From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1anKoD-00055S-Cp for barebox@lists.infradead.org; Tue, 05 Apr 2016 06:49:54 +0000 Date: Tue, 5 Apr 2016 08:49:30 +0200 From: Sascha Hauer Message-ID: <20160405064930.GE9102@pengutronix.de> References: <20150617064250.GA2778@lws-weitzel2@phytec.de> <20150617090646.GI6325@pengutronix.de> <1459806291.24482.38.camel@ws-apr.office.loc> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1459806291.24482.38.camel@ws-apr.office.loc> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: barebox-state (dt-utils): dump-shell broken for state@0 To: Andreas Pretzsch Cc: barebox@lists.infradead.org +Cc mkl who wrote 6d58ca4 On Mon, Apr 04, 2016 at 11:44:51PM +0200, Andreas Pretzsch wrote: > On Mi, 2015-06-17 at 11:06 +0200, Sascha Hauer wrote: > > On Wed, Jun 17, 2015 at 08:42:50AM +0200, Jan Remmet wrote: > > > Hello, > > > I'm working with barebox states and wonder if there is already a tool to access > > > states in eeprom from linux? > > > The states from a dtb backend should be easy to read. For raw there must be > > > looked under /proc/devicetree or a state kernel driver. > > > > Yes, there is such a tool here: > > > > git://git.pengutronix.de/git/tools/dt-utils.git > > > > The binary you'll need is barebox-state. > > barebox-state provides a command "--dump-shell" to dump the state > suitable for shell sourcing. > Essentially, it prints out variable=value pairs. > So typical use would be a > eval `barebox-state --dump-shell` > somewhere in a shell script (incl. simple ones like busybox ash). > > Unfortunately, this breaks with indices in the state name, as @ is not > escaped. > Tested with dt-utils v2015.10.0, but according to code this is the case > from v2015.05.0 up until master. > > As of commit 6d58ca4 "barebox-state: fix export of shell variables:", > the fixed prefix "STATE_" was replaced by the supplied state name. > Also in there, all '.' are replaced by '_' in the variable name. Not in > the state name itself. > > The same would be necessary for (at least) '@', because it is invalid > also inside a shell variable name. As probably other chars, just I'm not > sure which might show up from the dts. So no premature patch from my > side. > Not only for the variable name, but also the state name itself. > > For clarification of the setup and behaviour, see below. > > > Now, question would be how to fix this. > Also replacing '@' by '_' might break existing users (e.g. when parsing > from stdin or similar, instead of using shells eval command). > On the other hand, status quo breaks the "described" use of dump > _shell_ ... > > Talking about this, it might be also some idea to resurrect the old > behaviour of always printing 'STATE_' as prefix instead of the state > name from dts. Not sure if it's the best idea, or how to call such an > extra option, didn't think it through by now. > Just saying, as I will go this way here (as a hotfix) for my setup... > > Ideas, opinions ? I'm in favor for resurrecting the old 'STATE_' behaviour, but I don't know why Marc changed it. Maybe he has some more input. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox