mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 19/23] clk: i.MX7: Add missing USB clocks
Date: Mon, 16 Jan 2017 11:51:04 +0100	[thread overview]
Message-ID: <20170116105108.13617-20-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20170116105108.13617-1-s.hauer@pengutronix.de>

The USB clocks are missing in the Kernel clock code. Add them here.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/imx/clk-imx7.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/imx/clk-imx7.c b/drivers/clk/imx/clk-imx7.c
index c8424fe07..45c5a4667 100644
--- a/drivers/clk/imx/clk-imx7.c
+++ b/drivers/clk/imx/clk-imx7.c
@@ -791,6 +791,9 @@ static int imx7_ccm_probe(struct device_d *dev)
 	clks[IMX7D_EIM_ROOT_CLK] = imx_clk_gate4("eim_root_clk", "eim_post_div", base + 0x4160, 0);
 	clks[IMX7D_NAND_ROOT_CLK] = imx_clk_gate4("nand_root_clk", "nand_post_div", base + 0x4140, 0);
 	clks[IMX7D_QSPI_ROOT_CLK] = imx_clk_gate4("qspi_root_clk", "qspi_post_div", base + 0x4150, 0);
+	clks[IMX7D_USB_CTRL_CLK] = imx_clk_gate4("usb_ctrl_clk", "osc", base + 0x4680, 0);
+	clks[IMX7D_USB_PHY1_CLK] = imx_clk_gate4("usbphy1_clk", "osc", base + 0x46a0, 0);
+	clks[IMX7D_USB_PHY2_CLK] = imx_clk_gate4("usbphy2_clk", "osc", base + 0x46b0, 0);
 	clks[IMX7D_USDHC1_ROOT_CLK] = imx_clk_gate4("usdhc1_root_clk", "usdhc1_post_div", base + 0x46c0, 0);
 	clks[IMX7D_USDHC2_ROOT_CLK] = imx_clk_gate4("usdhc2_root_clk", "usdhc2_post_div", base + 0x46d0, 0);
 	clks[IMX7D_USDHC3_ROOT_CLK] = imx_clk_gate4("usdhc3_root_clk", "usdhc3_post_div", base + 0x46e0, 0);
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-01-16 10:51 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-16 10:50 i.MX7 support Sascha Hauer
2017-01-16 10:50 ` [PATCH 01/23] imx-usb-loader: let constant data be const Sascha Hauer
2017-01-16 10:50 ` [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static Sascha Hauer
2017-01-16 11:29   ` Juergen Borleis
2017-01-16 10:50 ` [PATCH 03/23] imx-usb-loader: add i.MX7S support Sascha Hauer
2017-01-16 10:50 ` [PATCH 04/23] ARM: Makefile: format fix Sascha Hauer
2017-01-16 10:50 ` [PATCH 05/23] i2c: i.MX: Enable clock Sascha Hauer
2017-01-16 10:50 ` [PATCH 06/23] mci: imx-esdhc: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 07/23] serial: i.MX: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 08/23] usb: imx: Make usb-misc multi instance safe Sascha Hauer
2017-01-16 10:50 ` [PATCH 09/23] usb: imx: Add usbmisc support for i.MX7 Sascha Hauer
2017-01-16 10:50 ` [PATCH 10/23] usb: imx: Add clock support Sascha Hauer
2017-01-16 10:50 ` [PATCH 11/23] phy: usb-nop-xceiv: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 12/23] of: partitions: force "partitions" subnode Sascha Hauer
2017-01-16 10:50 ` [PATCH 13/23] mci: Allow to partition eMMC boot partitions Sascha Hauer
2017-01-16 10:50 ` [PATCH 14/23] mci: imx-esdhci: remove wrong write protection test Sascha Hauer
2017-01-16 10:51 ` [PATCH 15/23] ARM: i.MX: Add i.MX7 base architecture support Sascha Hauer
2017-01-16 10:51 ` [PATCH 16/23] clk: i.MX: pllv3: Add support for the i.MX7 enet pll Sascha Hauer
2017-01-16 10:51 ` [PATCH 17/23] clk: imx: Add clk-cpu support Sascha Hauer
2017-01-16 10:51 ` [PATCH 18/23] clk: i.MX: Add clock support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` Sascha Hauer [this message]
2017-01-16 10:51 ` [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support Sascha Hauer
2017-01-16 11:35   ` Juergen Borleis
2017-01-16 10:51 ` [PATCH 21/23] pinmmux: i.MX: add pin mux support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` [PATCH 22/23] serial: i.MX: add i.MX7 support Sascha Hauer
2017-01-16 10:51 ` [PATCH 23/23] ARM: i.MX: Add WaRP7 board support Sascha Hauer
2017-01-16 10:58 ` i.MX7 support Fabio Estevam
2017-01-16 12:58   ` Sascha Hauer
2017-01-17 12:07     ` Fabio Estevam
2017-01-18  7:07       ` Sascha Hauer
2017-01-18  9:36         ` Fabio Estevam
2017-01-19  9:14           ` Sascha Hauer
2017-01-19 11:54             ` Fabio Estevam
2017-01-19 12:38               ` Sascha Hauer
2017-01-19 17:32                 ` Fabio Estevam
2017-01-16 11:02 ` Belisko Marek
2017-01-16 11:38   ` Robert Schwebel
2017-01-16 11:51     ` Belisko Marek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170116105108.13617-20-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox