mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: v2016.02.0
Date: Mon, 8 Feb 2016 08:26:13 +0100	[thread overview]
Message-ID: <20160208072613.GW4118@pengutronix.de> (raw)


The February release is out.

With this release we gain RAMOOPS support to read oopses from a
previously crashed kernel. Also we have basic Raspberry Pi 2 support
and several RTC updates. Partition names can now have links, so if
used, there are more ways to identify a partition without guessing
running indices. There's more, see below for a complete list.

Sascha

----------------------------------------------------------------
Alexander Aring (6):
      arm: bcm2835: fix indentation
      bcm2835: introduce mach-bcm283x
      bcm283x: mbox: align to cachesize
      rpi: sync revision detection with u-boot
      led: add missing includes
      arm: bcm283x: add rpi2 support

Andrey Panov (1):
      ARM: i.MX6Q: Embedsky E9: Convert environment paths in DTS to a new bindings

Andrey Smirnov (10):
      rtc: ds1307: Add code to support ds1337/1341
      rtc: ds1307: Fix a memory leak
      rtc-lib: Check tm_wday for validity in rtc_valid_tm()
      commands/hwclock: Check return value of rtc_read_time()
      i.MX6: pci: Replace magic number with a named constant
      i.MX6: pci: Reconcile imx6_pcie_start_link with the kernel code
      i.MX6: pci: Avoid aborts when asserting PCIe reset
      ARM: asm: Add convenience fucntions to access VBAR
      ARM: mmu: Add VBAR setup
      ARM: Fix exception table setup in MMU-less mode

David Jander (1):
      usb: chipidea-imx: check return value of regulator_get()

Enrico Jorns (1):
      arm: imx53-guf-vincell-lt: dts: do not specfiy fixed memory information

Fabio Estevam (1):
      imx233-olinuxino: Fix mx23_power_init() arguments

Florian Vallee (1):
      imx-usb-loader: Add i.MX6ul support

Lucas Stach (2):
      PCI: imx6: properly shut down core when leaving barebox
      ARM: PXA: move HAVE_CLK select

Marc Kleine-Budde (1):
      state: hmac: fix error message that algo is displayed

Markus Pargmann (12):
      arm: boards: karo-tx6x remove definition of DIV_ROUND_UP
      log2: Add missing __rounddown_pow_of_two()
      printk: Add missing include/declaration
      vsprintf: Add scnprintf from kernel
      lib: Import reed solomon code from kernel
      arm: Clarify memory layout calculation
      arm: start: Add visible sdram region for barebox board data
      arm: Add RAMOOPS memory area
      fs: Add pstore filesystem
      Documentation: Document pstore/RAMOOPS
      mtd: nand: Add erased page bitflip check helper functions
      mtd: gpmi: Add erased page bitflip correction

Sascha Hauer (52):
      dts: update to v4.2-rc2
      dts: update to v4.2-rc3
      dts: update to v4.2-rc4
      dts: update to v4.2-rc5
      dts: update to v4.2-rc6
      dts: update to v4.2-rc7
      dts: update to v4.3-rc1
      dts: update to v4.3-rc3
      dts: update to v4.3-rc4
      dts: update to v4.3-rc5
      dts: update to v4.3-rc7
      dts: update to v4.3
      dts: update to v4.4-rc1
      dts: update to v4.4-rc2
      dts: update to v4.4-rc3
      dts: update to v4.4-rc4
      ubiformat: fix the subpage size hint on the error path
      linux/barebox-wrapper: Silence gcc5 warning
      ARM: Omap3: Remove useless inline
      net: dhcp: unify options and params
      net: dhcp: simplify dhcp_options_process
      net: dhcp: make unmodified variable const
      net: resolv: Make argument const
      imx-usb-loader: whitespace fixup
      hwclock command: use format like the Linux tool does
      hwclock command: forward return value of rtc_set_time
      rtc: Check time for validity before passing it to the rtc driver
      rtc: Fill in weekdays before setting time
      net: Add SNTP support
      hwclock: Allow to set hwclock from sntp
      rtc: Add Abracon driver
      input: gpio-keys: implement debouncing
      state: implement signed int support
      devfs: Add symlink support
      partition: Create links with partition names
      readline: Fix potential buffer overflow
      readline: Fix potential buffer overflow in command history
      fs: automount: Make automountpoints persistent
      of_path: Drop possible further extensions of device-path property
      Merge branch 'for-next/arm'
      Merge branch 'for-next/dts'
      Merge branch 'for-next/gcc5'
      Merge branch 'for-next/imx'
      Merge branch 'for-next/misc'
      Merge branch 'for-next/mtd'
      Merge branch 'for-next/net'
      Merge branch 'for-next/pstore'
      Merge branch 'for-next/rtc'
      Merge branch 'for-next/socfpga'
      hush: Initialize struct p_context
      ubifs: Fix reading holes in files
      Release v2016.02.0

Trent Piepho (10):
      bootstrap: Boot barebox with kernel calling convention
      socfpga: Allow setting partition xloader boots from for mmc
      partitions/efi: Add partuuid to partition description
      bootstrap: constify strings
      cdev: When creating a new cdev, initialize device_node
      environment: Support env from file in a file-system via device tree
      socfpga: Find partition with environment via device tree
      of: Add for_each_compatible_node_from iterator
      of: Add of_property_for_each_phandle() iterator
      OF: Fix fixups to fix Linux DT instead of Barebox DT


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

                 reply	other threads:[~2016-02-08  7:26 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160208072613.GW4118@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox