From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Cc: Juergen Borleis <jbe@pengutronix.de>
Subject: [PATCH 21/23] pinmmux: i.MX: add pin mux support for i.MX7
Date: Mon, 16 Jan 2017 11:51:06 +0100 [thread overview]
Message-ID: <20170116105108.13617-22-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20170116105108.13617-1-s.hauer@pengutronix.de>
From: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/pinctrl/imx-iomux-v3.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/imx-iomux-v3.c b/drivers/pinctrl/imx-iomux-v3.c
index 4b3f03389..1dc46e81a 100644
--- a/drivers/pinctrl/imx-iomux-v3.c
+++ b/drivers/pinctrl/imx-iomux-v3.c
@@ -24,6 +24,7 @@
#include <pinctrl.h>
#include <malloc.h>
#include <mach/iomux-v3.h>
+#include <mach/generic.h>
struct imx_iomux_v3 {
void __iomem *base;
@@ -41,7 +42,7 @@ static void imx_iomuxv3_setup_single(void __iomem *base, struct device_d *dev,
"mux: 0x%08x -> 0x%04x, conf: 0x%08x -> 0x%04x input: 0x%08x -> 0x%04x\n",
mux_val, mux_reg, conf_val, conf_reg, input_val, input_reg);
- if (mux_reg)
+ if (mux_reg || cpu_is_mx7())
writel(mux_val, base + mux_reg);
if (conf_reg)
writel(conf_val, base + conf_reg);
@@ -209,6 +210,8 @@ static __maybe_unused struct of_device_id imx_iomux_v3_dt_ids[] = {
}, {
.compatible = "fsl,imx6ul-iomuxc",
}, {
+ .compatible = "fsl,imx7d-iomuxc",
+ }, {
/* sentinel */
}
};
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-01-16 10:51 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-16 10:50 i.MX7 support Sascha Hauer
2017-01-16 10:50 ` [PATCH 01/23] imx-usb-loader: let constant data be const Sascha Hauer
2017-01-16 10:50 ` [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static Sascha Hauer
2017-01-16 11:29 ` Juergen Borleis
2017-01-16 10:50 ` [PATCH 03/23] imx-usb-loader: add i.MX7S support Sascha Hauer
2017-01-16 10:50 ` [PATCH 04/23] ARM: Makefile: format fix Sascha Hauer
2017-01-16 10:50 ` [PATCH 05/23] i2c: i.MX: Enable clock Sascha Hauer
2017-01-16 10:50 ` [PATCH 06/23] mci: imx-esdhc: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 07/23] serial: i.MX: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 08/23] usb: imx: Make usb-misc multi instance safe Sascha Hauer
2017-01-16 10:50 ` [PATCH 09/23] usb: imx: Add usbmisc support for i.MX7 Sascha Hauer
2017-01-16 10:50 ` [PATCH 10/23] usb: imx: Add clock support Sascha Hauer
2017-01-16 10:50 ` [PATCH 11/23] phy: usb-nop-xceiv: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 12/23] of: partitions: force "partitions" subnode Sascha Hauer
2017-01-16 10:50 ` [PATCH 13/23] mci: Allow to partition eMMC boot partitions Sascha Hauer
2017-01-16 10:50 ` [PATCH 14/23] mci: imx-esdhci: remove wrong write protection test Sascha Hauer
2017-01-16 10:51 ` [PATCH 15/23] ARM: i.MX: Add i.MX7 base architecture support Sascha Hauer
2017-01-16 10:51 ` [PATCH 16/23] clk: i.MX: pllv3: Add support for the i.MX7 enet pll Sascha Hauer
2017-01-16 10:51 ` [PATCH 17/23] clk: imx: Add clk-cpu support Sascha Hauer
2017-01-16 10:51 ` [PATCH 18/23] clk: i.MX: Add clock support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` [PATCH 19/23] clk: i.MX7: Add missing USB clocks Sascha Hauer
2017-01-16 10:51 ` [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support Sascha Hauer
2017-01-16 11:35 ` Juergen Borleis
2017-01-16 10:51 ` Sascha Hauer [this message]
2017-01-16 10:51 ` [PATCH 22/23] serial: i.MX: add " Sascha Hauer
2017-01-16 10:51 ` [PATCH 23/23] ARM: i.MX: Add WaRP7 board support Sascha Hauer
2017-01-16 10:58 ` i.MX7 support Fabio Estevam
2017-01-16 12:58 ` Sascha Hauer
2017-01-17 12:07 ` Fabio Estevam
2017-01-18 7:07 ` Sascha Hauer
2017-01-18 9:36 ` Fabio Estevam
2017-01-19 9:14 ` Sascha Hauer
2017-01-19 11:54 ` Fabio Estevam
2017-01-19 12:38 ` Sascha Hauer
2017-01-19 17:32 ` Fabio Estevam
2017-01-16 11:02 ` Belisko Marek
2017-01-16 11:38 ` Robert Schwebel
2017-01-16 11:51 ` Belisko Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170116105108.13617-22-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jbe@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox