* [PATCH] ARM: imx_defconfig: enable NAND_IMX_BBM and NAND_ALLOW_ERASE_BAD
@ 2016-07-08 7:35 Uwe Kleine-König
2016-07-11 5:49 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Uwe Kleine-König @ 2016-07-08 7:35 UTC (permalink / raw)
To: barebox
The first is important for imx systems with NAND. The second is a useful
debug aid that doesn't change behaviour without being explicitly enabled
at runtime. So both should be safe.
The other changes result from MFD_MC13XXX and SPI_IMX being selected by
MACH_PCM038 since 4bd07a103982 ("arm: imx: select MFD_MC13XXX for all
boards that need it") and a move of a few Kconfig definitions in
7839011f61c0 ("bootm: Move bootm options to common/Kconfig").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
arch/arm/configs/imx_defconfig | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/configs/imx_defconfig b/arch/arm/configs/imx_defconfig
index 886bcefd9b68..69ab021e25ae 100644
--- a/arch/arm/configs/imx_defconfig
+++ b/arch/arm/configs/imx_defconfig
@@ -19,6 +19,10 @@ CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
CONFIG_BLSPEC=y
CONFIG_CONSOLE_ACTIVATE_NONE=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
@@ -26,10 +30,6 @@ CONFIG_RESET_SOURCE=y
CONFIG_LONGHELP=y
CONFIG_CMD_IOMEM=y
CONFIG_CMD_MEMINFO=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_GO=y
CONFIG_CMD_RESET=y
@@ -79,7 +79,6 @@ CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_NET_USB=y
CONFIG_NET_USB_ASIX=y
-CONFIG_DRIVER_SPI_IMX=y
CONFIG_I2C=y
CONFIG_I2C_IMX=y
CONFIG_MTD=y
@@ -89,7 +88,9 @@ CONFIG_CFI_BUFFER_WRITE=y
CONFIG_NAND=y
# CONFIG_NAND_ECC_SOFT is not set
# CONFIG_NAND_ECC_HW_SYNDROME is not set
+CONFIG_NAND_ALLOW_ERASE_BAD=y
CONFIG_NAND_IMX=y
+CONFIG_NAND_IMX_BBM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_USB_HOST=y
@@ -97,7 +98,6 @@ CONFIG_USB_EHCI=y
CONFIG_USB_ULPI=y
CONFIG_MCI=y
CONFIG_MCI_IMX=y
-CONFIG_MFD_MC13XXX=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
--
2.8.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: imx_defconfig: enable NAND_IMX_BBM and NAND_ALLOW_ERASE_BAD
2016-07-08 7:35 [PATCH] ARM: imx_defconfig: enable NAND_IMX_BBM and NAND_ALLOW_ERASE_BAD Uwe Kleine-König
@ 2016-07-11 5:49 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2016-07-11 5:49 UTC (permalink / raw)
To: Uwe Kleine-König; +Cc: barebox
On Fri, Jul 08, 2016 at 09:35:48AM +0200, Uwe Kleine-König wrote:
> The first is important for imx systems with NAND. The second is a useful
> debug aid that doesn't change behaviour without being explicitly enabled
> at runtime. So both should be safe.
>
> The other changes result from MFD_MC13XXX and SPI_IMX being selected by
> MACH_PCM038 since 4bd07a103982 ("arm: imx: select MFD_MC13XXX for all
> boards that need it") and a move of a few Kconfig definitions in
> 7839011f61c0 ("bootm: Move bootm options to common/Kconfig").
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> arch/arm/configs/imx_defconfig | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/configs/imx_defconfig b/arch/arm/configs/imx_defconfig
> index 886bcefd9b68..69ab021e25ae 100644
> --- a/arch/arm/configs/imx_defconfig
> +++ b/arch/arm/configs/imx_defconfig
> @@ -19,6 +19,10 @@ CONFIG_HUSH_FANCY_PROMPT=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_MENU=y
> +CONFIG_BOOTM_SHOW_TYPE=y
> +CONFIG_BOOTM_VERBOSE=y
> +CONFIG_BOOTM_INITRD=y
> +CONFIG_BOOTM_OFTREE=y
> CONFIG_BLSPEC=y
> CONFIG_CONSOLE_ACTIVATE_NONE=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> @@ -26,10 +30,6 @@ CONFIG_RESET_SOURCE=y
> CONFIG_LONGHELP=y
> CONFIG_CMD_IOMEM=y
> CONFIG_CMD_MEMINFO=y
> -CONFIG_BOOTM_SHOW_TYPE=y
> -CONFIG_BOOTM_VERBOSE=y
> -CONFIG_BOOTM_INITRD=y
> -CONFIG_BOOTM_OFTREE=y
> # CONFIG_CMD_BOOTU is not set
> CONFIG_CMD_GO=y
> CONFIG_CMD_RESET=y
> @@ -79,7 +79,6 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> CONFIG_DRIVER_NET_FEC_IMX=y
> CONFIG_NET_USB=y
> CONFIG_NET_USB_ASIX=y
> -CONFIG_DRIVER_SPI_IMX=y
> CONFIG_I2C=y
> CONFIG_I2C_IMX=y
> CONFIG_MTD=y
> @@ -89,7 +88,9 @@ CONFIG_CFI_BUFFER_WRITE=y
> CONFIG_NAND=y
> # CONFIG_NAND_ECC_SOFT is not set
> # CONFIG_NAND_ECC_HW_SYNDROME is not set
> +CONFIG_NAND_ALLOW_ERASE_BAD=y
> CONFIG_NAND_IMX=y
> +CONFIG_NAND_IMX_BBM=y
> CONFIG_MTD_UBI=y
> CONFIG_MTD_UBI_FASTMAP=y
> CONFIG_USB_HOST=y
> @@ -97,7 +98,6 @@ CONFIG_USB_EHCI=y
> CONFIG_USB_ULPI=y
> CONFIG_MCI=y
> CONFIG_MCI_IMX=y
> -CONFIG_MFD_MC13XXX=y
> CONFIG_LED=y
> CONFIG_LED_GPIO=y
> CONFIG_LED_GPIO_OF=y
> --
> 2.8.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-07-11 5:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-08 7:35 [PATCH] ARM: imx_defconfig: enable NAND_IMX_BBM and NAND_ALLOW_ERASE_BAD Uwe Kleine-König
2016-07-11 5:49 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox