From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 2/2] watchdog: i.MX: Fix internal/external reset
Date: Thu, 19 Jan 2017 16:03:52 +0100 [thread overview]
Message-ID: <20170119150352.5421-2-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20170119150352.5421-1-s.hauer@pengutronix.de>
The watchdog can either reset only the SoC or assert the WDOG_B
output signal instead. On some boards it's necessary to use the
external WDOG_B output to make sure that external devices like the
PMIC are also properly resetted. This has been fixed in the Linux
driver which honours a fsl,ext-reset-output device tree property
to select between both ways. Do the same in the barebox driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/watchdog/imxwd.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c
index c736fdaa3..84dea802b 100644
--- a/drivers/watchdog/imxwd.c
+++ b/drivers/watchdog/imxwd.c
@@ -36,6 +36,7 @@ struct imx_wd {
struct device_d *dev;
const struct imx_wd_ops *ops;
struct restart_handler restart;
+ bool ext_reset;
};
#define to_imx_wd(h) container_of(h, struct imx_wd, wd)
@@ -51,6 +52,7 @@ struct imx_wd {
#define IMX21_WDOG_WSTR 0x04 /* Watchdog Status Register */
#define IMX21_WDOG_WMCR 0x08 /* Misc Register */
#define IMX21_WDOG_WCR_WDE (1 << 2)
+#define IMX21_WDOG_WCR_WDT (1 << 3)
#define IMX21_WDOG_WCR_SRS (1 << 4)
#define IMX21_WDOG_WCR_WDA (1 << 5)
@@ -109,6 +111,9 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, int timeout)
val = ((timeout * 2 - 1) << 8) | IMX21_WDOG_WCR_SRS |
IMX21_WDOG_WCR_WDA;
+ if (priv->ext_reset)
+ val |= IMX21_WDOG_WCR_WDT;
+
writew(IMX21_WDOG_WCR_WDE | val, priv->base + IMX21_WDOG_WCR);
/* Write Service Sequence */
@@ -120,9 +125,13 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, int timeout)
static void imx21_soc_reset(struct imx_wd *priv)
{
- u16 val;
+ u16 val = 0;
- val = IMX21_WDOG_WCR_SRS | IMX21_WDOG_WCR_WDA;
+ /* Use internal reset or external - not both */
+ if (priv->ext_reset)
+ val |= IMX21_WDOG_WCR_SRS; /* do not assert int reset */
+ else
+ val |= IMX21_WDOG_WCR_WDA; /* do not assert ext-reset */
writew(val, priv->base + IMX21_WDOG_WCR);
}
@@ -202,6 +211,9 @@ static int imx_wd_probe(struct device_d *dev)
priv->wd.dev = dev;
priv->dev = dev;
+ priv->ext_reset = of_property_read_bool(dev->device_node,
+ "fsl,ext-reset-output");
+
if (IS_ENABLED(CONFIG_WATCHDOG_IMX)) {
ret = watchdog_register(&priv->wd);
if (ret)
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-01-19 15:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-19 15:03 [PATCH 1/2] watchdog: i.MX: add soc_reset operation Sascha Hauer
2017-01-19 15:03 ` Sascha Hauer [this message]
2017-01-20 5:39 ` Sam Ravnborg
2017-01-20 5:44 ` Sam Ravnborg
2017-01-20 8:10 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170119150352.5421-2-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox