mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Shiyan <shc_work@mail.ru>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] net: smc911x: Add parsing devicetree options
Date: Mon, 4 Jul 2016 09:35:35 +0200	[thread overview]
Message-ID: <20160704073535.GF20657@pengutronix.de> (raw)
In-Reply-To: <1467435587-20533-1-git-send-email-shc_work@mail.ru>

On Sat, Jul 02, 2016 at 07:59:47AM +0300, Alexander Shiyan wrote:
> This patch adds parsing basic devicetree options for the smc911x driver:
> reg-io-width, reg-shift and smsc,force-(in/ex)ternal-phy, which makes
> driver usable for most DTS-based boards.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
>  drivers/net/smc911x.c               | 17 +++++++++++++++--
>  include/platform_data/eth-smc911x.h |  2 +-
>  2 files changed, 16 insertions(+), 3 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
> index fe9d1df..45175bb 100644
> --- a/drivers/net/smc911x.c
> +++ b/drivers/net/smc911x.c
> @@ -38,7 +38,7 @@ struct smc911x_priv {
>  	struct mii_bus miibus;
>  	void __iomem *base;
>  
> -	int shift;
> +	u32 shift;
>  	int generation;
>  	unsigned int flags;
>  	unsigned int idrev;
> @@ -516,6 +516,19 @@ static int smc911x_probe(struct device_d *dev)
>  		priv->shift = pdata->shift;
>  		priv->flags = pdata->flags;
>  		priv->phy_mask = pdata->phy_mask;
> +	} else if (IS_ENABLED(CONFIG_OFDEVICE) && dev->device_node) {
> +		ret = of_property_read_u32(dev->device_node, "reg-io-width", &val);
> +		if (ret)
> +			return ret;
> +		is_32bit = (val == 4);
> +
> +		of_property_read_u32(dev->device_node, "reg-shift", &priv->shift);
> +
> +		if (of_property_read_bool(dev->device_node, "smsc,force-internal-phy"))
> +			priv->flags |= SMC911X_FORCE_INTERNAL_PHY;
> +
> +		if (of_property_read_bool(dev->device_node, "smsc,force-external-phy"))
> +			priv->flags |= SMC911X_FORCE_EXTERNAL_PHY;
>  	}
>  
>  	if (is_32bit) {
> @@ -562,7 +575,7 @@ static int smc911x_probe(struct device_d *dev)
>  	if (val != 0x87654321) {
>  		dev_err(dev, "no smc911x found on 0x%p (byte_test=0x%08x)\n",
>  			priv->base, val);
> -		if (((val >> 16) & 0xFFFF) == (val & 0xFFFF)) {
> +		if ((((val >> 16) & 0xFFFF) == (val & 0xFFFF)) && is_32bit) {
>  			/*
>  			 * This may mean the chip is set
>  			 * for 32 bit while the bus is reading 16 bit
> diff --git a/include/platform_data/eth-smc911x.h b/include/platform_data/eth-smc911x.h
> index 4a802ee..c97a296 100644
> --- a/include/platform_data/eth-smc911x.h
> +++ b/include/platform_data/eth-smc911x.h
> @@ -12,7 +12,7 @@
>   * Pass pointer to this structure as part of device_d -> platform_data
>   */
>  struct smc911x_plat {
> -	int shift;
> +	u32 shift;
>  	unsigned int flags;
>  	unsigned int phy_mask;	/* external PHY only: mask out PHYs,
>  				   e.g. ~(1 << 5) to use PHY addr 5 */
> -- 
> 2.4.9
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2016-07-04  7:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-02  4:59 Alexander Shiyan
2016-07-04  7:35 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160704073535.GF20657@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=shc_work@mail.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox