +	return 0;
>  }
>  
>  static int fuse_blow_addr(u32 addr, u32 value, struct ocotp_priv *priv)
> @@ -232,7 +222,7 @@ static int fuse_blow_addr(u32 addr, u32 value, struct ocotp_priv *priv)
>  
>  static int imx6_ocotp_reload_shadow(struct ocotp_priv *priv)
>  {
> -	dev_info(priv->cdev.dev, "reloading shadow registers...\n");
> +	dev_info(&priv->dev, "reloading shadow registers...\n");
>  	writel(OCOTP_CTRL_RELOAD_SHADOWS, priv->base + OCOTP_CTRL_SET);
>  	udelay(1);
>  
> @@ -246,18 +236,18 @@ int imx6_ocotp_blow_one_u32(u32 index, u32 data, u32 *pfused_value,
>  
>  	ret = imx6_ocotp_prepare(priv);
>  	if (ret) {
> -		dev_err(priv->cdev.dev, "prepare to write failed\n");
> +		dev_err(&priv->dev, "prepare to write failed\n");
>  		return ret;
>  	}
>  
>  	ret = fuse_blow_addr(index, data, priv);
>  	if (ret) {
> -		dev_err(priv->cdev.dev, "fuse blow failed\n");
> +		dev_err(&priv->dev, "fuse blow failed\n");
>  		return ret;
>  	}
>  
>  	if (readl(priv->base) & OCOTP_CTRL_ERROR) {
> -		dev_err(priv->cdev.dev, "bad write status\n");
> +		dev_err(&priv->dev, "bad write status\n");
>  		return -EFAULT;
>  	}
>  
> @@ -266,60 +256,29 @@ int imx6_ocotp_blow_one_u32(u32 index, u32 data, u32 *pfused_value,
>  	return ret;
>  }
>  
> -static ssize_t imx6_ocotp_cdev_write(struct cdev *cdev, const void *buf,
> -		size_t count, loff_t offset, unsigned long flags)
> +static int imx_ocotp_reg_write(void *ctx, unsigned int reg, unsigned int val)
>  {
> -	struct ocotp_priv *priv = cdev->priv;
> -	int index, i;
> -	ssize_t write_count = 0;
> -	const u32 *data;
> +	struct ocotp_priv *priv = ctx;
> +	int index;
>  	u32 pfuse;
>  	int ret;
>  
> -	/* We could do better, but currently this is what's implemented */
> -	if (offset & 0x3 || count & 0x3) {
> -		dev_err(cdev->dev, "only u32 aligned writes allowed\n");
> -		return -EINVAL;
> -	}
> -
> -	index = offset >> 2;
> -	count >>= 2;
> -
> -	if (count > (FUSE_REGS_COUNT - index))
> -		count = FUSE_REGS_COUNT - index - 1;
> +	index = reg >> 2;
>  
> -	data = buf;
> -
> -	for (i = index; i < (index + count); i++) {
> -		if (priv->permanent_write_enable) {
> -			ret = imx6_ocotp_blow_one_u32(i, *data,
> -					&pfuse, priv);
> -			if (ret < 0) {
> -				goto out;
> -			}
> -		} else {
> -			writel(*data, priv->base + 0x400 + i * 0x10);
> -		}
> -
> -		data++;
> -		write_count++;
> +	if (priv->permanent_write_enable) {
> +		ret = imx6_ocotp_blow_one_u32(index, val, &pfuse, priv);
> +		if (ret < 0)
> +			return ret;
> +	} else {
> +		writel(val, priv->base + 0x400 + index * 0x10);
>  	}
>  
> -	ret = 0;
> -
> -out:
>  	if (priv->permanent_write_enable)
>  		imx6_ocotp_reload_shadow(priv);
>  
> -	return ret < 0 ? ret : (write_count << 2);
> +	return 0;
>  }
>  
> -static struct file_operations imx6_ocotp_ops = {
> -	.read	= imx6_ocotp_cdev_read,
> -	.write	= imx6_ocotp_cdev_write,
> -	.lseek	= dev_lseek_default,
> -};
> -
>  static uint32_t inc_offset(uint32_t offset)
>  {
>  	if ((offset & 0x3) == 0x3)
> @@ -373,9 +332,11 @@ static int imx_ocotp_get_mac(struct param_d *param, void *priv)
>  {
>  	struct ocotp_priv *ocotp_priv = priv;
>  	char buf[8];
> -	int i;
> +	int i, ret;
>  
> -	imx6_ocotp_cdev_read(&ocotp_priv->cdev, buf, MAC_BYTES, MAC_OFFSET, 0);
> +	ret = regmap_bulk_read(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
> +	if (ret < 0)
> +		return ret;
>  
>  	for (i = 0; i < 6; i++)
>  		ocotp_priv->ethaddr[i] = buf[5 - i];
> @@ -393,18 +354,29 @@ static int imx_ocotp_set_mac(struct param_d *param, void *priv)
>  		buf[5 - i] = ocotp_priv->ethaddr[i];
>  	buf[6] = 0; buf[7] = 0;
>  
> -	ret = imx6_ocotp_cdev_write(&ocotp_priv->cdev, buf, MAC_BYTES, MAC_OFFSET, 0);
> +	ret = regmap_bulk_write(ocotp_priv->map, MAC_OFFSET, buf, MAC_BYTES);
>  	if (ret < 0)
>  		return ret;
>  
>  	return 0;
>  }
>  
> +static struct regmap_bus imx_ocotp_regmap_bus = {
> +	.reg_write = imx_ocotp_reg_write,
> +	.reg_read = imx_ocotp_reg_read,
> +};
> +
> +static const struct regmap_config imx_ocotp_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = 0xbc,
> +};
> +
>  static int imx_ocotp_probe(struct device_d *dev)
>  {
>  	void __iomem *base;
>  	struct ocotp_priv *priv;
> -	struct cdev *cdev;
>  	int ret = 0;
>  
>  	base = dev_request_mem_region(dev, 0);
> @@ -420,22 +392,18 @@ static int imx_ocotp_probe(struct device_d *dev)
>  	if (IS_ERR(priv->clk))
>  		return PTR_ERR(priv->clk);
>  
> -	cdev		= &priv->cdev;
> -	cdev->dev	= dev;
> -	cdev->ops	= &imx6_ocotp_ops;
> -	cdev->priv	= priv;
> -	cdev->size	= 192;
> -	cdev->name	= "imx-ocotp";
> -
> -	ret = devfs_create(cdev);
> -
> -	if (ret < 0)
> -		return ret;
> -
>  	strcpy(priv->dev.name, "ocotp");
>  	priv->dev.parent = dev;
>  	register_device(&priv->dev);
>  
> +	priv->map = regmap_init(dev, &imx_ocotp_regmap_bus, priv, &imx_ocotp_regmap_config);
> +	if (IS_ERR(priv->map))
> +		return PTR_ERR(priv->map);
> +
> +	ret = regmap_register_cdev(priv->map, "imx-ocotp");
> +        if (ret)
> +                return ret;
> +
>  	if (IS_ENABLED(CONFIG_IMX_OCOTP_WRITE)) {
>  		dev_add_param_bool(&(priv->dev), "permanent_write_enable",
>  				NULL, NULL, &priv->permanent_write_enable, NULL);
> -- 
> 2.7.0.rc3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2016-02-04  7:39 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-03 16:20 [PATCH] Add " Sascha Hauer
2016-02-03 16:20 ` [PATCH 1/4] bitops: Fix shift overflow in GENMASK macros Sascha Hauer
2016-02-03 16:20 ` [PATCH 2/4] Add initial regmap support Sascha Hauer
2016-02-03 16:20 ` [PATCH 3/4] mfd: mc13xxx: Switch to " Sascha Hauer
2016-02-03 16:20 ` [PATCH 4/4] ARM: i.MX ocotp: " Sascha Hauer
2016-02-04  7:38   ` Stefan Christ [this message]
2016-02-04  7:43     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160204073830.GA2447@lws-christ \
    --to=s.christ@phytec.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox