mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Fabio Estevam <festevam@gmail.com>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: i.MX7 support
Date: Wed, 18 Jan 2017 08:07:38 +0100	[thread overview]
Message-ID: <20170118070738.g5a7rdahunjes4jl@pengutronix.de> (raw)
In-Reply-To: <CAOMZO5AF3Zo6pJsF41=-maoVAd1w4TeqcS71atROn7gh0eYTzg@mail.gmail.com>

On Tue, Jan 17, 2017 at 10:07:14AM -0200, Fabio Estevam wrote:
> Hi Sascha,
> 
> On Mon, Jan 16, 2017 at 10:58 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> 
> > Yes, I did. I configured MX7D_PAD_GPIO1_IO00 as WDOD1_WDOG_B, still my
> > board only hangs. I also tried configuring it as GPIO. When toggling the
> > gpio the board only hangs. I also tried different variations of the
> > watchdog SRS/WDA bits. I think there is some other piece I am missing.
> 
> What is the version of your warp7 board: rev1.0 or rev2.0? The version
> number is written on the CPU board.
> 
> warp rev1.0 did not connect the WDOD1_WDOG_B pin to the PMIC and is
> not capable of resetting the system.
> 
> warp7 rev2.0 does connect the WDOD1_WDOG_B pin to the PMIC and the
> reset works fine.

I have a rev 2.0 board here.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-01-18  7:08 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-16 10:50 Sascha Hauer
2017-01-16 10:50 ` [PATCH 01/23] imx-usb-loader: let constant data be const Sascha Hauer
2017-01-16 10:50 ` [PATCH 02/23] imx-usb-loader: this table is used internally only, so keep it static Sascha Hauer
2017-01-16 11:29   ` Juergen Borleis
2017-01-16 10:50 ` [PATCH 03/23] imx-usb-loader: add i.MX7S support Sascha Hauer
2017-01-16 10:50 ` [PATCH 04/23] ARM: Makefile: format fix Sascha Hauer
2017-01-16 10:50 ` [PATCH 05/23] i2c: i.MX: Enable clock Sascha Hauer
2017-01-16 10:50 ` [PATCH 06/23] mci: imx-esdhc: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 07/23] serial: i.MX: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 08/23] usb: imx: Make usb-misc multi instance safe Sascha Hauer
2017-01-16 10:50 ` [PATCH 09/23] usb: imx: Add usbmisc support for i.MX7 Sascha Hauer
2017-01-16 10:50 ` [PATCH 10/23] usb: imx: Add clock support Sascha Hauer
2017-01-16 10:50 ` [PATCH 11/23] phy: usb-nop-xceiv: " Sascha Hauer
2017-01-16 10:50 ` [PATCH 12/23] of: partitions: force "partitions" subnode Sascha Hauer
2017-01-16 10:50 ` [PATCH 13/23] mci: Allow to partition eMMC boot partitions Sascha Hauer
2017-01-16 10:50 ` [PATCH 14/23] mci: imx-esdhci: remove wrong write protection test Sascha Hauer
2017-01-16 10:51 ` [PATCH 15/23] ARM: i.MX: Add i.MX7 base architecture support Sascha Hauer
2017-01-16 10:51 ` [PATCH 16/23] clk: i.MX: pllv3: Add support for the i.MX7 enet pll Sascha Hauer
2017-01-16 10:51 ` [PATCH 17/23] clk: imx: Add clk-cpu support Sascha Hauer
2017-01-16 10:51 ` [PATCH 18/23] clk: i.MX: Add clock support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` [PATCH 19/23] clk: i.MX7: Add missing USB clocks Sascha Hauer
2017-01-16 10:51 ` [PATCH 20/23] ARM: i.MX: gpt: Add i.MX7 support Sascha Hauer
2017-01-16 11:35   ` Juergen Borleis
2017-01-16 10:51 ` [PATCH 21/23] pinmmux: i.MX: add pin mux support for i.MX7 Sascha Hauer
2017-01-16 10:51 ` [PATCH 22/23] serial: i.MX: add i.MX7 support Sascha Hauer
2017-01-16 10:51 ` [PATCH 23/23] ARM: i.MX: Add WaRP7 board support Sascha Hauer
2017-01-16 10:58 ` i.MX7 support Fabio Estevam
2017-01-16 12:58   ` Sascha Hauer
2017-01-17 12:07     ` Fabio Estevam
2017-01-18  7:07       ` Sascha Hauer [this message]
2017-01-18  9:36         ` Fabio Estevam
2017-01-19  9:14           ` Sascha Hauer
2017-01-19 11:54             ` Fabio Estevam
2017-01-19 12:38               ` Sascha Hauer
2017-01-19 17:32                 ` Fabio Estevam
2017-01-16 11:02 ` Belisko Marek
2017-01-16 11:38   ` Robert Schwebel
2017-01-16 11:51     ` Belisko Marek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170118070738.g5a7rdahunjes4jl@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=festevam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox