mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Kurz <akurz@blala.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM i.MX31: add SPI support
Date: Wed, 3 Aug 2016 07:27:31 +0200	[thread overview]
Message-ID: <20160803052731.GC20657@pengutronix.de> (raw)
In-Reply-To: <1469630524-27224-1-git-send-email-akurz@blala.de>

On Wed, Jul 27, 2016 at 04:42:04PM +0200, Alexander Kurz wrote:
> The i.MX31 SPI interface was refered by freescale as spi_ver_0_4 in one
> of their older vendor extended linux releases. spi_ver_0_4 differs only
> in minor aspects to spi_ver_0_7 (i.MX35) which is already supported by
> barebox.
> Regarding barebox, the differences boil down to the location and length
> of the CHIP SELECT and BIT COUNT/BURST LENGTH elements of CONREG. The
> spi_ver_0_4 variant is limited to single word bursts with a maximum of
> 32 bits_per_word.
> 
> Add support for the i.MX31 SPI interface to the barebox spi_ver_0_7
> implementation.
> 
> Signed-off-by: Alexander Kurz <akurz@blala.de>

Applied, thanks

Sascha

> ---
>  arch/arm/mach-imx/include/mach/devices-imx31.h |  6 +++---
>  drivers/spi/Kconfig                            |  2 +-
>  drivers/spi/imx_spi.c                          | 15 ++++++++++++---
>  include/spi/imx-spi.h                          |  7 +++++++
>  4 files changed, 23 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/include/mach/devices-imx31.h b/arch/arm/mach-imx/include/mach/devices-imx31.h
> index 63319fe..7c70e40 100644
> --- a/arch/arm/mach-imx/include/mach/devices-imx31.h
> +++ b/arch/arm/mach-imx/include/mach/devices-imx31.h
> @@ -4,17 +4,17 @@
>  
>  static inline struct device_d *imx31_add_spi0(struct spi_imx_master *pdata)
>  {
> -	return imx_add_spi_imx27((void *)MX31_CSPI1_BASE_ADDR, 0, pdata);
> +	return imx_add_spi_imx35((void *)MX31_CSPI1_BASE_ADDR, 0, pdata);
>  }
>  
>  static inline struct device_d *imx31_add_spi1(struct spi_imx_master *pdata)
>  {
> -	return imx_add_spi_imx27((void *)MX31_CSPI2_BASE_ADDR, 1, pdata);
> +	return imx_add_spi_imx35((void *)MX31_CSPI2_BASE_ADDR, 1, pdata);
>  }
>  
>  static inline struct device_d *imx31_add_spi2(struct spi_imx_master *pdata)
>  {
> -	return imx_add_spi_imx27((void *)MX31_CSPI3_BASE_ADDR, 2, pdata);
> +	return imx_add_spi_imx35((void *)MX31_CSPI3_BASE_ADDR, 2, pdata);
>  }
>  
>  static inline struct device_d *imx31_add_uart0(void)
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 738b88e..9a71b3b 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -33,7 +33,7 @@ config DRIVER_SPI_IMX_0_0
>  
>  config DRIVER_SPI_IMX_0_7
>  	bool
> -	depends on ARCH_IMX25 || ARCH_IMX35 || ARCH_IMX53
> +	depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX53
>  	default y
>  
>  config DRIVER_SPI_IMX_2_3
> diff --git a/drivers/spi/imx_spi.c b/drivers/spi/imx_spi.c
> index 99ec228..67968e0 100644
> --- a/drivers/spi/imx_spi.c
> +++ b/drivers/spi/imx_spi.c
> @@ -206,7 +206,12 @@ static void cspi_0_7_chipselect(struct spi_device *spi, int is_active)
>  	reg |= spi_imx_clkdiv_2(clk_get_rate(imx->clk), spi->max_speed_hz) <<
>  		CSPI_0_7_CTRL_DR_SHIFT;
>  
> -	reg |= (spi->bits_per_word - 1) << CSPI_0_7_CTRL_BL_SHIFT;
> +	if (cpu_is_mx31())
> +		reg |= ((spi->bits_per_word - 1) & CSPI_0_4_CTRL_BL_MASK)
> +			<< CSPI_0_4_CTRL_BL_SHIFT;
> +	else
> +		reg |= (spi->bits_per_word - 1) << CSPI_0_7_CTRL_BL_SHIFT;
> +
>  	reg |= CSPI_0_7_CTRL_SSCTL;
>  
>  	if (spi->mode & SPI_CPHA)
> @@ -215,8 +220,12 @@ static void cspi_0_7_chipselect(struct spi_device *spi, int is_active)
>  		reg |= CSPI_0_7_CTRL_POL;
>  	if (spi->mode & SPI_CS_HIGH)
>  		reg |= CSPI_0_7_CTRL_SSPOL;
> -	if (gpio < 0)
> -		reg |= (gpio + 32) << CSPI_0_7_CTRL_CS_SHIFT;
> +	if (gpio < 0) {
> +		if (cpu_is_mx31())
> +			reg |= (gpio + 32) << CSPI_0_4_CTRL_CS_SHIFT;
> +		else
> +			reg |= (gpio + 32) << CSPI_0_7_CTRL_CS_SHIFT;
> +	}
>  
>  	writel(reg, base + CSPI_0_7_CTRL);
>  
> diff --git a/include/spi/imx-spi.h b/include/spi/imx-spi.h
> index 221c665..a592573 100644
> --- a/include/spi/imx-spi.h
> +++ b/include/spi/imx-spi.h
> @@ -40,6 +40,12 @@
>  
>  #define CSPI_0_0_RESET_START		(1 << 0)
>  
> +#define CSPI_0_4_CTRL			0x08
> +#define CSPI_0_4_CTRL_BL_SHIFT		8
> +#define CSPI_0_4_CTRL_BL_MASK		0x1f
> +#define CSPI_0_4_CTRL_DRCTL_SHIFT	20
> +#define CSPI_0_4_CTRL_CS_SHIFT		24
> +
>  #define CSPI_0_7_RXDATA			0x00
>  #define CSPI_0_7_TXDATA			0x04
>  #define CSPI_0_7_CTRL			0x08
> @@ -50,6 +56,7 @@
>  #define CSPI_0_7_CTRL_PHA		(1 << 5)
>  #define CSPI_0_7_CTRL_SSCTL		(1 << 6)
>  #define CSPI_0_7_CTRL_SSPOL		(1 << 7)
> +#define CSPI_0_7_CTRL_DRCTL_SHIFT	8
>  #define CSPI_0_7_CTRL_CS_SHIFT		12
>  #define CSPI_0_7_CTRL_DR_SHIFT		16
>  #define CSPI_0_7_CTRL_BL_SHIFT		20
> -- 
> 2.1.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2016-08-03  5:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-27 14:42 Alexander Kurz
2016-08-03  5:27 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160803052731.GC20657@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=akurz@blala.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox