From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 11/23] phy: usb-nop-xceiv: Add clock support
Date: Mon, 16 Jan 2017 11:50:56 +0100 [thread overview]
Message-ID: <20170116105108.13617-12-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20170116105108.13617-1-s.hauer@pengutronix.de>
As stated in the FIXME comment this is needed. Get and
enable a "main_clk" just like the kernel does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/phy/usb-nop-xceiv.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/usb-nop-xceiv.c b/drivers/phy/usb-nop-xceiv.c
index 606e09822..d403fe4d6 100644
--- a/drivers/phy/usb-nop-xceiv.c
+++ b/drivers/phy/usb-nop-xceiv.c
@@ -27,6 +27,7 @@ struct nop_usbphy {
struct usb_phy usb_phy;
struct phy *phy;
struct phy_provider *provider;
+ struct clk *clk;
};
static struct phy *nop_usbphy_xlate(struct device_d *dev,
@@ -37,6 +38,13 @@ static struct phy *nop_usbphy_xlate(struct device_d *dev,
return nopphy->phy;
}
+static int nop_usbphy_init(struct phy *phy)
+{
+ struct nop_usbphy *nopphy = phy_get_drvdata(phy);
+
+ return clk_enable(nopphy->clk);
+}
+
static struct usb_phy *nop_usbphy_to_usbphy(struct phy *phy)
{
struct nop_usbphy *nopphy = phy_get_drvdata(phy);
@@ -46,6 +54,7 @@ static struct usb_phy *nop_usbphy_to_usbphy(struct phy *phy)
static const struct phy_ops nop_phy_ops = {
.to_usbphy = nop_usbphy_to_usbphy,
+ .init = nop_usbphy_init,
};
static int nop_usbphy_probe(struct device_d *dev)
@@ -57,7 +66,10 @@ static int nop_usbphy_probe(struct device_d *dev)
dev->priv = nopphy;
- /* FIXME: Add clk support */
+ nopphy->clk = clk_get(dev, "main_clk");
+ if (IS_ERR(nopphy->clk))
+ nopphy->clk = NULL;
+
/* FIXME: Add vbus regulator support */
/* FIXME: Add vbus-detect-gpio support */
@@ -97,8 +109,8 @@ static struct driver_d nop_usbphy_driver = {
.of_compatible = DRV_OF_COMPAT(nop_usbphy_dt_ids),
};
-static int nop_usbphy_init(void)
+static int nop_usbphy_driver_init(void)
{
return platform_driver_register(&nop_usbphy_driver);
}
-fs_initcall(nop_usbphy_init);
+fs_initcall(nop_usbphy_driver_init);
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-01-16 10:51 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-16 10:50 i.MX7 support Sascha Hauer
2017-01-16 10:50 ` [PATCH 01/23] imx-usb-loader: let constant data be const Sascha Hauer
2017-01-16 10:50 ` [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static Sascha Hauer
2017-01-16 11:29 ` Juergen Borleis
2017-01-16 10:50 ` [PATCH 03/23] imx-usb-loader: add i.MX7S support Sascha Hauer
2017-01-16 10:50 ` [PATCH 04/23] ARM: Makefile: format fix Sascha Hauer
2017-01-16 10:50 ` [PATCH 05/23] i2c: i.MX: Enable clock Sascha Hauer
2017-01-16 10:50 ` [PATCH 06/23] mci: imx-esdhc: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 07/23] serial: i.MX: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 08/23] usb: imx: Make usb-misc multi instance safe Sascha Hauer
2017-01-16 10:50 ` [PATCH 09/23] usb: imx: Add usbmisc support for i.MX7 Sascha Hauer
2017-01-16 10:50 ` [PATCH 10/23] usb: imx: Add clock support Sascha Hauer
2017-01-16 10:50 ` Sascha Hauer [this message]
2017-01-16 10:50 ` [PATCH 12/23] of: partitions: force "partitions" subnode Sascha Hauer
2017-01-16 10:50 ` [PATCH 13/23] mci: Allow to partition eMMC boot partitions Sascha Hauer
2017-01-16 10:50 ` [PATCH 14/23] mci: imx-esdhci: remove wrong write protection test Sascha Hauer
2017-01-16 10:51 ` [PATCH 15/23] ARM: i.MX: Add i.MX7 base architecture support Sascha Hauer
2017-01-16 10:51 ` [PATCH 16/23] clk: i.MX: pllv3: Add support for the i.MX7 enet pll Sascha Hauer
2017-01-16 10:51 ` [PATCH 17/23] clk: imx: Add clk-cpu support Sascha Hauer
2017-01-16 10:51 ` [PATCH 18/23] clk: i.MX: Add clock support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` [PATCH 19/23] clk: i.MX7: Add missing USB clocks Sascha Hauer
2017-01-16 10:51 ` [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support Sascha Hauer
2017-01-16 11:35 ` Juergen Borleis
2017-01-16 10:51 ` [PATCH 21/23] pinmmux: i.MX: add pin mux support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` [PATCH 22/23] serial: i.MX: add i.MX7 support Sascha Hauer
2017-01-16 10:51 ` [PATCH 23/23] ARM: i.MX: Add WaRP7 board support Sascha Hauer
2017-01-16 10:58 ` i.MX7 support Fabio Estevam
2017-01-16 12:58 ` Sascha Hauer
2017-01-17 12:07 ` Fabio Estevam
2017-01-18 7:07 ` Sascha Hauer
2017-01-18 9:36 ` Fabio Estevam
2017-01-19 9:14 ` Sascha Hauer
2017-01-19 11:54 ` Fabio Estevam
2017-01-19 12:38 ` Sascha Hauer
2017-01-19 17:32 ` Fabio Estevam
2017-01-16 11:02 ` Belisko Marek
2017-01-16 11:38 ` Robert Schwebel
2017-01-16 11:51 ` Belisko Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170116105108.13617-12-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox