* [PATCH] whole tree: remove trail space
@ 2016-04-21 11:30 DU HUANPENG
2016-04-21 13:22 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: DU HUANPENG @ 2016-04-21 11:30 UTC (permalink / raw)
To: barebox; +Cc: Du Huanpeng
From: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Du Huanpeng <u74147@gmail.com>
---
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 2 +-
arch/arm/boards/freescale-mx21-ads/imx21ads.c | 4 +-
arch/arm/boards/freescale-mx23-evk/mx23-evk.c | 2 +-
arch/arm/boards/freescale-mx27-ads/imx27ads.c | 2 +-
arch/arm/boards/phytec-phycard-imx27/pca100.c | 2 +-
arch/arm/boards/phytec-phycore-imx27/pcm038.c | 2 +-
arch/arm/include/asm/elf.h | 4 +-
arch/arm/mach-netx/clocksource.c | 2 +-
arch/arm/mach-socfpga/include/mach/sequencer.c | 438 +++++++++++-----------
arch/blackfin/cpu-bf561/start.S | 14 +-
arch/blackfin/include/asm/cpu/cdefBF561.h | 4 +-
arch/blackfin/include/asm/cpu/defBF561.h | 332 ++++++++--------
arch/blackfin/lib/udivsi3.S | 2 +-
arch/nios2/lib/longlong.h | 2 +-
arch/ppc/include/asm/elf.h | 20 +-
common/module.c | 2 +-
common/tlsf.c | 6 +-
crypto/digest.c | 2 +-
crypto/sha2.c | 2 +-
drivers/net/altera_tse.c | 2 +-
drivers/net/fec_imx.h | 2 +-
drivers/net/smc911x.h | 2 +-
drivers/spi/imx_spi.c | 2 +-
fs/cramfs/cramfs.c | 2 +-
fs/ubifs/super.c | 2 +-
fs/ubifs/ubifs.h | 2 +-
include/elf.h | 2 +-
include/fb.h | 4 +-
include/linux/mount.h | 2 +-
include/linux/rbtree.h | 4 +-
lib/glob.c | 2 +-
lib/rbtree.c | 4 +-
32 files changed, 438 insertions(+), 438 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
index 07fee05..f27dcd6 100644
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2009 Eric Benard, Eukrea Electromatique
* Based on pcm038.c which is :
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/boards/freescale-mx21-ads/imx21ads.c b/arch/arm/boards/freescale-mx21-ads/imx21ads.c
index 5f0e7bd..8afe9ac 100644
--- a/arch/arm/boards/freescale-mx21-ads/imx21ads.c
+++ b/arch/arm/boards/freescale-mx21-ads/imx21ads.c
@@ -1,8 +1,8 @@
/*
* Copyright (C) 2009 Ivo Clarysse
- *
+ *
* Based on imx27ads.c,
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
index 6348692..dd80488 100644
--- a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
+++ b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
@@ -139,7 +139,7 @@ static int mx23_evk_console_init(void)
add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
IORESOURCE_MEM, NULL);
-
+
return 0;
}
diff --git a/arch/arm/boards/freescale-mx27-ads/imx27ads.c b/arch/arm/boards/freescale-mx27-ads/imx27ads.c
index 109f7f9..9818a55 100644
--- a/arch/arm/boards/freescale-mx27-ads/imx27ads.c
+++ b/arch/arm/boards/freescale-mx27-ads/imx27ads.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/boards/phytec-phycard-imx27/pca100.c b/arch/arm/boards/phytec-phycard-imx27/pca100.c
index 895fae8..b0fee46 100644
--- a/arch/arm/boards/phytec-phycard-imx27/pca100.c
+++ b/arch/arm/boards/phytec-phycard-imx27/pca100.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/boards/phytec-phycore-imx27/pcm038.c b/arch/arm/boards/phytec-phycore-imx27/pcm038.c
index 01f6a55..f1f8081 100644
--- a/arch/arm/boards/phytec-phycore-imx27/pcm038.c
+++ b/arch/arm/boards/phytec-phycore-imx27/pcm038.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 724ebb0..b98b3e5 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -90,8 +90,8 @@ extern char elf_platform[];
#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-/* When the program starts, a1 contains a pointer to a function to be
- registered with atexit, as per the SVR4 ABI. A value of 0 means we
+/* When the program starts, a1 contains a pointer to a function to be
+ registered with atexit, as per the SVR4 ABI. A value of 0 means we
have no such handler. */
#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
diff --git a/arch/arm/mach-netx/clocksource.c b/arch/arm/mach-netx/clocksource.c
index 8f53364..2635472 100644
--- a/arch/arm/mach-netx/clocksource.c
+++ b/arch/arm/mach-netx/clocksource.c
@@ -1,7 +1,7 @@
/*
*
* (C) Copyright 2007
- * Sascha Hauer, Pengutronix
+ * Sascha Hauer, Pengutronix
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/arch/arm/mach-socfpga/include/mach/sequencer.c b/arch/arm/mach-socfpga/include/mach/sequencer.c
index c299f75..d2338e6 100644
--- a/arch/arm/mach-socfpga/include/mach/sequencer.c
+++ b/arch/arm/mach-socfpga/include/mach/sequencer.c
@@ -292,11 +292,11 @@ static void initialize(void)
{
IOWR_32DIRECT(PHY_MGR_MUX_SEL, 0, 0x3);
- //USER memory clock is not stable we begin initialization
+ //USER memory clock is not stable we begin initialization
IOWR_32DIRECT(PHY_MGR_RESET_MEM_STBL, 0, 0);
- //USER calibration status all set to zero
+ //USER calibration status all set to zero
IOWR_32DIRECT(PHY_MGR_CAL_STATUS, 0, 0);
IOWR_32DIRECT(PHY_MGR_CAL_DEBUG_INFO, 0, 0);
@@ -451,7 +451,7 @@ static void set_rank_and_odt_mask(uint32_t rank, uint32_t odt_mode)
//USER Given a rank, select the set of shadow registers that is responsible for the
//USER delays of such rank, so that subsequent SCC updates will go to those shadow
-//USER registers.
+//USER registers.
static void select_shadow_regs_for_update(uint32_t rank, uint32_t group,
uint32_t update_scan_chains)
{
@@ -494,7 +494,7 @@ static void scc_mgr_set_dqs_en_phase_all_ranks(uint32_t read_group, uint32_t pha
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r += NUM_RANKS_PER_SHADOW_REG) {
//USER although the h/w doesn't support different phases per shadow register,
- //USER for simplicity our scc manager modeling keeps different phase settings per
+ //USER for simplicity our scc manager modeling keeps different phase settings per
//USER shadow reg, and it's important for us to keep them in sync to match h/w.
//USER for efficiency, the scan chain update should occur only once to sr0.
update_scan_chains = (r == 0) ? 1 : 0;
@@ -522,7 +522,7 @@ static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group, uint3
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r += NUM_RANKS_PER_SHADOW_REG) {
//USER although the h/w doesn't support different phases per shadow register,
- //USER for simplicity our scc manager modeling keeps different phase settings per
+ //USER for simplicity our scc manager modeling keeps different phase settings per
//USER shadow reg, and it's important for us to keep them in sync to match h/w.
//USER for efficiency, the scan chain update should occur only once to sr0.
update_scan_chains = (r == 0) ? 1 : 0;
@@ -749,7 +749,7 @@ static void scc_set_bypass_mode(uint32_t write_group, uint32_t mode)
DPRINT(1, "Done Setting HHP Extras");
}
- //USER multicast to all DQ enables
+ //USER multicast to all DQ enables
IOWR_32DIRECT(SCC_MGR_DQ_ENA, 0, 0xff);
IOWR_32DIRECT(SCC_MGR_DM_ENA, 0, 0xff);
@@ -802,7 +802,7 @@ static void scc_mgr_zero_group(uint32_t write_group, uint32_t test_begin, int32_
//USER multicast to all DQ enables
IOWR_32DIRECT(SCC_MGR_DQ_ENA, 0, 0xff);
- //USER Zero all DM config settings
+ //USER Zero all DM config settings
for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) {
if (!out_only) {
// Do we really need this?
@@ -815,7 +815,7 @@ static void scc_mgr_zero_group(uint32_t write_group, uint32_t test_begin, int32_
//USER multicast to all DM enables
IOWR_32DIRECT(SCC_MGR_DM_ENA, 0, 0xff);
- //USER zero all DQS io settings
+ //USER zero all DQS io settings
if (!out_only) {
scc_mgr_set_dqs_io_in_delay(write_group, 0);
}
@@ -827,33 +827,33 @@ static void scc_mgr_zero_group(uint32_t write_group, uint32_t test_begin, int32_
//USER multicast to all DQS IO enables (only 1)
IOWR_32DIRECT(SCC_MGR_DQS_IO_ENA, 0, 0);
- //USER hit update to zero everything
+ //USER hit update to zero everything
IOWR_32DIRECT(SCC_MGR_UPD, 0, 0);
}
}
-//USER load up dqs config settings
+//USER load up dqs config settings
static void scc_mgr_load_dqs(uint32_t dqs)
{
IOWR_32DIRECT(SCC_MGR_DQS_ENA, 0, dqs);
}
-//USER load up dqs io config settings
+//USER load up dqs io config settings
static void scc_mgr_load_dqs_io(void)
{
IOWR_32DIRECT(SCC_MGR_DQS_IO_ENA, 0, 0);
}
-//USER load up dq config settings
+//USER load up dq config settings
static void scc_mgr_load_dq(uint32_t dq_in_group)
{
IOWR_32DIRECT(SCC_MGR_DQ_ENA, 0, dq_in_group);
}
-//USER load up dm config settings
+//USER load up dm config settings
static void scc_mgr_load_dm(uint32_t dm)
{
@@ -934,20 +934,20 @@ static void scc_mgr_set_group_dqs_io_and_oct_out1_gradual(uint32_t write_group,
}
}
-//USER apply a delay to the entire output side: DQ, DM, DQS, OCT
+//USER apply a delay to the entire output side: DQ, DM, DQS, OCT
static void scc_mgr_apply_group_all_out_delay(uint32_t write_group, uint32_t group_bgn,
uint32_t delay)
{
- //USER dq shift
+ //USER dq shift
scc_mgr_apply_group_dq_out1_delay(write_group, group_bgn, delay);
- //USER dm shift
+ //USER dm shift
scc_mgr_apply_group_dm_out1_delay(write_group, delay);
- //USER dqs and oct shift
+ //USER dqs and oct shift
scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, delay);
}
@@ -968,14 +968,14 @@ static void scc_mgr_apply_group_all_out_delay_all_ranks(uint32_t write_group, ui
}
}
-//USER apply a delay to the entire output side: DQ, DM, DQS, OCT
+//USER apply a delay to the entire output side: DQ, DM, DQS, OCT
static void scc_mgr_apply_group_all_out_delay_add(uint32_t write_group, uint32_t group_bgn,
uint32_t delay)
{
uint32_t i, p, new_delay;
- //USER dq shift
+ //USER dq shift
for (i = 0, p = group_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
@@ -994,7 +994,7 @@ static void scc_mgr_apply_group_all_out_delay_add(uint32_t write_group, uint32_t
scc_mgr_load_dq(i);
}
- //USER dm shift
+ //USER dm shift
for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) {
new_delay = READ_SCC_DM_IO_OUT2_DELAY(i);
@@ -1012,7 +1012,7 @@ static void scc_mgr_apply_group_all_out_delay_add(uint32_t write_group, uint32_t
scc_mgr_load_dm(i);
}
- //USER dqs shift
+ //USER dqs shift
new_delay = READ_SCC_DQS_IO_OUT2_DELAY();
new_delay += delay;
@@ -1029,7 +1029,7 @@ static void scc_mgr_apply_group_all_out_delay_add(uint32_t write_group, uint32_t
scc_mgr_set_dqs_out2_delay(write_group, new_delay);
scc_mgr_load_dqs_io();
- //USER oct shift
+ //USER oct shift
new_delay = READ_SCC_OCT_OUT2_DELAY(write_group);
new_delay += delay;
@@ -1200,7 +1200,7 @@ static void rw_mgr_mem_initialize(void)
//USER indicate that memory is stable
IOWR_32DIRECT(PHY_MGR_RESET_MEM_STBL, 0, 1);
- //USER transition the RESET to high
+ //USER transition the RESET to high
//USER Wait for 500us
//USER num_cycles = (CTR2 + 1) * [(CTR1 + 1) * (2 * (CTR0 + 1) + 1) + 1] + 1
//USER Load counters
@@ -1215,12 +1215,12 @@ static void rw_mgr_mem_initialize(void)
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_INIT_RESET_1_CKE_0);
- //USER bring up clock enable
+ //USER bring up clock enable
//USER tXRP < 250 ck cycles
delay_for_n_mem_clocks(250);
- // USER initialize RDIMM buffer so MRS and RZQ Calibrate commands will be
+ // USER initialize RDIMM buffer so MRS and RZQ Calibrate commands will be
// USER propagated to discrete memory devices
rw_mgr_rdimm_initialize();
@@ -1231,7 +1231,7 @@ static void rw_mgr_mem_initialize(void)
continue;
}
- //USER set rank
+ //USER set rank
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
//USER Use Mirror-ed commands for odd ranks if address mirrorring is on
@@ -1288,11 +1288,11 @@ static void rw_mgr_mem_handoff(void)
//USER set rank
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
- //USER precharge all banks ...
+ //USER precharge all banks ...
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_PRECHARGE_ALL);
- //USER load up MR settings specified by user
+ //USER load up MR settings specified by user
//USER Use Mirror-ed commands for odd ranks if address mirrorring is on
if ((RW_MGR_MEM_ADDRESS_MIRRORING >> r) & 0x1) {
@@ -1397,7 +1397,7 @@ static uint32_t rw_mgr_mem_calibrate_read_test_patterns_all_ranks(uint32_t group
return 1;
} else {
// case:139851 - if guaranteed read fails, we can retry using different dqs enable phases.
- // It is possible that with the initial phase, dqs enable is asserted/deasserted too close
+ // It is possible that with the initial phase, dqs enable is asserted/deasserted too close
// to an dqs edge, truncating the read burst.
uint32_t p;
for (p = 0; p <= IO_DQS_EN_PHASE_MAX; p++) {
@@ -1411,7 +1411,7 @@ static uint32_t rw_mgr_mem_calibrate_read_test_patterns_all_ranks(uint32_t group
}
}
-//USER load up the patterns we are going to use during a read test
+//USER load up the patterns we are going to use during a read test
static void rw_mgr_mem_calibrate_read_load_patterns(uint32_t rank_bgn, uint32_t all_ranks)
{
uint32_t r;
@@ -1456,96 +1456,96 @@ static inline void rw_mgr_mem_calibrate_read_load_patterns_all_ranks(void)
//void pe_checkout_pattern (void)
//{
// // test RW manager
-//
+//
// // do some reads to check load buffer
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_1, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_1, 0, __RW_MGR_READ_B2B_WAIT1);
//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_2, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_2, 0, __RW_MGR_READ_B2B_WAIT2);
-//
+//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_0, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_0, 0, __RW_MGR_READ_B2B);
-//
+//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_3, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_3, 0, __RW_MGR_READ_B2B);
-//
+//
// // clear error word
// IOWR_32DIRECT (RW_MGR_RESET_READ_DATAPATH, 0, 0);
-//
+//
// IOWR_32DIRECT (RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_READ_B2B);
-//
+//
// uint32_t readdata;
-//
+//
// // read error word
// readdata = IORD_32DIRECT(BASE_RW_MGR, 0);
-//
+//
// // read DI buffer
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 0*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 1*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 2*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 3*4, 0);
-//
+//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_1, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_1, 0, __RW_MGR_READ_B2B_WAIT1);
//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_2, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_2, 0, __RW_MGR_READ_B2B_WAIT2);
-//
+//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_0, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_0, 0, __RW_MGR_READ_B2B);
-//
+//
// IOWR_32DIRECT (RW_MGR_LOAD_CNTR_3, 0, 0x0);
// IOWR_32DIRECT (RW_MGR_LOAD_JUMP_ADD_3, 0, __RW_MGR_READ_B2B);
-//
+//
// // clear error word
// IOWR_32DIRECT (RW_MGR_RESET_READ_DATAPATH, 0, 0);
-//
+//
// // do read
// IOWR_32DIRECT (RW_MGR_LOOPBACK_MODE, 0, __RW_MGR_READ_B2B);
-//
+//
// // read error word
// readdata = IORD_32DIRECT(BASE_RW_MGR, 0);
-//
+//
// // error word should be 0x00
-//
+//
// // read DI buffer
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 0*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 1*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 2*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 3*4, 0);
-//
+//
// // clear error word
// IOWR_32DIRECT (RW_MGR_RESET_READ_DATAPATH, 0, 0);
-//
-// // do dm read
+//
+// // do dm read
// IOWR_32DIRECT (RW_MGR_LOOPBACK_MODE, 0, __RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1);
-//
+//
// // read error word
// readdata = IORD_32DIRECT(BASE_RW_MGR, 0);
-//
+//
// // error word should be ff
-//
+//
// // read DI buffer
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 0*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 1*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 2*4, 0);
// readdata = IORD_32DIRECT(RW_MGR_DI_BASE + 3*4, 0);
-//
+//
// // exit loopback mode
// IOWR_32DIRECT (BASE_RW_MGR, 0, __RW_MGR_IDLE_LOOP2);
-//
+//
// // start of phy manager access
-//
+//
// readdata = IORD_32DIRECT (PHY_MGR_MAX_RLAT_WIDTH, 0);
// readdata = IORD_32DIRECT (PHY_MGR_MAX_AFI_WLAT_WIDTH, 0);
// readdata = IORD_32DIRECT (PHY_MGR_MAX_AFI_RLAT_WIDTH, 0);
// readdata = IORD_32DIRECT (PHY_MGR_CALIB_SKIP_STEPS, 0);
-// readdata = IORD_32DIRECT (PHY_MGR_CALIB_VFIFO_OFFSET, 0);
+// readdata = IORD_32DIRECT (PHY_MGR_CALIB_VFIFO_OFFSET, 0);
// readdata = IORD_32DIRECT (PHY_MGR_CALIB_LFIFO_OFFSET, 0);
-//
+//
// // start of data manager test
-//
+//
// readdata = IORD_32DIRECT (DATA_MGR_DRAM_CFG , 0);
// readdata = IORD_32DIRECT (DATA_MGR_MEM_T_WL , 0);
// readdata = IORD_32DIRECT (DATA_MGR_MEM_T_ADD , 0);
@@ -1560,7 +1560,7 @@ static inline void rw_mgr_mem_calibrate_read_load_patterns_all_ranks(void)
// readdata = IORD_32DIRECT (DATA_MGR_CS_WIDTH , 0);
// readdata = IORD_32DIRECT (DATA_MGR_ITF_WIDTH , 0);
// readdata = IORD_32DIRECT (DATA_MGR_DVC_WIDTH , 0);
-//
+//
//}
//USER try a read and see if it returns correct data back. has dummy reads inserted into the mix
@@ -1615,7 +1615,7 @@ static uint32_t rw_mgr_mem_calibrate_read_test(uint32_t rank_bgn, uint32_t group
tmp_bit_chk = 0;
for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS - 1;; vg--) {
- //USER reset the fifos to get pointers to known state
+ //USER reset the fifos to get pointers to known state
IOWR_32DIRECT(PHY_MGR_CMD_FIFO_RESET, 0, 0);
IOWR_32DIRECT(RW_MGR_RESET_READ_DATAPATH, 0, 0);
@@ -1664,7 +1664,7 @@ static inline uint32_t rw_mgr_mem_calibrate_read_test_all_ranks(uint32_t group,
static void rw_mgr_incr_vfifo(uint32_t grp, uint32_t * v)
{
- //USER fiddle with FIFO
+ //USER fiddle with FIFO
if (HARD_PHY) {
IOWR_32DIRECT(PHY_MGR_CMD_INC_VFIFO_HARD_PHY, 0, grp);
} else if (QUARTER_RATE_MODE && !HARD_VFIFO) {
@@ -1718,11 +1718,11 @@ static void rw_mgr_decr_vfifo(uint32_t grp, uint32_t * v)
}
}
-//USER find a good dqs enable to use
+//USER find a good dqs enable to use
#if NEWVERSION_DQSEN
-// Navid's version
+// Navid's version
static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
{
@@ -1823,7 +1823,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
if (i >= VFIFO_SIZE) {
- //USER cannot find working solution
+ //USER cannot find working solution
DPRINT(2, "find_dqs_en_phase: no vfifo/ptap/dtap");
return 0;
}
@@ -1831,13 +1831,13 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
work_end = work_bgn;
//USER If d is 0 then the working window covers a phase tap and we can follow the old procedure
- //USER otherwise, we've found the beginning, and we need to increment the dtaps until we find the end
+ //USER otherwise, we've found the beginning, and we need to increment the dtaps until we find the end
if (d == 0) {
//USER ********************************************************************
//USER * step 3a: if we have room, back off by one and increment in dtaps *
COV(EN_PHASE_PTAP_OVERLAP);
- //USER Special case code for backing up a phase
+ //USER Special case code for backing up a phase
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
@@ -1864,7 +1864,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
}
- //USER We have found a working dtap before the ptap found above
+ //USER We have found a working dtap before the ptap found above
if (found_begin == 1) {
max_working_cnt++;
}
@@ -1915,14 +1915,14 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
if (i >= VFIFO_SIZE + 1) {
- //USER cannot see edge of failing read
+ //USER cannot see edge of failing read
DPRINT(2, "find_dqs_en_phase: end: failed");
return 0;
}
//USER *********************************************************
//USER * step 5a: back off one from last, increment in dtaps *
- //USER Special case code for backing up a phase
+ //USER Special case code for backing up a phase
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
@@ -1941,7 +1941,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
} else {
//USER ********************************************************************
- //USER * step 3-5b: Find the right edge of the window using delay taps *
+ //USER * step 3-5b: Find the right edge of the window using delay taps *
COV(EN_PHASE_PTAP_NO_OVERLAP);
DPRINT(2, "find_dqs_en_phase: begin found: vfifo=%lu ptap=%lu dtap=%lu begin=%lu",
@@ -1956,7 +1956,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
//USER * The actual increment of dtaps is done outside of the if/else loop to share code
//USER Only here to counterbalance a subtract later on which is not needed if this branch
- //USER of the algorithm is taken
+ //USER of the algorithm is taken
max_working_cnt++;
}
@@ -1971,7 +1971,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
}
- //USER Go back to working dtap
+ //USER Go back to working dtap
if (d != 0) {
work_end -= IO_DELAY_PER_DQS_EN_DCHAIN_TAP;
}
@@ -1984,9 +1984,9 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
BFM_GBL_SET(dqs_enable_right_edge[grp].ps, work_end);
if (work_end >= work_bgn) {
- //USER we have a working range
+ //USER we have a working range
} else {
- //USER nil range
+ //USER nil range
DPRINT(2, "find_dqs_en_phase: end-2: failed");
return 0;
}
@@ -1995,12 +1995,12 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
// ***************************************************************
//USER * We need to calculate the number of dtaps that equal a ptap
- //USER * To do that we'll back up a ptap and re-find the edge of the
+ //USER * To do that we'll back up a ptap and re-find the edge of the
//USER * window using dtaps
DPRINT(2, "find_dqs_en_phase: calculate dtaps_per_ptap for tracking");
- //USER Special case code for backing up a phase
+ //USER Special case code for backing up a phase
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
@@ -2033,7 +2033,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
if (found_passing_read) {
- //USER Find a failing read
+ //USER Find a failing read
DPRINT(2, "find_dqs_en_phase: find failing read");
for (d = d + 1; d <= IO_DQS_EN_DELAY_MAX; d++) {
DPRINT(2, "find_dqs_en_phase: testing read d=%lu", d);
@@ -2069,7 +2069,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
tmp_delay = 0;
DPRINT(2, "work_bgn=%ld work_end=%ld work_mid=%ld", work_bgn, work_end, work_mid);
- //USER Get the middle delay to be less than a VFIFO delay
+ //USER Get the middle delay to be less than a VFIFO delay
for (p = 0; p <= IO_DQS_EN_PHASE_MAX; p++, tmp_delay += IO_DELAY_PER_OPA_TAP) ;
DPRINT(2, "vfifo ptap delay %ld", tmp_delay);
while (work_mid > tmp_delay)
@@ -2113,7 +2113,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
#if 0
-// Ryan's algorithm
+// Ryan's algorithm
static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
{
@@ -2201,20 +2201,20 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
if (i >= VFIFO_SIZE) {
- //USER cannot find working solution
+ //USER cannot find working solution
return 0;
}
min_working_p = p;
//USER If d is 0 then the working window covers a phase tap and we can follow the old procedure
- //USER otherwise, we've found the beginning, and we need to increment the dtaps until we find the end
+ //USER otherwise, we've found the beginning, and we need to increment the dtaps until we find the end
if (d == 0) {
//USER ********************************************************************
//USER * step 3a: if we have room, back off by one and increment in dtaps *
min_working_d = 0;
- //USER Special case code for backing up a phase
+ //USER Special case code for backing up a phase
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
@@ -2235,12 +2235,12 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
}
- //USER We have found a working dtap before the ptap found above
+ //USER We have found a working dtap before the ptap found above
if (found_begin == 1) {
min_working_p = p;
max_working_cnt++;
}
- //USER Restore VFIFO to old state before we decremented it
+ //USER Restore VFIFO to old state before we decremented it
p = p + 1;
if (p > IO_DQS_EN_PHASE_MAX) {
p = 0;
@@ -2284,14 +2284,14 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
if (i >= VFIFO_SIZE + 1) {
- //USER cannot see edge of failing read
+ //USER cannot see edge of failing read
return 0;
}
//USER *********************************************************
//USER * step 5a: back off one from last, increment in dtaps *
max_working_d = 0;
- //USER Special case code for backing up a phase
+ //USER Special case code for backing up a phase
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
@@ -2311,7 +2311,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
}
- //USER Go back to working dtap
+ //USER Go back to working dtap
if (d != 0) {
max_working_d = d - 1;
}
@@ -2319,7 +2319,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
} else {
//USER ********************************************************************
- //USER * step 3-5b: Find the right edge of the window using delay taps *
+ //USER * step 3-5b: Find the right edge of the window using delay taps *
max_working_p = min_working_p;
min_working_d = d;
@@ -2333,12 +2333,12 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
}
- //USER Go back to working dtap
+ //USER Go back to working dtap
if (d != 0) {
max_working_d = d - 1;
}
//USER Only here to counterbalance a subtract later on which is not needed if this branch
- //USER of the algorithm is taken
+ //USER of the algorithm is taken
max_working_cnt++;
}
@@ -2346,11 +2346,11 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
//USER * step 6: Find the centre of the window *
//USER If the number of working phases is even we will step back a phase and find the
- //USER edge with a larger delay chain tap
+ //USER edge with a larger delay chain tap
if ((max_working_cnt & 1) == 0) {
p = min_working_p + (max_working_cnt - 1) / 2;
- //USER Special case code for backing up a phase
+ //USER Special case code for backing up a phase
if (max_working_p == 0) {
max_working_p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
@@ -2378,7 +2378,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
}
- //USER Go back to working dtap
+ //USER Go back to working dtap
if (d != 0) {
max_working_d = d - 1;
}
@@ -2395,7 +2395,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
scc_mgr_set_dqs_en_phase_all_ranks(grp, p);
scc_mgr_set_dqs_en_delay_all_ranks(grp, d);
- //USER push vfifo until we can successfully calibrate
+ //USER push vfifo until we can successfully calibrate
for (i = 0; i < VFIFO_SIZE; i++) {
if (rw_mgr_mem_calibrate_read_test_all_ranks(grp, 1, PASS_ONE_BIT, &bit_chk, 0)) {
@@ -2415,7 +2415,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
#endif
#else
-// Val's original version
+// Val's original version
static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
{
@@ -2432,7 +2432,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
fail_cnt = 0;
- //USER first push vfifo until we get a failing read
+ //USER first push vfifo until we get a failing read
v = 0;
for (i = 0; i < VFIFO_SIZE; i++) {
if (!rw_mgr_mem_calibrate_read_test_all_ranks(grp, 1, PASS_ONE_BIT, &bit_chk, 0)) {
@@ -2462,7 +2462,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
rw_mgr_mem_calibrate_read_test_all_ranks(grp, NUM_READ_PB_TESTS,
PASS_ONE_BIT, &bit_chk, 0);
if (bit_chk) {
- //USER passing read
+ //USER passing read
if (max_working_cnt == 0) {
min_working_d = d;
@@ -2471,7 +2471,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
max_working_cnt++;
} else {
if (max_working_cnt > 0) {
- //USER already have one working value
+ //USER already have one working value
break;
}
}
@@ -2481,7 +2481,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
//USER fiddle with FIFO
rw_mgr_incr_vfifo(grp, &v);
} else {
- //USER found working solution!
+ //USER found working solution!
d = min_working_d + (max_working_cnt - 1) / 2;
@@ -2494,16 +2494,16 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
}
if (i >= VFIFO_SIZE + 1) {
- //USER cannot find working solution or cannot see edge of failing read
+ //USER cannot find working solution or cannot see edge of failing read
return 0;
}
- //USER in the case the number of working steps is even, use 50ps taps to further center the window
+ //USER in the case the number of working steps is even, use 50ps taps to further center the window
if ((max_working_cnt & 1) == 0) {
delay_per_ptap_mid = IO_DELAY_PER_OPA_TAP / 2;
- //USER increment in 50ps taps until we reach the required amount
+ //USER increment in 50ps taps until we reach the required amount
for (i = 0, j = 0; i <= IO_DQS_EN_DELAY_MAX && j < delay_per_ptap_mid;
i++, j += IO_DELAY_PER_DQS_EN_DCHAIN_TAP) ;
@@ -2513,7 +2513,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
scc_mgr_set_dqs_en_phase_all_ranks(grp, d);
- //USER push vfifo until we can successfully calibrate
+ //USER push vfifo until we can successfully calibrate
for (i = 0; i < VFIFO_SIZE; i++) {
if (rw_mgr_mem_calibrate_read_test_all_ranks
@@ -2582,7 +2582,7 @@ static inline uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_
return found;
}
-//USER per-bit deskew DQ and center
+//USER per-bit deskew DQ and center
#if NEWVERSION_RDDESKEW
@@ -2610,10 +2610,10 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
select_curr_shadow_reg_using_rank(rank_bgn);
- //USER per-bit deskew
+ //USER per-bit deskew
- //USER set the left and right edge of each bit to an illegal value
- //USER use (IO_IO_IN_DELAY_MAX + 1) as an illegal value
+ //USER set the left and right edge of each bit to an illegal value
+ //USER use (IO_IO_IN_DELAY_MAX + 1) as an illegal value
sticky_bit_chk = 0;
for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
left_edge[i] = IO_IO_IN_DELAY_MAX + 1;
@@ -2654,7 +2654,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
//USER Remember a passing test as the left_edge
left_edge[i] = d;
} else {
- //USER If a left edge has not been seen yet, then a future passing test will mark this edge as the right edge
+ //USER If a left edge has not been seen yet, then a future passing test will mark this edge as the right edge
if (left_edge[i] == IO_IO_IN_DELAY_MAX + 1) {
right_edge[i] = -(d + 1);
}
@@ -2667,7 +2667,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
}
}
- //USER Reset DQ delay chains to 0
+ //USER Reset DQ delay chains to 0
scc_mgr_apply_group_dq_in_delay(write_group, test_bgn, 0);
sticky_bit_chk = 0;
for (i = RW_MGR_MEM_DQ_PER_READ_DQS - 1;; i--) {
@@ -2675,14 +2675,14 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
DPRINT(2, "vfifo_center: left_edge[%lu]: %ld right_edge[%lu]: %ld", i, left_edge[i],
i, right_edge[i]);
- //USER Check for cases where we haven't found the left edge, which makes our assignment of the the
- //USER right edge invalid. Reset it to the illegal value.
+ //USER Check for cases where we haven't found the left edge, which makes our assignment of the the
+ //USER right edge invalid. Reset it to the illegal value.
if ((left_edge[i] == IO_IO_IN_DELAY_MAX + 1)
&& (right_edge[i] != IO_IO_IN_DELAY_MAX + 1)) {
right_edge[i] = IO_IO_IN_DELAY_MAX + 1;
DPRINT(2, "vfifo_center: reset right_edge[%lu]: %ld", i, right_edge[i]);
}
- //USER Reset sticky bit (except for bits where we have seen both the left and right edge)
+ //USER Reset sticky bit (except for bits where we have seen both the left and right edge)
sticky_bit_chk = sticky_bit_chk << 1;
if ((left_edge[i] != IO_IO_IN_DELAY_MAX + 1)
&& (right_edge[i] != IO_IO_IN_DELAY_MAX + 1)) {
@@ -2694,7 +2694,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
}
}
- //USER Search for the right edge of the window for each bit
+ //USER Search for the right edge of the window for each bit
for (d = 0; d <= IO_DQS_IN_DELAY_MAX - start_dqs; d++) {
scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs);
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) {
@@ -2708,7 +2708,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
IOWR_32DIRECT(SCC_MGR_UPD, 0, 0);
- //USER Stop searching when the read test doesn't pass AND when we've seen a passing read on every bit
+ //USER Stop searching when the read test doesn't pass AND when we've seen a passing read on every bit
if (use_read_test) {
stop =
!rw_mgr_mem_calibrate_read_test(rank_bgn, read_group, NUM_READ_PB_TESTS,
@@ -2734,11 +2734,11 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
} else {
for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
if (bit_chk & 1) {
- //USER Remember a passing test as the right_edge
+ //USER Remember a passing test as the right_edge
right_edge[i] = d;
} else {
if (d != 0) {
- //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
+ //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
if (right_edge[i] == IO_IO_IN_DELAY_MAX + 1) {
left_edge[i] = -(d + 1);
}
@@ -2748,7 +2748,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
&& left_edge[i] != IO_IO_IN_DELAY_MAX + 1) {
right_edge[i] = -1;
}
- //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
+ //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
else if (right_edge[i] == IO_IO_IN_DELAY_MAX + 1) {
left_edge[i] = -(d + 1);
}
@@ -2775,7 +2775,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
if ((left_edge[i] == IO_IO_IN_DELAY_MAX + 1)
|| (right_edge[i] == IO_IO_IN_DELAY_MAX + 1)) {
- //USER Restore delay chain settings before letting the loop in
+ //USER Restore delay chain settings before letting the loop in
//USER rw_mgr_mem_calibrate_vfifo to retry different dqs/ck relationships
scc_mgr_set_dqs_bus_in_delay(read_group, start_dqs);
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) {
@@ -2798,7 +2798,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
}
}
- //USER Find middle of window for each DQ bit
+ //USER Find middle of window for each DQ bit
mid_min = left_edge[0] - right_edge[0];
min_index = 0;
for (i = 1; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
@@ -2841,13 +2841,13 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
DPRINT(1, "vfifo_center: start_dqs=%ld start_dqs_en=%ld new_dqs=%ld mid_min=%ld",
start_dqs, IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS ? start_dqs_en : -1, new_dqs, mid_min);
- //USER Initialize data for export structures
+ //USER Initialize data for export structures
dqs_margin = IO_IO_IN_DELAY_MAX + 1;
dq_margin = IO_IO_IN_DELAY_MAX + 1;
- //USER add delay to bring centre of all DQ windows to the same "level"
+ //USER add delay to bring centre of all DQ windows to the same "level"
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++, p++) {
- //USER Use values before divide by 2 to reduce round off error
+ //USER Use values before divide by 2 to reduce round off error
shift_dq =
(left_edge[i] - right_edge[i] -
(left_edge[min_index] - right_edge[min_index])) / 2 + (orig_mid_min - mid_min);
@@ -2866,7 +2866,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
DPRINT(2, "vfifo_center: margin[%lu]=[%ld,%ld]", i,
left_edge[i] - shift_dq + (-mid_min), right_edge[i] + shift_dq - (-mid_min));
- //USER To determine values for export structures
+ //USER To determine values for export structures
if (left_edge[i] - shift_dq + (-mid_min) < dq_margin) {
dq_margin = left_edge[i] - shift_dq + (-mid_min);
}
@@ -2889,7 +2889,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t wr
scc_mgr_load_dqs(read_group);
if (update_fom) {
- //USER Export values
+ //USER Export values
gbl->fom_in +=
(dq_margin +
dqs_margin) / (RW_MGR_MEM_IF_READ_DQS_WIDTH / RW_MGR_MEM_IF_WRITE_DQS_WIDTH);
@@ -2940,7 +2940,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t gr
}
}
- //USER determine minimum working value for DQ
+ //USER determine minimum working value for DQ
dq_margin = IO_IO_IN_DELAY_MAX;
@@ -2950,7 +2950,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t gr
}
}
- //USER add delay to bring all DQ windows to the same "level"
+ //USER add delay to bring all DQ windows to the same "level"
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++, p++) {
if (max_working_dq[i] > dq_margin) {
@@ -2981,11 +2981,11 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t gr
scc_mgr_set_dqs_bus_in_delay(grp, start_dqs);
- //USER margin on the DQS pin
+ //USER margin on the DQS pin
dqs_margin = d - start_dqs - 1;
- //USER find mid point, +1 so that we don't go crazy pushing DQ
+ //USER find mid point, +1 so that we don't go crazy pushing DQ
mid = (dq_margin + dqs_margin + 1) / 2;
@@ -2993,7 +2993,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t gr
// TCLRPT_SET(debug_summary_report->fom_in, debug_summary_report->fom_in + (dq_margin + dqs_margin));
// TCLRPT_SET(debug_cal_report->cal_status_per_group[grp].fom_in, (dq_margin + dqs_margin));
- //USER center DQS ... if the headroom is setup properly we shouldn't need to
+ //USER center DQS ... if the headroom is setup properly we shouldn't need to
if (dqs_margin > mid) {
scc_mgr_set_dqs_bus_in_delay(grp, READ_SCC_DQS_IN_DELAY(grp) + dqs_margin - mid);
@@ -3011,7 +3011,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t gr
scc_mgr_load_dqs(grp);
- //USER center DQ
+ //USER center DQ
if (dq_margin > mid) {
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++, p++) {
@@ -3032,7 +3032,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t gr
#endif
//USER calibrate the read valid prediction FIFO.
-//USER
+//USER
//USER - read valid prediction will consist of finding a good DQS enable phase, DQS enable delay, DQS input phase, and DQS input delay.
//USER - we also do a per-bit deskew on the DQ lines.
@@ -3050,7 +3050,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, uint32_t test_bg
uint32_t failed_substage;
uint32_t dqs_in_dtaps, orig_start_dqs;
- //USER update info for sims
+ //USER update info for sims
reg_file_set_stage(CAL_STAGE_VFIFO);
@@ -3074,7 +3074,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, uint32_t test_bg
dtaps_per_ptap--;
tmp_delay = 0;
}
- //USER update info for sims
+ //USER update info for sims
reg_file_set_group(read_group);
@@ -3095,7 +3095,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, uint32_t test_bg
}
for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX && grp_calibrated == 0; p++) {
- //USER set a particular dqdqs phase
+ //USER set a particular dqdqs phase
if (DDRX) {
scc_mgr_set_dqdqs_output_phase_all_ranks(read_group, p);
}
@@ -3111,7 +3111,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group, uint32_t test_bg
BFM_GBL_SET(gwrite_pos[read_group].p, p);
BFM_GBL_SET(gwrite_pos[read_group].d, d);
- //USER Load up the patterns used by read calibration using current DQDQS phase
+ //USER Load up the patterns used by read calibration using current DQDQS phase
rw_mgr_mem_calibrate_read_load_patterns_all_ranks();
@@ -3209,7 +3209,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t g, uint32_t test_bgn)
uint32_t grp_calibrated;
uint32_t failed_substage;
- //USER update info for sims
+ //USER update info for sims
reg_file_set_stage(CAL_STAGE_VFIFO);
@@ -3217,18 +3217,18 @@ static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t g, uint32_t test_bgn)
failed_substage = CAL_SUBSTAGE_GUARANTEED_READ;
- //USER update info for sims
+ //USER update info for sims
reg_file_set_group(g);
grp_calibrated = 0;
for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX && grp_calibrated == 0; p++) {
- //USER set a particular dqdqs phase
+ //USER set a particular dqdqs phase
if (DDRX) {
scc_mgr_set_dqdqs_output_phase_all_ranks(g, p);
}
- //USER Load up the patterns used by read calibration using current DQDQS phase
+ //USER Load up the patterns used by read calibration using current DQDQS phase
rw_mgr_mem_calibrate_read_load_patterns_all_ranks();
if (!(gbl->phy_debug_mode_flags & PHY_DEBUG_DISABLE_GUARANTEED_READ)) {
@@ -3280,7 +3280,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_end(uint32_t read_group, uint32_t tes
uint32_t grp_calibrated;
uint32_t write_group;
- //USER update info for sims
+ //USER update info for sims
reg_file_set_stage(CAL_STAGE_VFIFO_AFTER_WRITES);
reg_file_set_sub_stage(CAL_SUBSTAGE_VFIFO_CENTER);
@@ -3292,7 +3292,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_end(uint32_t read_group, uint32_t tes
read_group / (RW_MGR_MEM_IF_READ_DQS_WIDTH / RW_MGR_MEM_IF_WRITE_DQS_WIDTH);
}
- //USER update info for sims
+ //USER update info for sims
reg_file_set_group(read_group);
grp_calibrated = 1;
@@ -3330,7 +3330,7 @@ static uint32_t rw_mgr_mem_calibrate_lfifo(void)
uint32_t found_one;
t_btfld bit_chk;
- //USER update info for sims
+ //USER update info for sims
reg_file_set_stage(CAL_STAGE_LFIFO);
reg_file_set_sub_stage(CAL_SUBSTAGE_READ_LATENCY);
@@ -3358,12 +3358,12 @@ static uint32_t rw_mgr_mem_calibrate_lfifo(void)
gbl->curr_read_lat--;
} while (gbl->curr_read_lat > 0);
- //USER reset the fifos to get pointers to known state
+ //USER reset the fifos to get pointers to known state
IOWR_32DIRECT(PHY_MGR_CMD_FIFO_RESET, 0, 0);
if (found_one) {
- //USER add a fudge factor to the read latency that was determined
+ //USER add a fudge factor to the read latency that was determined
gbl->curr_read_lat += 2;
IOWR_32DIRECT(PHY_MGR_PHY_RLAT, 0, gbl->curr_read_lat);
@@ -3508,13 +3508,13 @@ static uint32_t rw_mgr_mem_calibrate_write_test(uint32_t rank_bgn, uint32_t writ
continue;
}
- //USER set rank
+ //USER set rank
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
tmp_bit_chk = 0;
for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS - 1;; vg--) {
- //USER reset the fifos to get pointers to known state
+ //USER reset the fifos to get pointers to known state
IOWR_32DIRECT(PHY_MGR_CMD_FIFO_RESET, 0, 0);
tmp_bit_chk =
@@ -3584,24 +3584,24 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
reg_file_set_stage(CAL_STAGE_WLEVEL);
reg_file_set_sub_stage(CAL_SUBSTAGE_WORKING_DELAY);
- //USER maximum phases for the sweep
+ //USER maximum phases for the sweep
dtaps_per_ptap = IORD_32DIRECT(REG_FILE_DTAPS_PER_PTAP, 0);
- //USER starting phases
+ //USER starting phases
//USER update info for sims
reg_file_set_group(g);
- //USER starting and end range where writes work
+ //USER starting and end range where writes work
scc_mgr_spread_out2_delay_all_ranks(g, test_bgn);
work_bgn = 0;
work_end = 0;
- //USER step 1: find first working phase, increment in ptaps, and then in dtaps if ptaps doesn't find a working phase
+ //USER step 1: find first working phase, increment in ptaps, and then in dtaps if ptaps doesn't find a working phase
found_begin = 0;
tmp_delay = 0;
for (d = 0; d <= dtaps_per_ptap; d++, tmp_delay += IO_DELAY_PER_DCHAIN_TAP) {
@@ -3627,7 +3627,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
}
if (p > IO_DQDQS_OUT_PHASE_MAX + num_additional_fr_cycles * IO_DLL_CHAIN_LENGTH) {
- //USER fail, cannot find first working phase
+ //USER fail, cannot find first working phase
set_failing_group_stage(g, CAL_STAGE_WLEVEL, CAL_SUBSTAGE_WORKING_DELAY);
@@ -3639,12 +3639,12 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
reg_file_set_sub_stage(CAL_SUBSTAGE_LAST_WORKING_DELAY);
//USER If d is 0 then the working window covers a phase tap and we can follow the old procedure
- //USER otherwise, we've found the beginning, and we need to increment the dtaps until we find the end
+ //USER otherwise, we've found the beginning, and we need to increment the dtaps until we find the end
if (d == 0) {
COV(WLEVEL_PHASE_PTAP_OVERLAP);
work_end = work_bgn + IO_DELAY_PER_OPA_TAP;
- //USER step 2: if we have room, back off by one and increment in dtaps
+ //USER step 2: if we have room, back off by one and increment in dtaps
if (p > 0) {
int found = 0;
@@ -3693,7 +3693,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
BFM_GBL_SET(dqs_wlevel_left_edge[g].ps, work_bgn);
}
- //USER step 3: go forward from working phase to non working phase, increment in ptaps
+ //USER step 3: go forward from working phase to non working phase, increment in ptaps
for (p = p + 1;
p <= IO_DQDQS_OUT_PHASE_MAX + num_additional_fr_cycles * IO_DLL_CHAIN_LENGTH;
@@ -3707,7 +3707,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
}
}
- //USER step 4: back off one from last, increment in dtaps
+ //USER step 4: back off one from last, increment in dtaps
//USER The actual increment is done outside the if/else statement since it is shared with other code
p = p - 1;
@@ -3743,9 +3743,9 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
work_end -= IO_DELAY_PER_DCHAIN_TAP;
if (work_end >= work_bgn) {
- //USER we have a working range
+ //USER we have a working range
} else {
- //USER nil range
+ //USER nil range
set_failing_group_stage(g, CAL_STAGE_WLEVEL, CAL_SUBSTAGE_LAST_WORKING_DELAY);
@@ -3757,7 +3757,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
BFM_GBL_SET(dqs_wlevel_right_edge[g].d, d - 1);
BFM_GBL_SET(dqs_wlevel_right_edge[g].ps, work_end);
- //USER center
+ //USER center
work_mid = (work_bgn + work_end) / 2;
@@ -3819,20 +3819,20 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
reg_file_set_stage(CAL_STAGE_WLEVEL);
reg_file_set_sub_stage(CAL_SUBSTAGE_WORKING_DELAY);
- //USER maximum phases for the sweep
+ //USER maximum phases for the sweep
- //USER starting phases
+ //USER starting phases
//USER update info for sims
reg_file_set_group(g);
- //USER starting and end range where writes work
+ //USER starting and end range where writes work
work_bgn = 0;
work_end = 0;
- //USER step 1: find first working phase, increment in ptaps
+ //USER step 1: find first working phase, increment in ptaps
for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX; p++, work_bgn += IO_DELAY_PER_OPA_TAP) {
scc_mgr_set_dqdqs_output_phase_all_ranks(g, p);
@@ -3843,7 +3843,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
}
if (p > IO_DQDQS_OUT_PHASE_MAX) {
- //USER fail, cannot find first working phase
+ //USER fail, cannot find first working phase
set_failing_group_stage(g, CAL_STAGE_WLEVEL, CAL_SUBSTAGE_WORKING_DELAY);
@@ -3854,7 +3854,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
reg_file_set_sub_stage(CAL_SUBSTAGE_LAST_WORKING_DELAY);
- //USER step 2: if we have room, back off by one and increment in dtaps
+ //USER step 2: if we have room, back off by one and increment in dtaps
if (p > 0) {
scc_mgr_set_dqdqs_output_phase_all_ranks(g, p - 1);
@@ -3873,7 +3873,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
scc_mgr_apply_group_all_out_delay_all_ranks(g, test_bgn, 0);
}
- //USER step 3: go forward from working phase to non working phase, increment in ptaps
+ //USER step 3: go forward from working phase to non working phase, increment in ptaps
for (p = p + 1; p <= IO_DQDQS_OUT_PHASE_MAX; p++, work_end += IO_DELAY_PER_OPA_TAP) {
scc_mgr_set_dqdqs_output_phase_all_ranks(g, p);
@@ -3883,7 +3883,7 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
}
}
- //USER step 4: back off one from last, increment in dtaps
+ //USER step 4: back off one from last, increment in dtaps
scc_mgr_set_dqdqs_output_phase_all_ranks(g, p - 1);
@@ -3900,16 +3900,16 @@ static uint32_t rw_mgr_mem_calibrate_wlevel(uint32_t g, uint32_t test_bgn)
scc_mgr_apply_group_all_out_delay_all_ranks(g, test_bgn, 0);
if (work_end > work_bgn) {
- //USER we have a working range
+ //USER we have a working range
} else {
- //USER nil range
+ //USER nil range
set_failing_group_stage(g, CAL_STAGE_WLEVEL, CAL_SUBSTAGE_LAST_WORKING_DELAY);
return 0;
}
- //USER center
+ //USER center
work_mid = (work_bgn + work_end) / 2;
@@ -3963,9 +3963,9 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
select_curr_shadow_reg_using_rank(rank_bgn);
- //USER per-bit deskew
+ //USER per-bit deskew
- //USER set the left and right edge of each bit to an illegal value
+ //USER set the left and right edge of each bit to an illegal value
//USER use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value
sticky_bit_chk = 0;
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
@@ -3979,7 +3979,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
IOWR_32DIRECT(SCC_MGR_UPD, 0, 0);
- //USER Stop searching when the read test doesn't pass AND when we've seen a passing read on every bit
+ //USER Stop searching when the read test doesn't pass AND when we've seen a passing read on every bit
stop =
!rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 0, PASS_ONE_BIT,
&bit_chk, 0);
@@ -3998,7 +3998,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
//USER Remember a passing test as the left_edge
left_edge[i] = d;
} else {
- //USER If a left edge has not been seen yet, then a future passing test will mark this edge as the right edge
+ //USER If a left edge has not been seen yet, then a future passing test will mark this edge as the right edge
if (left_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) {
right_edge[i] = -(d + 1);
}
@@ -4011,7 +4011,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
}
}
- //USER Reset DQ delay chains to 0
+ //USER Reset DQ delay chains to 0
scc_mgr_apply_group_dq_out1_delay(write_group, test_bgn, 0);
sticky_bit_chk = 0;
for (i = RW_MGR_MEM_DQ_PER_WRITE_DQS - 1;; i--) {
@@ -4019,14 +4019,14 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
DPRINT(2, "write_center: left_edge[%lu]: %ld right_edge[%lu]: %ld", i, left_edge[i],
i, right_edge[i]);
- //USER Check for cases where we haven't found the left edge, which makes our assignment of the the
- //USER right edge invalid. Reset it to the illegal value.
+ //USER Check for cases where we haven't found the left edge, which makes our assignment of the the
+ //USER right edge invalid. Reset it to the illegal value.
if ((left_edge[i] == IO_IO_OUT1_DELAY_MAX + 1)
&& (right_edge[i] != IO_IO_OUT1_DELAY_MAX + 1)) {
right_edge[i] = IO_IO_OUT1_DELAY_MAX + 1;
DPRINT(2, "write_center: reset right_edge[%lu]: %ld", i, right_edge[i]);
}
- //USER Reset sticky bit (except for bits where we have seen the left edge)
+ //USER Reset sticky bit (except for bits where we have seen the left edge)
sticky_bit_chk = sticky_bit_chk << 1;
if ((left_edge[i] != IO_IO_OUT1_DELAY_MAX + 1)) {
sticky_bit_chk = sticky_bit_chk | 1;
@@ -4037,7 +4037,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
}
}
- //USER Search for the right edge of the window for each bit
+ //USER Search for the right edge of the window for each bit
for (d = 0; d <= IO_IO_OUT1_DELAY_MAX - start_dqs; d++) {
scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, d + start_dqs);
@@ -4045,7 +4045,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
if (QDRII) {
rw_mgr_mem_dll_lock_wait();
}
- //USER Stop searching when the read test doesn't pass AND when we've seen a passing read on every bit
+ //USER Stop searching when the read test doesn't pass AND when we've seen a passing read on every bit
stop =
!rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 0, PASS_ONE_BIT,
&bit_chk, 0);
@@ -4072,11 +4072,11 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
} else {
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
if (bit_chk & 1) {
- //USER Remember a passing test as the right_edge
+ //USER Remember a passing test as the right_edge
right_edge[i] = d;
} else {
if (d != 0) {
- //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
+ //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
if (right_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) {
left_edge[i] = -(d + 1);
}
@@ -4086,7 +4086,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
&& left_edge[i] != IO_IO_OUT1_DELAY_MAX + 1) {
right_edge[i] = -1;
}
- //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
+ //USER If a right edge has not been seen yet, then a future passing test will mark this edge as the left edge
else if (right_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) {
left_edge[i] = -(d + 1);
}
@@ -4114,7 +4114,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
}
}
- //USER Find middle of window for each DQ bit
+ //USER Find middle of window for each DQ bit
mid_min = left_edge[0] - right_edge[0];
min_index = 0;
for (i = 1; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
@@ -4142,13 +4142,13 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
DPRINT(1, "write_center: start_dqs=%ld new_dqs=%ld mid_min=%ld", start_dqs, new_dqs,
mid_min);
- //USER Initialize data for export structures
+ //USER Initialize data for export structures
dqs_margin = IO_IO_OUT1_DELAY_MAX + 1;
dq_margin = IO_IO_OUT1_DELAY_MAX + 1;
- //USER add delay to bring centre of all DQ windows to the same "level"
+ //USER add delay to bring centre of all DQ windows to the same "level"
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
- //USER Use values before divide by 2 to reduce round off error
+ //USER Use values before divide by 2 to reduce round off error
shift_dq =
(left_edge[i] - right_edge[i] -
(left_edge[min_index] - right_edge[min_index])) / 2 + (orig_mid_min - mid_min);
@@ -4166,7 +4166,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
DPRINT(2, "write_center: margin[%lu]=[%ld,%ld]", i,
left_edge[i] - shift_dq + (-mid_min), right_edge[i] + shift_dq - (-mid_min));
- //USER To determine values for export structures
+ //USER To determine values for export structures
if (left_edge[i] - shift_dq + (-mid_min) < dq_margin) {
dq_margin = left_edge[i] - shift_dq + (-mid_min);
}
@@ -4175,7 +4175,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
}
}
- //USER Move DQS
+ //USER Move DQS
if (QDRII) {
scc_mgr_set_group_dqs_io_and_oct_out1_gradual(write_group, new_dqs);
} else {
@@ -4185,7 +4185,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
DPRINT(2, "write_center: DM");
- //USER set the left and right edge of each bit to an illegal value
+ //USER set the left and right edge of each bit to an illegal value
//USER use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value
left_edge[0] = IO_IO_OUT1_DELAY_MAX + 1;
right_edge[0] = IO_IO_OUT1_DELAY_MAX + 1;
@@ -4204,7 +4204,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
if (bgn_curr == IO_IO_OUT1_DELAY_MAX + 1) {
bgn_curr = -d;
}
- //USER If current window is bigger than best seen. Set best seen to be current window
+ //USER If current window is bigger than best seen. Set best seen to be current window
if ((end_curr - bgn_curr + 1) > win_best) {
win_best = end_curr - bgn_curr + 1;
bgn_best = bgn_curr;
@@ -4296,7 +4296,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
DPRINT(2, "dm_calib: left=%ld right=%ld mid=%ld dm_margin=%ld",
left_edge[0], right_edge[0], mid, dm_margin);
- //USER Export values
+ //USER Export values
gbl->fom_out += dq_margin + dqs_margin;
DPRINT(2, "write_center: dq_margin=%ld dqs_margin=%ld dm_margin=%ld", dq_margin, dqs_margin,
@@ -4321,7 +4321,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
uint32_t start_dqs;
uint32_t stop;
- //USER per-bit deskew
+ //USER per-bit deskew
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
max_working_dq[i] = 0;
@@ -4347,7 +4347,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
scc_mgr_apply_group_dq_out1_delay(write_group, test_bgn, 0);
- //USER determine minimum of maximums
+ //USER determine minimum of maximums
dq_margin = IO_IO_OUT1_DELAY_MAX;
@@ -4357,7 +4357,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
}
}
- //USER add delay to center DQ windows
+ //USER add delay to center DQ windows
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
if (max_working_dq[i] > dq_margin) {
@@ -4393,7 +4393,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
dqs_margin = d - start_dqs - 1;
- //USER time to center, +1 so that we don't go crazy centering DQ
+ //USER time to center, +1 so that we don't go crazy centering DQ
mid = (dq_margin + dqs_margin + 1) / 2;
@@ -4402,7 +4402,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
scc_mgr_load_dqs_io();
scc_mgr_load_dqs_for_write_group(write_group);
- //USER center dq
+ //USER center dq
if (dq_margin > mid) {
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
@@ -4413,7 +4413,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t w
dqs_margin += dq_margin - mid;
dq_margin -= dq_margin - mid;
}
- //USER do dm centering
+ //USER do dm centering
if (!RLDRAMX) {
dm_margin = IO_IO_OUT1_DELAY_MAX;
@@ -4496,7 +4496,7 @@ static uint32_t rw_mgr_mem_calibrate_writes(uint32_t rank_bgn, uint32_t g, uint3
reg_file_set_stage(CAL_STAGE_WRITES);
reg_file_set_sub_stage(CAL_SUBSTAGE_WRITES_CENTER);
- //USER starting phases
+ //USER starting phases
//USER update info for sims
@@ -4510,7 +4510,7 @@ static uint32_t rw_mgr_mem_calibrate_writes(uint32_t rank_bgn, uint32_t g, uint3
return 1;
}
-//USER precharge all banks and activate row 0 in bank "000..." and bank "111..."
+//USER precharge all banks and activate row 0 in bank "000..." and bank "111..."
static void mem_precharge_and_activate(void)
{
uint32_t r;
@@ -4524,7 +4524,7 @@ static void mem_precharge_and_activate(void)
//USER set rank
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
- //USER precharge all banks ...
+ //USER precharge all banks ...
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_PRECHARGE_ALL);
IOWR_32DIRECT(RW_MGR_LOAD_CNTR_0, 0, 0x0F);
@@ -4533,7 +4533,7 @@ static void mem_precharge_and_activate(void)
IOWR_32DIRECT(RW_MGR_LOAD_CNTR_1, 0, 0x0F);
IOWR_32DIRECT(RW_MGR_LOAD_JUMP_ADD_1, 0, __RW_MGR_ACTIVATE_0_AND_1_WAIT2);
- //USER activate rows
+ //USER activate rows
IOWR_32DIRECT(RW_MGR_RUN_SINGLE_GROUP, 0, __RW_MGR_ACTIVATE_0_AND_1);
}
}
@@ -4548,7 +4548,7 @@ static void mem_config(void)
uint32_t rw_wl_nop_cycles;
uint32_t max_latency;
- //USER read in write and read latency
+ //USER read in write and read latency
wlat = IORD_32DIRECT(MEM_T_WL_ADD, 0);
wlat += IORD_32DIRECT(DATA_MGR_MEM_T_ADD, 0); /* WL for hard phy does not include additive latency */
@@ -4595,23 +4595,23 @@ static void mem_config(void)
//USER configure for a burst length of 8
if (QUARTER_RATE_MODE) {
- //USER write latency
+ //USER write latency
wlat = (wlat + 5) / 4 + 1;
//USER set a pretty high read latency initially
gbl->curr_read_lat = (rlat + 1) / 4 + 8;
} else if (HALF_RATE_MODE) {
- //USER write latency
+ //USER write latency
wlat = (wlat - 1) / 2 + 1;
- //USER set a pretty high read latency initially
+ //USER set a pretty high read latency initially
gbl->curr_read_lat = (rlat + 1) / 2 + 8;
} else {
- //USER write latency
+ //USER write latency
// Adjust Write Latency for Hard PHY
wlat = wlat + 1;
- //USER set a pretty high read latency initially
+ //USER set a pretty high read latency initially
gbl->curr_read_lat = rlat + 16;
}
@@ -4620,7 +4620,7 @@ static void mem_config(void)
}
IOWR_32DIRECT(PHY_MGR_PHY_RLAT, 0, gbl->curr_read_lat);
- //USER advertise write latency
+ //USER advertise write latency
gbl->curr_write_lat = wlat;
IOWR_32DIRECT(PHY_MGR_AFI_WLAT, 0, wlat - 2);
@@ -4636,7 +4636,7 @@ static void mem_skip_calibrate(void)
uint32_t vfifo_offset;
uint32_t i, j, r;
- // Need to update every shadow register set used by the interface
+ // Need to update every shadow register set used by the interface
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r += NUM_RANKS_PER_SHADOW_REG) {
// Strictly speaking this should be called once per group to make
@@ -4653,7 +4653,7 @@ static void mem_skip_calibrate(void)
//
// Write data arrives to the I/O two cycles before write latency is reached (720 deg).
// -> due to bit-slip in a/c bus
- // -> to allow board skew where dqs is longer than ck
+ // -> to allow board skew where dqs is longer than ck
// -> how often can this happen!?
// -> can claim back some ptaps for high freq support if we can relax this, but i digress...
//
@@ -4683,7 +4683,7 @@ static void mem_skip_calibrate(void)
IOWR_32DIRECT(SCC_MGR_UPD, 0, 0);
}
- // Compensate for simulation model behaviour
+ // Compensate for simulation model behaviour
for (i = 0; i < RW_MGR_MEM_IF_READ_DQS_WIDTH; i++) {
scc_mgr_set_dqs_bus_in_delay(i, 10);
scc_mgr_load_dqs(i);
@@ -4741,7 +4741,7 @@ static uint32_t mem_calibrate(void)
}
if (((DYNAMIC_CALIB_STEPS) & CALIB_SKIP_ALL) == CALIB_SKIP_ALL) {
- //USER Set VFIFO and LFIFO to instant-on settings in skip calibration mode
+ //USER Set VFIFO and LFIFO to instant-on settings in skip calibration mode
mem_skip_calibrate();
} else {
@@ -4781,7 +4781,7 @@ static uint32_t mem_calibrate(void)
RW_MGR_MEM_IF_WRITE_DQS_WIDTH && group_failed == 0;
read_group++, read_test_bgn += RW_MGR_MEM_DQ_PER_READ_DQS) {
- //USER Calibrate the VFIFO
+ //USER Calibrate the VFIFO
if (!((STATIC_CALIB_STEPS) & CALIB_SKIP_VFIFO)) {
if (!rw_mgr_mem_calibrate_vfifo
(read_group, read_test_bgn)) {
@@ -4797,7 +4797,7 @@ static uint32_t mem_calibrate(void)
}
}
- //USER level writes (or align DK with CK for RLDRAMX)
+ //USER level writes (or align DK with CK for RLDRAMX)
if (group_failed == 0) {
if ((DDRX || RLDRAMII) && !(ARRIAV || CYCLONEV)) {
if (!((STATIC_CALIB_STEPS) & CALIB_SKIP_WLEVEL)) {
@@ -4815,7 +4815,7 @@ static uint32_t mem_calibrate(void)
}
}
}
- //USER Calibrate the output side
+ //USER Calibrate the output side
if (group_failed == 0) {
for (rank_bgn = 0, sr = 0;
rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS;
@@ -4899,7 +4899,7 @@ static uint32_t mem_calibrate(void)
if (failing_groups != 0) {
return 0;
}
- //USER Calibrate the LFIFO
+ //USER Calibrate the LFIFO
if (!((STATIC_CALIB_STEPS) & CALIB_SKIP_LFIFO)) {
//USER If we're skipping groups as part of debug, don't calibrate LFIFO
if (param->skip_groups == 0) {
@@ -4952,7 +4952,7 @@ static uint32_t run_mem_calibrate(void)
#endif
}
- //USER Handoff
+ //USER Handoff
//USER Don't return control of the PHY back to AFI when in debug mode
if ((gbl->phy_debug_mode_flags & PHY_DEBUG_IN_DEBUG_MODE) == 0) {
@@ -5045,7 +5045,7 @@ static void initialize_hps_phy(void)
// These may need to be included also:
// wrap_back_en (false)
// atpg_en (false)
- // pipelineglobalenable (true)
+ // pipelineglobalenable (true)
uint32_t reg;
// Tracking also gets configured here because it's in the same register
@@ -5148,7 +5148,7 @@ static int socfpga_mem_calibration(void)
// Set the calibration enabled by default
gbl->phy_debug_mode_flags |= PHY_DEBUG_ENABLE_CAL_RPT;
// Only enable margining by default if requested
- // Only sweep all groups (regardless of fail state) by default if requested
+ // Only sweep all groups (regardless of fail state) by default if requested
//Set enabled read test by default
// Initialize the register file
diff --git a/arch/blackfin/cpu-bf561/start.S b/arch/blackfin/cpu-bf561/start.S
index 96da6b5..56c5e84 100644
--- a/arch/blackfin/cpu-bf561/start.S
+++ b/arch/blackfin/cpu-bf561/start.S
@@ -56,7 +56,7 @@ _stext:
SSYNC;
/* As per HW reference manual DAG registers,
- * DATA and Address resgister shall be zero'd
+ * DATA and Address resgister shall be zero'd
* in initialization, after a reset state
*/
r1 = 0; /* Data registers zero'd */
@@ -73,7 +73,7 @@ _stext:
p3 = 0;
p4 = 0;
p5 = 0;
-
+
i0 = 0; /* DAG Registers zero'd */
i1 = 0;
i2 = 0;
@@ -124,7 +124,7 @@ no_soft_reset:
r1 = 0;
LSETUP(4,4) lc0 = p1;
[ p0 ++ ] = r1;
-
+
p0.h = hi(SIC_IWR);
p0.l = lo(SIC_IWR);
r0.l = 0x1;
@@ -217,8 +217,8 @@ _real_start:
#ifdef CONFIG_BF537
-/* Initialise General-Purpose I/O Modules on BF537
- * Rev 0.0 Anomaly 05000212 - PORTx_FER,
+/* Initialise General-Purpose I/O Modules on BF537
+ * Rev 0.0 Anomaly 05000212 - PORTx_FER,
* PORT_MUX Registers Do Not accept "writes" correctly
*/
p0.h = hi(PORTF_FER);
@@ -292,8 +292,8 @@ DMA:
/* Set Destination DMAConfig = DMA Enable,
Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
-
-WAIT_DMA_DONE:
+
+WAIT_DMA_DONE:
p0.h = hi(MDMA_D0_IRQ_STATUS);
p0.l = lo(MDMA_D0_IRQ_STATUS);
R0 = W[P0](Z);
diff --git a/arch/blackfin/include/asm/cpu/cdefBF561.h b/arch/blackfin/include/asm/cpu/cdefBF561.h
index 60fdf1e..9a763df 100644
--- a/arch/blackfin/include/asm/cpu/cdefBF561.h
+++ b/arch/blackfin/include/asm/cpu/cdefBF561.h
@@ -11,7 +11,7 @@
#ifndef _CDEF_BF561_H
#define _CDEF_BF561_H
-/*
+/*
* #if !defined(__ADSPBF561__)
* #warning cdefBF561.h should only be included for BF561 chip.
* #endif
@@ -299,7 +299,7 @@
#define pPPI0_DELAY (volatile unsigned short *)PPI0_DELAY
#define pPPI0_FRAME (volatile unsigned short *)PPI0_FRAME
-/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF)*/
+/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF)*/
#define pPPI1_CONTROL (volatile unsigned short *)PPI1_CONTROL
#define pPPI1_STATUS (volatile unsigned short *)PPI1_STATUS
#define pPPI1_COUNT (volatile unsigned short *)PPI1_COUNT
diff --git a/arch/blackfin/include/asm/cpu/defBF561.h b/arch/blackfin/include/asm/cpu/defBF561.h
index 11de2be..5ab53ab 100644
--- a/arch/blackfin/include/asm/cpu/defBF561.h
+++ b/arch/blackfin/include/asm/cpu/defBF561.h
@@ -36,7 +36,7 @@
// System Reset and Interrupt Controller registers for
// core A (0xFFC0 0100-0xFFC0 01FF)
#define SICA_SWRST 0xFFC00100 // Software Reset register
-#define SICA_SYSCR 0xFFC00104 // System Reset Configuration
+#define SICA_SYSCR 0xFFC00104 // System Reset Configuration
// register
#define SICA_RVECT 0xFFC00108 // SIC Reset Vector Address
// Register
@@ -146,22 +146,22 @@
// Register
// Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF)
-#define TIMER0_CONFIG 0xFFC00600 // Timer0 Configuration
+#define TIMER0_CONFIG 0xFFC00600 // Timer0 Configuration
// register
#define TIMER0_COUNTER 0xFFC00604 // Timer0 Counter register
#define TIMER0_PERIOD 0xFFC00608 // Timer0 Period register
#define TIMER0_WIDTH 0xFFC0060C // Timer0 Width register
-#define TIMER1_CONFIG 0xFFC00610 // Timer1 Configuration
+#define TIMER1_CONFIG 0xFFC00610 // Timer1 Configuration
// register
#define TIMER1_COUNTER 0xFFC00614 // Timer1 Counter register
#define TIMER1_PERIOD 0xFFC00618 // Timer1 Period register
#define TIMER1_WIDTH 0xFFC0061C // Timer1 Width register
-#define TIMER2_CONFIG 0xFFC00620 // Timer2 Configuration
+#define TIMER2_CONFIG 0xFFC00620 // Timer2 Configuration
// register
#define TIMER2_COUNTER 0xFFC00624 // Timer2 Counter register
#define TIMER2_PERIOD 0xFFC00628 // Timer2 Period register
#define TIMER2_WIDTH 0xFFC0062C // Timer2 Width register
-#define TIMER3_CONFIG 0xFFC00630 // Timer3 Configuration
+#define TIMER3_CONFIG 0xFFC00630 // Timer3 Configuration
// register
#define TIMER3_COUNTER 0xFFC00634 // Timer3 Counter register
#define TIMER3_PERIOD 0xFFC00638 // Timer3 Period register
@@ -171,17 +171,17 @@
#define TIMER4_COUNTER 0xFFC00644 // Timer4 Counter register
#define TIMER4_PERIOD 0xFFC00648 // Timer4 Period register
#define TIMER4_WIDTH 0xFFC0064C // Timer4 Width register
-#define TIMER5_CONFIG 0xFFC00650 // Timer5 Configuration
+#define TIMER5_CONFIG 0xFFC00650 // Timer5 Configuration
// register
#define TIMER5_COUNTER 0xFFC00654 // Timer5 Counter register
#define TIMER5_PERIOD 0xFFC00658 // Timer5 Period register
#define TIMER5_WIDTH 0xFFC0065C // Timer5 Width register
-#define TIMER6_CONFIG 0xFFC00660 // Timer6 Configuration
+#define TIMER6_CONFIG 0xFFC00660 // Timer6 Configuration
// register
#define TIMER6_COUNTER 0xFFC00664 // Timer6 Counter register
#define TIMER6_PERIOD 0xFFC00668 // Timer6 Period register
#define TIMER6_WIDTH 0xFFC0066C // Timer6 Width register
-#define TIMER7_CONFIG 0xFFC00670 // Timer7 Configuration
+#define TIMER7_CONFIG 0xFFC00670 // Timer7 Configuration
// register
#define TIMER7_COUNTER 0xFFC00674 // Timer7 Counter register
#define TIMER7_PERIOD 0xFFC00678 // Timer7 Period register
@@ -192,22 +192,22 @@
#define TMRS8_STATUS 0xFFC00688 // Timer Status register
// Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF)
-#define TIMER8_CONFIG 0xFFC01600 // Timer8 Configuration
+#define TIMER8_CONFIG 0xFFC01600 // Timer8 Configuration
// register
#define TIMER8_COUNTER 0xFFC01604 // Timer8 Counter register
#define TIMER8_PERIOD 0xFFC01608 // Timer8 Period register
#define TIMER8_WIDTH 0xFFC0160C // Timer8 Width register
-#define TIMER9_CONFIG 0xFFC01610 // Timer9 Configuration
+#define TIMER9_CONFIG 0xFFC01610 // Timer9 Configuration
// register
#define TIMER9_COUNTER 0xFFC01614 // Timer9 Counter register
#define TIMER9_PERIOD 0xFFC01618 // Timer9 Period register
#define TIMER9_WIDTH 0xFFC0161C // Timer9 Width register
-#define TIMER10_CONFIG 0xFFC01620 // Timer10 Configuration
+#define TIMER10_CONFIG 0xFFC01620 // Timer10 Configuration
// register
#define TIMER10_COUNTER 0xFFC01624 // Timer10 Counter register
#define TIMER10_PERIOD 0xFFC01628 // Timer10 Period register
#define TIMER10_WIDTH 0xFFC0162C // Timer10 Width register
-#define TIMER11_CONFIG 0xFFC01630 // Timer11 Configuration
+#define TIMER11_CONFIG 0xFFC01630 // Timer11 Configuration
// register
#define TIMER11_COUNTER 0xFFC01634 // Timer11 Counter register
#define TIMER11_PERIOD 0xFFC01638 // Timer11 Period register
@@ -240,9 +240,9 @@
// register
#define FIO0_DIR 0xFFC00730 // Flag Direction register
#define FIO0_POLAR 0xFFC00734 // Flag Polarity register
-#define FIO0_EDGE 0xFFC00738 // Flag Interrupt Sensitivity
+#define FIO0_EDGE 0xFFC00738 // Flag Interrupt Sensitivity
// register
-#define FIO0_BOTH 0xFFC0073C // Flag Set on Both Edges
+#define FIO0_BOTH 0xFFC0073C // Flag Set on Both Edges
// register
#define FIO0_INEN 0xFFC00740 // Flag Input Enable register
@@ -269,9 +269,9 @@
// register
#define FIO1_DIR 0xFFC01530 // Flag Direction register
#define FIO1_POLAR 0xFFC01534 // Flag Polarity register
-#define FIO1_EDGE 0xFFC01538 // Flag Interrupt Sensitivity
+#define FIO1_EDGE 0xFFC01538 // Flag Interrupt Sensitivity
// register
-#define FIO1_BOTH 0xFFC0153C // Flag Set on Both Edges
+#define FIO1_BOTH 0xFFC0153C // Flag Set on Both Edges
// register
#define FIO1_INEN 0xFFC01540 // Flag Input Enable register
@@ -298,9 +298,9 @@
// register
#define FIO2_DIR 0xFFC01730 // Flag Direction register
#define FIO2_POLAR 0xFFC01734 // Flag Polarity register
-#define FIO2_EDGE 0xFFC01738 // Flag Interrupt Sensitivity
+#define FIO2_EDGE 0xFFC01738 // Flag Interrupt Sensitivity
// register
-#define FIO2_BOTH 0xFFC0173C // Flag Set on Both Edges
+#define FIO2_BOTH 0xFFC0173C // Flag Set on Both Edges
// register
#define FIO2_INEN 0xFFC01740 // Flag Input Enable register
@@ -386,8 +386,8 @@
#define SPORT1_MRCS3 0xFFC0095C // SPORT1 Multi-Channel
// Receive Select Register 3
-// Asynchronous Memory Controller - External Bus Interface Unit
-#define EBIU_AMGCTL 0xFFC00A00 // Asynchronous Memory
+// Asynchronous Memory Controller - External Bus Interface Unit
+#define EBIU_AMGCTL 0xFFC00A00 // Asynchronous Memory
// Global Control Register
#define EBIU_AMBCTL0 0xFFC00A04 // Asynchronous Memory
// Bank Control Register 0
@@ -395,10 +395,10 @@
// Bank Control Register 1
// SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)
-#define EBIU_SDGCTL 0xFFC00A10 // SDRAM Global Control
+#define EBIU_SDGCTL 0xFFC00A10 // SDRAM Global Control
// Register
#define EBIU_SDBCTL 0xFFC00A14 // SDRAM Bank Control Register
-#define EBIU_SDRRC 0xFFC00A18 // SDRAM Refresh Rate Control
+#define EBIU_SDRRC 0xFFC00A18 // SDRAM Refresh Rate Control
// Register
#define EBIU_SDSTAT 0xFFC00A1C // SDRAM Status Register
@@ -442,7 +442,7 @@
// Addr Increment
#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 // DMA1 Channel 0 Current
// Descriptor Pointer
-#define DMA1_0_CURR_ADDR 0xFFC01C24 // DMA1 Channel 0 Current
+#define DMA1_0_CURR_ADDR 0xFFC01C24 // DMA1 Channel 0 Current
// Address Pointer
#define DMA1_0_CURR_X_COUNT 0xFFC01C30 // DMA1 Channel 0 Current Inner
// Loop Count
@@ -710,7 +710,7 @@
// Loop Count
#define DMA1_10_IRQ_STATUS 0xFFC01EA8 // DMA1 Channel 10 Interrupt
// /Status Register
-#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC // DMA1 Channel 10 Peripheral
+#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC // DMA1 Channel 10 Peripheral
// Map Register
#define DMA1_11_CONFIG 0xFFC01EC8 // DMA1 Channel 11 Configuration
@@ -736,7 +736,7 @@
// Loop Count
#define DMA1_11_IRQ_STATUS 0xFFC01EE8 // DMA1 Channel 11 Interrupt
// /Status Register
-#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC // DMA1 Channel 11 Peripheral
+#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC // DMA1 Channel 11 Peripheral
// Map Register
// Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF)
@@ -1134,7 +1134,7 @@
// Loop Count
#define DMA2_10_IRQ_STATUS 0xFFC00EA8 // DMA2 Channel 10 Interrupt
// /Status Register
-#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC // DMA2 Channel 10 Peripheral
+#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC // DMA2 Channel 10 Peripheral
// Map Register
#define DMA2_11_CONFIG 0xFFC00EC8 // DMA2 Channel 11 Configuration
@@ -1160,7 +1160,7 @@
// Loop Count
#define DMA2_11_IRQ_STATUS 0xFFC00EE8 // DMA2 Channel 11 Interrupt
// /Status Register
-#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC // DMA2 Channel 11 Peripheral
+#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC // DMA2 Channel 11 Peripheral
// Map Register
// Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF)
@@ -1190,7 +1190,7 @@
#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 // MemDMA2 Stream 0 Dest
// Interrupt/Status Register
#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C // MemDMA2 Stream 0
- // Destination Peripheral Map
+ // Destination Peripheral Map
// register
#define MDMA2_S0_CONFIG 0xFFC00F48 // MemDMA2 Stream 0 Source
@@ -1247,7 +1247,7 @@
#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 // MemDMA2 Stream 1 Destination
// Interrupt/Status Reg
#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC // MemDMA2 Stream 1
- // Destination Peripheral Map
+ // Destination Peripheral Map
// register
#define MDMA2_S1_CONFIG 0xFFC00FC8 // MemDMA2 Stream 1 Source
@@ -1280,7 +1280,7 @@
// Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF)
#define IMDMA_D0_CONFIG 0xFFC01808 // IMDMA Stream 0 Destination
// Configuration
-#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 // IMDMA Stream 0 Destination
+#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 // IMDMA Stream 0 Destination
// Next Descriptor Ptr Reg
#define IMDMA_D0_START_ADDR 0xFFC01804 // IMDMA Stream 0 Destination
// Start Address
@@ -1292,20 +1292,20 @@
// Inner-Loop Address-Increment
#define IMDMA_D0_Y_MODIFY 0xFFC0181C // IMDMA Stream 0 Dest
// Outer-Loop Address-Increment
-#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 // IMDMA Stream 0 Destination
+#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 // IMDMA Stream 0 Destination
// Current Descriptor Ptr
#define IMDMA_D0_CURR_ADDR 0xFFC01824 // IMDMA Stream 0 Destination
// Current Address
-#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 // IMDMA Stream 0 Destination
+#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 // IMDMA Stream 0 Destination
// Current Inner-Loop Count
-#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 // IMDMA Stream 0 Destination
+#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 // IMDMA Stream 0 Destination
// Current Outer-Loop Count
#define IMDMA_D0_IRQ_STATUS 0xFFC01828 // IMDMA Stream 0 Destination
// Interrupt/Status
#define IMDMA_S0_CONFIG 0xFFC01848 // IMDMA Stream 0 Source
// Configuration
-#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 // IMDMA Stream 0 Source Next
+#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 // IMDMA Stream 0 Source Next
// Descriptor Ptr Reg
#define IMDMA_S0_START_ADDR 0xFFC01844 // IMDMA Stream 0 Source Start
// Address
@@ -1330,7 +1330,7 @@
#define IMDMA_D1_CONFIG 0xFFC01888 // IMDMA Stream 1 Destination
// Configuration
-#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 // IMDMA Stream 1 Destination
+#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 // IMDMA Stream 1 Destination
// Next Descriptor Ptr Reg
#define IMDMA_D1_START_ADDR 0xFFC01884 // IMDMA Stream 1 Destination
// Start Address
@@ -1342,20 +1342,20 @@
// Inner-Loop Address-Increment
#define IMDMA_D1_Y_MODIFY 0xFFC0189C // IMDMA Stream 1 Dest
// Outer-Loop Address-Increment
-#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 // IMDMA Stream 1 Destination
+#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 // IMDMA Stream 1 Destination
// Current Descriptor Ptr
#define IMDMA_D1_CURR_ADDR 0xFFC018A4 // IMDMA Stream 1 Destination
// Current Address
-#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 // IMDMA Stream 1 Destination
+#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 // IMDMA Stream 1 Destination
// Current Inner-Loop Count
-#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 // IMDMA Stream 1 Destination
+#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 // IMDMA Stream 1 Destination
// Current Outer-Loop Count
#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 // IMDMA Stream 1 Destination
// Interrupt/Status
#define IMDMA_S1_CONFIG 0xFFC018C8 // IMDMA Stream 1 Source
// Configuration
-#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 // IMDMA Stream 1 Source Next
+#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 // IMDMA Stream 1 Source Next
// Descriptor Ptr Reg
#define IMDMA_S1_START_ADDR 0xFFC018C4 // IMDMA Stream 1 Source Start
// Address
@@ -1413,22 +1413,22 @@
// ************* SYSTEM INTERRUPT CONTROLLER MASKS *****************
-// SICu_IARv Masks
+// SICu_IARv Masks
// u = A or B
// v = 0 to 7
// w = 0 or 1
// Per_number = 0 to 63
-// IVG_number = 7 to 15
+// IVG_number = 7 to 15
// Peripheral #Per_number assigned IVG #IVG_number
-// Usage:
+// Usage:
// r0.l = lo(Peripheral_IVG(62, 10));
// r0.h = hi(Peripheral_IVG(62, 10));
#define Peripheral_IVG(Per_number, IVG_number) \
( (IVG_number) -7) << ( ((Per_number)%8) *4)
// SICx_IMASKw Masks
-// masks are 32 bit wide, so two writes reguired for "64 bit" wide registers
+// masks are 32 bit wide, so two writes reguired for "64 bit" wide registers
#define SIC_UNMASK_ALL 0x00000000 // Unmask all peripheral
// interrupts
#define SIC_MASK_ALL 0xFFFFFFFF // Mask all peripheral
@@ -1612,9 +1612,9 @@
// Relationship
#define MFD 0x0000F000 // Multichannel Frame Delay
-// ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************
+// ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************
-//// PPI_CONTROL Masks
+//// PPI_CONTROL Masks
#define PORT_EN 0x00000001 // PPI Port Enable
#define PORT_DIR 0x00000002 // PPI Port Direction
#define XFR_TYPE 0x0000000C // PPI Transfer Type
@@ -1630,7 +1630,7 @@
// x=10-->x=16)
#define POL 0x0000C000 // PPI Signal Polarities
-//// PPI_STATUS Masks
+//// PPI_STATUS Masks
#define FLD 0x00000400 // Field Indicator
#define FT_ERR 0x00000800 // Frame Track Error
#define OVR 0x00001000 // FIFO Overflow Error
@@ -1893,7 +1893,7 @@
// incoming Data
#define PSSE 0x00000010 // Enable (=1) Slave-Select
// input for Master.
-#define EMISO 0x00000020 // Enable (=1) MISO pin as an
+#define EMISO 0x00000020 // Enable (=1) MISO pin as an
// output.
#define SIZE 0x00000100 // Word length (0 => 8 bits,
// 1 => 16 bits)
@@ -1917,25 +1917,25 @@
// disable (=0)
//// SPI_FLG Masks
-#define FLS1 0x00000002 // Enables (=1) SPI_FLOUT1 as
+#define FLS1 0x00000002 // Enables (=1) SPI_FLOUT1 as
// flag output for SPI
// Slave-select
-#define FLS2 0x00000004 // Enables (=1) SPI_FLOUT2 as
+#define FLS2 0x00000004 // Enables (=1) SPI_FLOUT2 as
// flag output for SPI
// Slave-select
-#define FLS3 0x00000008 // Enables (=1) SPI_FLOUT3 as
+#define FLS3 0x00000008 // Enables (=1) SPI_FLOUT3 as
// flag output for SPI
// Slave-select
-#define FLS4 0x00000010 // Enables (=1) SPI_FLOUT4 as
+#define FLS4 0x00000010 // Enables (=1) SPI_FLOUT4 as
// flag output for SPI
// Slave-select
-#define FLS5 0x00000020 // Enables (=1) SPI_FLOUT5 as
+#define FLS5 0x00000020 // Enables (=1) SPI_FLOUT5 as
// flag output for SPI
// Slave-select
-#define FLS6 0x00000040 // Enables (=1) SPI_FLOUT6 as
+#define FLS6 0x00000040 // Enables (=1) SPI_FLOUT6 as
// flag output for SPI
// Slave-select
-#define FLS7 0x00000080 // Enables (=1) SPI_FLOUT7 as
+#define FLS7 0x00000080 // Enables (=1) SPI_FLOUT7 as
// flag output for SPI
// Slave-select
#define FLG1 0x00000200 // Activates (=0) SPI_FLOUT1
@@ -1961,25 +1961,25 @@
// Slave-select
//// SPI_FLG Bit Positions
-#define FLS1_P 0x00000001 // Enables (=1) SPI_FLOUT1 as
+#define FLS1_P 0x00000001 // Enables (=1) SPI_FLOUT1 as
// flag output for SPI
// Slave-select
-#define FLS2_P 0x00000002 // Enables (=1) SPI_FLOUT2 as
+#define FLS2_P 0x00000002 // Enables (=1) SPI_FLOUT2 as
// flag output for SPI
// Slave-select
-#define FLS3_P 0x00000003 // Enables (=1) SPI_FLOUT3 as
+#define FLS3_P 0x00000003 // Enables (=1) SPI_FLOUT3 as
// flag output for SPI
// Slave-select
-#define FLS4_P 0x00000004 // Enables (=1) SPI_FLOUT4 as
+#define FLS4_P 0x00000004 // Enables (=1) SPI_FLOUT4 as
// flag output for SPI
// Slave-select
-#define FLS5_P 0x00000005 // Enables (=1) SPI_FLOUT5 as
+#define FLS5_P 0x00000005 // Enables (=1) SPI_FLOUT5 as
// flag output for SPI
// Slave-select
-#define FLS6_P 0x00000006 // Enables (=1) SPI_FLOUT6 as
+#define FLS6_P 0x00000006 // Enables (=1) SPI_FLOUT6 as
// flag output for SPI
// Slave-select
-#define FLS7_P 0x00000007 // Enables (=1) SPI_FLOUT7 as
+#define FLS7_P 0x00000007 // Enables (=1) SPI_FLOUT7 as
// flag output for SPI
// Slave-select
#define FLG1_P 0x00000009 // Activates (=0) SPI_FLOUT1
@@ -2012,8 +2012,8 @@
// device when some other
// device tries to become
// master
-#define TXE 0x00000004 // Set (=1) when transmission
- // occurs with no new data in
+#define TXE 0x00000004 // Set (=1) when transmission
+ // occurs with no new data in
// SPI_TDBR
#define TXS 0x00000008 // SPI_TDBR Data Buffer
// Status (0=Empty, 1=Full)
@@ -2031,7 +2031,7 @@
#define AMCKEN 0x0001 // Enable CLKOUT
#define AMBEN_B0 0x0002 // Enable Asynchronous Memory Bank 0
// only
-#define AMBEN_B0_B1 0x0004 // Enable Asynchronous Memory Banks 0
+#define AMBEN_B0_B1 0x0004 // Enable Asynchronous Memory Banks 0
// & 1 only
#define AMBEN_B0_B1_B2 0x0006 // Enable Asynchronous Memory Banks 0,
// 1, and 2
@@ -2128,35 +2128,35 @@
// 14 cycles
#define B0RAT_15 0x00000F00 // Bank 0 Read Access Time =
// 15 cycles
-#define B0WAT_1 0x00001000 // Bank 0 Write Access Time =
+#define B0WAT_1 0x00001000 // Bank 0 Write Access Time =
// 1 cycle
-#define B0WAT_2 0x00002000 // Bank 0 Write Access Time =
+#define B0WAT_2 0x00002000 // Bank 0 Write Access Time =
// 2 cycles
-#define B0WAT_3 0x00003000 // Bank 0 Write Access Time =
+#define B0WAT_3 0x00003000 // Bank 0 Write Access Time =
// 3 cycles
-#define B0WAT_4 0x00004000 // Bank 0 Write Access Time =
+#define B0WAT_4 0x00004000 // Bank 0 Write Access Time =
// 4 cycles
-#define B0WAT_5 0x00005000 // Bank 0 Write Access Time =
+#define B0WAT_5 0x00005000 // Bank 0 Write Access Time =
// 5 cycles
-#define B0WAT_6 0x00006000 // Bank 0 Write Access Time =
+#define B0WAT_6 0x00006000 // Bank 0 Write Access Time =
// 6 cycles
-#define B0WAT_7 0x00007000 // Bank 0 Write Access Time =
+#define B0WAT_7 0x00007000 // Bank 0 Write Access Time =
// 7 cycles
-#define B0WAT_8 0x00008000 // Bank 0 Write Access Time =
+#define B0WAT_8 0x00008000 // Bank 0 Write Access Time =
// 8 cycles
-#define B0WAT_9 0x00009000 // Bank 0 Write Access Time =
+#define B0WAT_9 0x00009000 // Bank 0 Write Access Time =
// 9 cycles
-#define B0WAT_10 0x0000A000 // Bank 0 Write Access Time =
+#define B0WAT_10 0x0000A000 // Bank 0 Write Access Time =
// 10 cycles
-#define B0WAT_11 0x0000B000 // Bank 0 Write Access Time =
+#define B0WAT_11 0x0000B000 // Bank 0 Write Access Time =
// 11 cycles
-#define B0WAT_12 0x0000C000 // Bank 0 Write Access Time =
+#define B0WAT_12 0x0000C000 // Bank 0 Write Access Time =
// 12 cycles
-#define B0WAT_13 0x0000D000 // Bank 0 Write Access Time =
+#define B0WAT_13 0x0000D000 // Bank 0 Write Access Time =
// 13 cycles
-#define B0WAT_14 0x0000E000 // Bank 0 Write Access Time =
+#define B0WAT_14 0x0000E000 // Bank 0 Write Access Time =
// 14 cycles
-#define B0WAT_15 0x0000F000 // Bank 0 Write Access Time =
+#define B0WAT_15 0x0000F000 // Bank 0 Write Access Time =
// 15 cycles
#define B1RDYEN 0x00010000 // Bank 1 RDY enable,
// 0=disable, 1=enable
@@ -2175,29 +2175,29 @@
#define B1TT_4 0x00000000 // Bank 1 Transition Time
// from Read to Write = 4
// cycles
-#define B1ST_1 0x00100000 // Bank 1 Setup Time from AOE
+#define B1ST_1 0x00100000 // Bank 1 Setup Time from AOE
// asserted to Read or Write
// asserted = 1 cycle
-#define B1ST_2 0x00200000 // Bank 1 Setup Time from AOE
+#define B1ST_2 0x00200000 // Bank 1 Setup Time from AOE
// asserted to Read or Write
// asserted = 2 cycles
-#define B1ST_3 0x00300000 // Bank 1 Setup Time from AOE
+#define B1ST_3 0x00300000 // Bank 1 Setup Time from AOE
// asserted to Read or Write
// asserted = 3 cycles
-#define B1ST_4 0x00000000 // Bank 1 Setup Time from AOE
+#define B1ST_4 0x00000000 // Bank 1 Setup Time from AOE
// asserted to Read or Write
// asserted = 4 cycles
-#define B1HT_1 0x00400000 // Bank 1 Hold Time from Read
- // or Write deasserted to AOE
+#define B1HT_1 0x00400000 // Bank 1 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 1 cycle
-#define B1HT_2 0x00800000 // Bank 1 Hold Time from Read
- // or Write deasserted to AOE
+#define B1HT_2 0x00800000 // Bank 1 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 2 cycles
-#define B1HT_3 0x00C00000 // Bank 1 Hold Time from Read
- // or Write deasserted to AOE
+#define B1HT_3 0x00C00000 // Bank 1 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 3 cycles
-#define B1HT_0 0x00000000 // Bank 1 Hold Time from Read
- // or Write deasserted to AOE
+#define B1HT_0 0x00000000 // Bank 1 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 0 cycles
#define B1RAT_1 0x01000000 // Bank 1 Read Access Time =
// 1 cycle
@@ -2229,35 +2229,35 @@
// 14 cycles
#define B1RAT_15 0x0F000000 // Bank 1 Read Access Time =
// 15 cycles
-#define B1WAT_1 0x10000000 // Bank 1 Write Access Time =
+#define B1WAT_1 0x10000000 // Bank 1 Write Access Time =
// 1 cycle
-#define B1WAT_2 0x20000000 // Bank 1 Write Access Time =
+#define B1WAT_2 0x20000000 // Bank 1 Write Access Time =
// 2 cycles
-#define B1WAT_3 0x30000000 // Bank 1 Write Access Time =
+#define B1WAT_3 0x30000000 // Bank 1 Write Access Time =
// 3 cycles
-#define B1WAT_4 0x40000000 // Bank 1 Write Access Time =
+#define B1WAT_4 0x40000000 // Bank 1 Write Access Time =
// 4 cycles
-#define B1WAT_5 0x50000000 // Bank 1 Write Access Time =
+#define B1WAT_5 0x50000000 // Bank 1 Write Access Time =
// 5 cycles
-#define B1WAT_6 0x60000000 // Bank 1 Write Access Time =
+#define B1WAT_6 0x60000000 // Bank 1 Write Access Time =
// 6 cycles
-#define B1WAT_7 0x70000000 // Bank 1 Write Access Time =
+#define B1WAT_7 0x70000000 // Bank 1 Write Access Time =
// 7 cycles
-#define B1WAT_8 0x80000000 // Bank 1 Write Access Time =
+#define B1WAT_8 0x80000000 // Bank 1 Write Access Time =
// 8 cycles
-#define B1WAT_9 0x90000000 // Bank 1 Write Access Time =
+#define B1WAT_9 0x90000000 // Bank 1 Write Access Time =
// 9 cycles
-#define B1WAT_10 0xA0000000 // Bank 1 Write Access Time =
+#define B1WAT_10 0xA0000000 // Bank 1 Write Access Time =
// 10 cycles
-#define B1WAT_11 0xB0000000 // Bank 1 Write Access Time =
+#define B1WAT_11 0xB0000000 // Bank 1 Write Access Time =
// 11 cycles
-#define B1WAT_12 0xC0000000 // Bank 1 Write Access Time =
+#define B1WAT_12 0xC0000000 // Bank 1 Write Access Time =
// 12 cycles
-#define B1WAT_13 0xD0000000 // Bank 1 Write Access Time =
+#define B1WAT_13 0xD0000000 // Bank 1 Write Access Time =
// 13 cycles
-#define B1WAT_14 0xE0000000 // Bank 1 Write Access Time =
+#define B1WAT_14 0xE0000000 // Bank 1 Write Access Time =
// 14 cycles
-#define B1WAT_15 0xF0000000 // Bank 1 Write Access Time =
+#define B1WAT_15 0xF0000000 // Bank 1 Write Access Time =
// 15 cycles
// AMBCTL1 Masks
@@ -2278,29 +2278,29 @@
#define B2TT_4 0x00000000 // Bank 2 Transition Time
// from Read to Write = 4
// cycles
-#define B2ST_1 0x00000010 // Bank 2 Setup Time from AOE
+#define B2ST_1 0x00000010 // Bank 2 Setup Time from AOE
// asserted to Read or Write
// asserted = 1 cycle
-#define B2ST_2 0x00000020 // Bank 2 Setup Time from AOE
+#define B2ST_2 0x00000020 // Bank 2 Setup Time from AOE
// asserted to Read or Write
// asserted = 2 cycles
-#define B2ST_3 0x00000030 // Bank 2 Setup Time from AOE
+#define B2ST_3 0x00000030 // Bank 2 Setup Time from AOE
// asserted to Read or Write
// asserted = 3 cycles
-#define B2ST_4 0x00000000 // Bank 2 Setup Time from AOE
+#define B2ST_4 0x00000000 // Bank 2 Setup Time from AOE
// asserted to Read or Write
// asserted = 4 cycles
-#define B2HT_1 0x00000040 // Bank 2 Hold Time from Read
- // or Write deasserted to AOE
+#define B2HT_1 0x00000040 // Bank 2 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 1 cycle
-#define B2HT_2 0x00000080 // Bank 2 Hold Time from Read
- // or Write deasserted to AOE
+#define B2HT_2 0x00000080 // Bank 2 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 2 cycles
-#define B2HT_3 0x000000C0 // Bank 2 Hold Time from Read
- // or Write deasserted to AOE
+#define B2HT_3 0x000000C0 // Bank 2 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 3 cycles
-#define B2HT_0 0x00000000 // Bank 2 Hold Time from Read
- // or Write deasserted to AOE
+#define B2HT_0 0x00000000 // Bank 2 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 0 cycles
#define B2RAT_1 0x00000100 // Bank 2 Read Access Time =
// 1 cycle
@@ -2332,35 +2332,35 @@
// 14 cycles
#define B2RAT_15 0x00000F00 // Bank 2 Read Access Time =
// 15 cycles
-#define B2WAT_1 0x00001000 // Bank 2 Write Access Time =
+#define B2WAT_1 0x00001000 // Bank 2 Write Access Time =
// 1 cycle
-#define B2WAT_2 0x00002000 // Bank 2 Write Access Time =
+#define B2WAT_2 0x00002000 // Bank 2 Write Access Time =
// 2 cycles
-#define B2WAT_3 0x00003000 // Bank 2 Write Access Time =
+#define B2WAT_3 0x00003000 // Bank 2 Write Access Time =
// 3 cycles
-#define B2WAT_4 0x00004000 // Bank 2 Write Access Time =
+#define B2WAT_4 0x00004000 // Bank 2 Write Access Time =
// 4 cycles
-#define B2WAT_5 0x00005000 // Bank 2 Write Access Time =
+#define B2WAT_5 0x00005000 // Bank 2 Write Access Time =
// 5 cycles
-#define B2WAT_6 0x00006000 // Bank 2 Write Access Time =
+#define B2WAT_6 0x00006000 // Bank 2 Write Access Time =
// 6 cycles
-#define B2WAT_7 0x00007000 // Bank 2 Write Access Time =
+#define B2WAT_7 0x00007000 // Bank 2 Write Access Time =
// 7 cycles
-#define B2WAT_8 0x00008000 // Bank 2 Write Access Time =
+#define B2WAT_8 0x00008000 // Bank 2 Write Access Time =
// 8 cycles
-#define B2WAT_9 0x00009000 // Bank 2 Write Access Time =
+#define B2WAT_9 0x00009000 // Bank 2 Write Access Time =
// 9 cycles
-#define B2WAT_10 0x0000A000 // Bank 2 Write Access Time =
+#define B2WAT_10 0x0000A000 // Bank 2 Write Access Time =
// 10 cycles
-#define B2WAT_11 0x0000B000 // Bank 2 Write Access Time =
+#define B2WAT_11 0x0000B000 // Bank 2 Write Access Time =
// 11 cycles
-#define B2WAT_12 0x0000C000 // Bank 2 Write Access Time =
+#define B2WAT_12 0x0000C000 // Bank 2 Write Access Time =
// 12 cycles
-#define B2WAT_13 0x0000D000 // Bank 2 Write Access Time =
+#define B2WAT_13 0x0000D000 // Bank 2 Write Access Time =
// 13 cycles
-#define B2WAT_14 0x0000E000 // Bank 2 Write Access Time =
+#define B2WAT_14 0x0000E000 // Bank 2 Write Access Time =
// 14 cycles
-#define B2WAT_15 0x0000F000 // Bank 2 Write Access Time =
+#define B2WAT_15 0x0000F000 // Bank 2 Write Access Time =
// 15 cycles
#define B3RDYEN 0x00010000 // Bank 3 RDY enable,
// 0=disable, 1=enable
@@ -2379,29 +2379,29 @@
#define B3TT_4 0x00000000 // Bank 3 Transition Time
// from Read to Write = 4
// cycles
-#define B3ST_1 0x00100000 // Bank 3 Setup Time from AOE
+#define B3ST_1 0x00100000 // Bank 3 Setup Time from AOE
// asserted to Read or Write
// asserted = 1 cycle
-#define B3ST_2 0x00200000 // Bank 3 Setup Time from AOE
+#define B3ST_2 0x00200000 // Bank 3 Setup Time from AOE
// asserted to Read or Write
// asserted = 2 cycles
-#define B3ST_3 0x00300000 // Bank 3 Setup Time from AOE
+#define B3ST_3 0x00300000 // Bank 3 Setup Time from AOE
// asserted to Read or Write
// asserted = 3 cycles
-#define B3ST_4 0x00000000 // Bank 3 Setup Time from AOE
+#define B3ST_4 0x00000000 // Bank 3 Setup Time from AOE
// asserted to Read or Write
// asserted = 4 cycles
-#define B3HT_1 0x00400000 // Bank 3 Hold Time from Read
- // or Write deasserted to AOE
+#define B3HT_1 0x00400000 // Bank 3 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 1 cycle
-#define B3HT_2 0x00800000 // Bank 3 Hold Time from Read
- // or Write deasserted to AOE
+#define B3HT_2 0x00800000 // Bank 3 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 2 cycles
-#define B3HT_3 0x00C00000 // Bank 3 Hold Time from Read
- // or Write deasserted to AOE
+#define B3HT_3 0x00C00000 // Bank 3 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 3 cycles
-#define B3HT_0 0x00000000 // Bank 3 Hold Time from Read
- // or Write deasserted to AOE
+#define B3HT_0 0x00000000 // Bank 3 Hold Time from Read
+ // or Write deasserted to AOE
// deasserted = 0 cycles
#define B3RAT_1 0x01000000 // Bank 3 Read Access Time =
// 1 cycle
@@ -2433,35 +2433,35 @@
// 14 cycles
#define B3RAT_15 0x0F000000 // Bank 3 Read Access Time =
// 15 cycles
-#define B3WAT_1 0x10000000 // Bank 3 Write Access Time =
+#define B3WAT_1 0x10000000 // Bank 3 Write Access Time =
// 1 cycle
-#define B3WAT_2 0x20000000 // Bank 3 Write Access Time =
+#define B3WAT_2 0x20000000 // Bank 3 Write Access Time =
// 2 cycles
-#define B3WAT_3 0x30000000 // Bank 3 Write Access Time =
+#define B3WAT_3 0x30000000 // Bank 3 Write Access Time =
// 3 cycles
-#define B3WAT_4 0x40000000 // Bank 3 Write Access Time =
+#define B3WAT_4 0x40000000 // Bank 3 Write Access Time =
// 4 cycles
-#define B3WAT_5 0x50000000 // Bank 3 Write Access Time =
+#define B3WAT_5 0x50000000 // Bank 3 Write Access Time =
// 5 cycles
-#define B3WAT_6 0x60000000 // Bank 3 Write Access Time =
+#define B3WAT_6 0x60000000 // Bank 3 Write Access Time =
// 6 cycles
-#define B3WAT_7 0x70000000 // Bank 3 Write Access Time =
+#define B3WAT_7 0x70000000 // Bank 3 Write Access Time =
// 7 cycles
-#define B3WAT_8 0x80000000 // Bank 3 Write Access Time =
+#define B3WAT_8 0x80000000 // Bank 3 Write Access Time =
// 8 cycles
-#define B3WAT_9 0x90000000 // Bank 3 Write Access Time =
+#define B3WAT_9 0x90000000 // Bank 3 Write Access Time =
// 9 cycles
-#define B3WAT_10 0xA0000000 // Bank 3 Write Access Time =
+#define B3WAT_10 0xA0000000 // Bank 3 Write Access Time =
// 10 cycles
-#define B3WAT_11 0xB0000000 // Bank 3 Write Access Time =
+#define B3WAT_11 0xB0000000 // Bank 3 Write Access Time =
// 11 cycles
-#define B3WAT_12 0xC0000000 // Bank 3 Write Access Time =
+#define B3WAT_12 0xC0000000 // Bank 3 Write Access Time =
// 12 cycles
-#define B3WAT_13 0xD0000000 // Bank 3 Write Access Time =
+#define B3WAT_13 0xD0000000 // Bank 3 Write Access Time =
// 13 cycles
-#define B3WAT_14 0xE0000000 // Bank 3 Write Access Time =
+#define B3WAT_14 0xE0000000 // Bank 3 Write Access Time =
// 14 cycles
-#define B3WAT_15 0xF0000000 // Bank 3 Write Access Time =
+#define B3WAT_15 0xF0000000 // Bank 3 Write Access Time =
// 15 cycles
// ********************** SDRAM CONTROLLER MASKS ***************************
@@ -2474,7 +2474,7 @@
#define CL_3 0x0000000C // SDRAM CAS latency = 3
// cycles
#define PFE 0x00000010 // Enable SDRAM prefetch
-#define PFP 0x00000020 // Prefetch has priority over
+#define PFP 0x00000020 // Prefetch has priority over
// AMC requests
#define TRAS_1 0x00000040 // SDRAM tRAS = 1 cycle
#define TRAS_2 0x00000080 // SDRAM tRAS = 2 cycles
@@ -2646,9 +2646,9 @@
// register
#define FIO_DIR 0xFFC00730 // Flag Direction register
#define FIO_POLAR 0xFFC00734 // Flag Polarity register
-#define FIO_EDGE 0xFFC00738 // Flag Interrupt Sensitivity
+#define FIO_EDGE 0xFFC00738 // Flag Interrupt Sensitivity
// register
-#define FIO_BOTH 0xFFC0073C // Flag Set on Both Edges
+#define FIO_BOTH 0xFFC0073C // Flag Set on Both Edges
// register
#define FIO_INEN 0xFFC00740 // Flag Input Enable register
@@ -2662,12 +2662,12 @@
// System Reset and Interrupt Controller registers for
// core A (0xFFC0 0100-0xFFC0 01FF)
#define SWRST 0xFFC00100 // Software Reset register
-#define SYSCR 0xFFC00104 // System Reset Configuration
+#define SYSCR 0xFFC00104 // System Reset Configuration
// register
#define RVECT 0xFFC00108 // SIC Reset Vector Address
// Register
#define SIC_SWRST 0xFFC00100 // Software Reset register
-#define SIC_SYSCR 0xFFC00104 // System Reset Configuration
+#define SIC_SYSCR 0xFFC00104 // System Reset Configuration
// register
#define SIC_RVECT 0xFFC00108 // SIC Reset Vector Address
// Register
@@ -2851,7 +2851,7 @@
// Addr Increment
#define DMA0_CURR_DESC_PTR 0xFFC01C20 // DMA1 Channel 0 Current
// Descriptor Pointer
-#define DMA0_CURR_ADDR 0xFFC01C24 // DMA1 Channel 0 Current
+#define DMA0_CURR_ADDR 0xFFC01C24 // DMA1 Channel 0 Current
// Address Pointer
#define DMA0_CURR_X_COUNT 0xFFC01C30 // DMA1 Channel 0 Current Inner
// Loop Count
diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S
index 357b632..def52cb 100644
--- a/arch/blackfin/lib/udivsi3.S
+++ b/arch/blackfin/lib/udivsi3.S
@@ -106,7 +106,7 @@ ___udivsi3:
** with some post-adjustment
*/
R3 = R1 >> 1; /* Pre-scaled divisor for primitive case */
- R2 = R0 >> 16;
+ R2 = R0 >> 16;
R2 = R3 - R2; /* shifted divisor < upper 16 bits of dividend */
CC &= CARRY;
diff --git a/arch/nios2/lib/longlong.h b/arch/nios2/lib/longlong.h
index 1271682..58b29d8 100644
--- a/arch/nios2/lib/longlong.h
+++ b/arch/nios2/lib/longlong.h
@@ -1,7 +1,7 @@
/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
* Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2004,
* 2005 Free Software Foundation, Inc.
- *
+ *
* This definition file is free software; you can redistribute it
* and/or modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation; either
diff --git a/arch/ppc/include/asm/elf.h b/arch/ppc/include/asm/elf.h
index 2fb48ec..bb8762b 100644
--- a/arch/ppc/include/asm/elf.h
+++ b/arch/ppc/include/asm/elf.h
@@ -129,18 +129,18 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
/* Altivec registers */
/*
- * The entries with indexes 0-31 contain the corresponding vector registers.
- * The entry with index 32 contains the vscr as the last word (offset 12)
- * within the quadword. This allows the vscr to be stored as either a
- * quadword (since it must be copied via a vector register to/from storage)
- * or as a word.
+ * The entries with indexes 0-31 contain the corresponding vector registers.
+ * The entry with index 32 contains the vscr as the last word (offset 12)
+ * within the quadword. This allows the vscr to be stored as either a
+ * quadword (since it must be copied via a vector register to/from storage)
+ * or as a word.
*
- * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first
+ * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first
* word (offset 0) within the quadword.
*
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface. This allows signal handling and ptrace to use the same
- * structures. This also simplifies the implementation of a bi-arch
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface. This allows signal handling and ptrace to use the same
+ * structures. This also simplifies the implementation of a bi-arch
* (combined (32- and 64-bit) gdb.
*
* Note that it's _not_ compatible with 32 bits ucontext which stuffs the
@@ -243,7 +243,7 @@ do { \
*/
# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
(exec_stk != EXSTACK_DISABLE_X) : 0)
-#else
+#else
# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
#endif /* __powerpc64__ */
diff --git a/common/module.c b/common/module.c
index eb882bc..829c120 100644
--- a/common/module.c
+++ b/common/module.c
@@ -60,7 +60,7 @@ static const struct kernel_symbol *lookup_symbol(const char *name,
return NULL;
}
-static unsigned long resolve_symbol(Elf32_Shdr *sechdrs,
+static unsigned long resolve_symbol(Elf32_Shdr *sechdrs,
const char *name)
{
const struct kernel_symbol *ks;
diff --git a/common/tlsf.c b/common/tlsf.c
index 984342e..ba68a5e 100644
--- a/common/tlsf.c
+++ b/common/tlsf.c
@@ -151,7 +151,7 @@ static const size_t block_start_offset =
** the prev_phys_block field, and no larger than the number of addressable
** bits for FL_INDEX.
*/
-static const size_t block_size_min =
+static const size_t block_size_min =
sizeof(block_header_t) - sizeof(block_header_t*);
static const size_t block_size_max = tlsf_cast(size_t, 1) << FL_INDEX_MAX;
@@ -770,7 +770,7 @@ tlsf_pool tlsf_create(void* mem, size_t bytes)
#if defined (TLSF_64BIT)
rv += (tlsf_fls_sizet(0x80000000) == 31) ? 0 : 0x100;
rv += (tlsf_fls_sizet(0x100000000) == 32) ? 0 : 0x200;
- rv += (tlsf_fls_sizet(0xffffffffffffffff) == 63) ? 0 : 0x400;
+ rv += (tlsf_fls_sizet(0xffffffffffffffff) == 63) ? 0 : 0x400;
if (rv)
{
printf("tlsf_create: %x ffs/fls tests failed!\n", rv);
@@ -785,7 +785,7 @@ tlsf_pool tlsf_create(void* mem, size_t bytes)
printf("tlsf_create: Pool size must be at least %d bytes.\n",
(unsigned int)(pool_overhead + block_size_min));
#else
- printf("tlsf_create: Pool size must be between %u and %u bytes.\n",
+ printf("tlsf_create: Pool size must be between %u and %u bytes.\n",
(unsigned int)(pool_overhead + block_size_min),
(unsigned int)(pool_overhead + block_size_max));
#endif
diff --git a/crypto/digest.c b/crypto/digest.c
index 46600f2..7a8c3c0 100644
--- a/crypto/digest.c
+++ b/crypto/digest.c
@@ -77,7 +77,7 @@ int digest_generic_digest(struct digest *d, const void *data,
int digest_algo_register(struct digest_algo *d)
{
- if (!d || !d->base.name || !d->update || !d->final || !d->verify)
+ if (!d || !d->base.name || !d->update || !d->final || !d->verify)
return -EINVAL;
if (!d->init)
diff --git a/crypto/sha2.c b/crypto/sha2.c
index df566c8..cb0f11c 100644
--- a/crypto/sha2.c
+++ b/crypto/sha2.c
@@ -13,7 +13,7 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
+ * Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c
index 1e67c7a..316b971 100644
--- a/drivers/net/altera_tse.c
+++ b/drivers/net/altera_tse.c
@@ -533,7 +533,7 @@ static int tse_probe(struct device_d *dev)
}
#endif
- memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
+ memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
memset(tx_desc, 0, (sizeof *tx_desc) * 2);
iores = dev_request_mem_resource(dev, 0);
diff --git a/drivers/net/fec_imx.h b/drivers/net/fec_imx.h
index 0921b52..1947e60 100644
--- a/drivers/net/fec_imx.h
+++ b/drivers/net/fec_imx.h
@@ -193,7 +193,7 @@ static inline int fec_is_imx6(struct fec_priv *priv)
#define FEC_RBD_SH 0x0008 /**< Receive BD status: Short frame */
#define FEC_RBD_CR 0x0004 /**< Receive BD status: CRC error */
#define FEC_RBD_OV 0x0002 /**< Receive BD status: Receive FIFO overrun */
-#define FEC_RBD_TR 0x0001 /**< Receive BD status: Frame is truncated */
+#define FEC_RBD_TR 0x0001 /**< Receive BD status: Frame is truncated */
#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
FEC_RBD_OV | FEC_RBD_TR)
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 8540a84..3bf2af9 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -186,7 +186,7 @@
#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */
#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */
-#define RX_FIFO_INF 0x7C
+#define RX_FIFO_INF 0x7C
#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */
#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */
diff --git a/drivers/spi/imx_spi.c b/drivers/spi/imx_spi.c
index 5bd1845..99ec228 100644
--- a/drivers/spi/imx_spi.c
+++ b/drivers/spi/imx_spi.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
diff --git a/fs/cramfs/cramfs.c b/fs/cramfs/cramfs.c
index 988fa7e..a02c253 100644
--- a/fs/cramfs/cramfs.c
+++ b/fs/cramfs/cramfs.c
@@ -306,7 +306,7 @@ static int cramfs_close(struct device_d *dev, FILE *file)
free(inodei->block_ptrs);
free(inodei);
-
+
return 0;
}
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 0017a4a..ce6e95e 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2413,7 +2413,7 @@ retry:
goto retry;
#endif
}
-
+
err = set(s, data);
if (err) {
#ifndef __BAREBOX__
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 75e54e7..1c0f46a 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -423,7 +423,7 @@ struct super_block {
struct file_system_type {
const char *name;
int fs_flags;
-#define FS_REQUIRES_DEV 1
+#define FS_REQUIRES_DEV 1
#define FS_BINARY_MOUNTDATA 2
#define FS_HAS_SUBTYPE 4
#define FS_USERNS_MOUNT 8 /* Can be mounted by userns root */
diff --git a/include/elf.h b/include/elf.h
index 6d4addf..a749bec 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -284,7 +284,7 @@ typedef struct elf64_phdr {
#define SHN_ABS 0xfff1
#define SHN_COMMON 0xfff2
#define SHN_HIRESERVE 0xffff
-
+
typedef struct {
Elf32_Word sh_name;
Elf32_Word sh_type;
diff --git a/include/fb.h b/include/fb.h
index cf113c4..b2a9c71 100644
--- a/include/fb.h
+++ b/include/fb.h
@@ -73,8 +73,8 @@ struct fb_videomode {
struct fb_bitfield {
u32 offset; /* beginning of bitfield */
u32 length; /* length of bitfield */
- u32 msb_right; /* != 0 : Most significant bit is */
- /* right */
+ u32 msb_right; /* != 0 : Most significant bit is */
+ /* right */
};
struct fb_info;
diff --git a/include/linux/mount.h b/include/linux/mount.h
index e4d185c..57d5ba9 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -1,6 +1,6 @@
/*
*
- * Definitions for mount interface. This describes the in the kernel build
+ * Definitions for mount interface. This describes the in the kernel build
* linkedlist with mounted filesystems.
*
* Author: Marco van Wieringen <mvw@planets.elm.net>
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index d85b0ad..a5ef1b9 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -1,7 +1,7 @@
/*
Red Black Trees
(C) 1999 Andrea Arcangeli <andrea@suse.de>
-
+
* SPDX-License-Identifier: GPL-2.0+
linux/include/linux/rbtree.h
@@ -61,7 +61,7 @@ extern struct rb_node *rb_first_postorder(const struct rb_root *);
extern struct rb_node *rb_next_postorder(const struct rb_node *);
/* Fast replacement of a single node without remove/rebalance/add/rebalance */
-extern void rb_replace_node(struct rb_node *victim, struct rb_node *new,
+extern void rb_replace_node(struct rb_node *victim, struct rb_node *new,
struct rb_root *root);
static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
diff --git a/lib/glob.c b/lib/glob.c
index 1b0137b..5a997ca 100644
--- a/lib/glob.c
+++ b/lib/glob.c
@@ -428,7 +428,7 @@ glob_t *pglob;
elems = pglob->gl_pathc + 2;
if (flags & GLOB_DOOFFS)
elems += pglob->gl_offs;
-
+
pglob->gl_pathv = xrealloc(pglob->gl_pathv, elems * sizeof(char *));
if (flags & GLOB_DOOFFS)
diff --git a/lib/rbtree.c b/lib/rbtree.c
index 7297792..6fba2c5 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -444,7 +444,7 @@ struct rb_node *rb_next(const struct rb_node *node)
* as we can.
*/
if (node->rb_right) {
- node = node->rb_right;
+ node = node->rb_right;
while (node->rb_left)
node=node->rb_left;
return (struct rb_node *)node;
@@ -476,7 +476,7 @@ struct rb_node *rb_prev(const struct rb_node *node)
* as we can.
*/
if (node->rb_left) {
- node = node->rb_left;
+ node = node->rb_left;
while (node->rb_right)
node=node->rb_right;
return (struct rb_node *)node;
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] whole tree: remove trail space
2016-04-21 11:30 [PATCH] whole tree: remove trail space DU HUANPENG
@ 2016-04-21 13:22 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2016-04-21 13:22 UTC (permalink / raw)
To: DU HUANPENG; +Cc: barebox, Du Huanpeng
On Thu, Apr 21, 2016 at 07:30:28PM +0800, DU HUANPENG wrote:
> From: Du Huanpeng <u74147@gmail.com>
>
> Signed-off-by: Du Huanpeng <u74147@gmail.com>
> ---
> arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 2 +-
> arch/arm/boards/freescale-mx21-ads/imx21ads.c | 4 +-
> arch/arm/boards/freescale-mx23-evk/mx23-evk.c | 2 +-
> arch/arm/boards/freescale-mx27-ads/imx27ads.c | 2 +-
> arch/arm/boards/phytec-phycard-imx27/pca100.c | 2 +-
> arch/arm/boards/phytec-phycore-imx27/pcm038.c | 2 +-
> arch/arm/include/asm/elf.h | 4 +-
> arch/arm/mach-netx/clocksource.c | 2 +-
> arch/arm/mach-socfpga/include/mach/sequencer.c | 438 +++++++++++-----------
> arch/blackfin/cpu-bf561/start.S | 14 +-
> arch/blackfin/include/asm/cpu/cdefBF561.h | 4 +-
> arch/blackfin/include/asm/cpu/defBF561.h | 332 ++++++++--------
> arch/blackfin/lib/udivsi3.S | 2 +-
> arch/nios2/lib/longlong.h | 2 +-
> arch/ppc/include/asm/elf.h | 20 +-
> common/module.c | 2 +-
> common/tlsf.c | 6 +-
> crypto/digest.c | 2 +-
> crypto/sha2.c | 2 +-
> drivers/net/altera_tse.c | 2 +-
> drivers/net/fec_imx.h | 2 +-
> drivers/net/smc911x.h | 2 +-
> drivers/spi/imx_spi.c | 2 +-
> fs/cramfs/cramfs.c | 2 +-
> fs/ubifs/super.c | 2 +-
> fs/ubifs/ubifs.h | 2 +-
> include/elf.h | 2 +-
> include/fb.h | 4 +-
> include/linux/mount.h | 2 +-
> include/linux/rbtree.h | 4 +-
> lib/glob.c | 2 +-
> lib/rbtree.c | 4 +-
> 32 files changed, 438 insertions(+), 438 deletions(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-04-21 13:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-21 11:30 [PATCH] whole tree: remove trail space DU HUANPENG
2016-04-21 13:22 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox