mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Peter Mamonov <pmamonov@gmail.com>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ata: new driver to support the internal sata controller on Armada-XP
Date: Thu, 26 Jan 2017 17:30:27 +0300	[thread overview]
Message-ID: <20170126143027.GB21086@berta> (raw)
In-Reply-To: <20170126100159.6036-1-u.kleine-koenig@pengutronix.de>

Hi Uwe,

Our approach for the same problem was to put SATA PHY initialization into the 
board specific code (I guess in your case it is 
arch/arm/boards/marvell-armada-xp-gp/board.c) and bind the generic ATA driver 
(drivers/ata/intf_platform_ide.c) via the device tree.

Regards,
Peter

On Thu, Jan 26, 2017 at 11:01:59AM +0100, Uwe Kleine-König wrote:
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  drivers/ata/Kconfig   |   5 ++
>  drivers/ata/Makefile  |   1 +
>  drivers/ata/sata_mv.c | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 132 insertions(+)
>  create mode 100644 drivers/ata/sata_mv.c
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 7850e4a9c967..0234c66c8ec8 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -42,6 +42,11 @@ config DISK_AHCI_IMX
>  	depends on DISK_AHCI
>  	bool "i.MX AHCI support"
>  
> +config DISK_SATA_MV
> +	depends on ARCH_MVEBU
> +	select DISK_IDE_SFF
> +	bool "Marvell SATA support"
> +
>  comment "interface types"
>  
>  config DISK_INTF_PLATFORM_IDE
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index c444c4d1962e..6b83ae2ef542 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -5,6 +5,7 @@ obj-$(CONFIG_DISK_IDE_SFF) += ide-sff.o
>  obj-$(CONFIG_DISK_ATA) += disk_ata_drive.o
>  obj-$(CONFIG_DISK_AHCI) += ahci.o
>  obj-$(CONFIG_DISK_AHCI_IMX) += sata-imx.o
> +obj-$(CONFIG_DISK_SATA_MV) += sata_mv.o
>  
>  # interface types
>  
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> new file mode 100644
> index 000000000000..22b29d08a579
> --- /dev/null
> +++ b/drivers/ata/sata_mv.c
> @@ -0,0 +1,126 @@
> +#include <common.h>
> +#include <clock.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <ata_drive.h>
> +
> +#include <asm/io.h>
> +
> +/* This can/should be moved to a more generic place */
> +static void ata_ioports_init(struct ata_ioports *io,
> +			     void *base_data, void *base_reg, void *base_alt,
> +			     unsigned stride)
> +{
> +	/* io->cmd_addr is unused */;
> +	io->data_addr = base_data;
> +	io->error_addr = base_reg + 1 * stride;
> +	/* io->feature_addr is unused */
> +	io->nsect_addr = base_reg + 2 * stride;
> +	io->lbal_addr = base_reg + 3 * stride;
> +	io->lbam_addr = base_reg + 4 * stride;
> +	io->lbah_addr = base_reg + 5 * stride;
> +	io->device_addr = base_reg + 6 * stride;
> +	io->status_addr = base_reg + 7 * stride;
> +	io->command_addr = base_reg + 7 * stride;
> +	/* io->altstatus_addr is unused */
> +
> +	if (base_alt)
> +		io->ctl_addr = base_alt;
> +	else
> +		io->ctl_addr = io->status_addr;
> +
> +	/* io->alt_dev_addr is unused */
> +}
> +
> +#define REG_WINDOW_CONTROL(n)	((n) * 0x10 + 0x30)
> +#define REG_WINDOW_BASE(n)	((n) * 0x10 + 0x34)
> +
> +#define REG_EDMA_COMMAND(n)	((n) * 0x2000 + 0x2028)
> +#define REG_EDMA_COMMAND__EATARST	0x00000004
> +
> +#define REG_ATA_BASE		0x2100
> +#define REG_SSTATUS(n)		((n) * 0x2000 + 0x2300)
> +#define REG_SCONTROL(n)		((n) * 0x2000 + 0x2308)
> +#define REG_SCONTROL__DET		0x0000000f
> +#define REG_SCONTROL__DET__INIT		0x00000001
> +#define REG_SCONTROL__DET__PHYOK	0x00000002
> +#define REG_SCONTROL__IPM		0x00000f00
> +#define REG_SCONTROL__IPM__PARTIAL	0x00000100
> +#define REG_SCONTROL__IPM__SLUMBER	0x00000200
> +
> +static int mv_sata_probe(struct device_d *dev)
> +{
> +	struct resource *iores;
> +	void __iomem *base;
> +	struct ide_port *ide;
> +	u32 scontrol;
> +	int ret, i;
> +
> +	iores = dev_request_mem_resource(dev, 0);
> +	if (IS_ERR(iores)) {
> +		dev_err(dev, "Failed to request mem resources\n");
> +		return PTR_ERR(iores);
> +	}
> +	base = IOMEM(iores->start);
> +
> +	/* disable MBus windows */
> +	for (i = 0; i < 4; ++i) {
> +		writel(0, base + REG_WINDOW_CONTROL(i));
> +		writel(0, base + REG_WINDOW_BASE(i));
> +	}
> +
> +	/* enable first window */
> +	writel(0x7fff0e01, base + REG_WINDOW_CONTROL(0));
> +	writel(0, base + REG_WINDOW_BASE(0));
> +
> +	writel(REG_EDMA_COMMAND__EATARST, base + REG_EDMA_COMMAND(0));
> +	udelay(25);
> +	writel(0x0, base + REG_EDMA_COMMAND(0));
> +
> +	scontrol = readl(base + REG_SCONTROL(0));
> +	scontrol &= ~(REG_SCONTROL__DET | REG_SCONTROL__IPM);
> +	/* disable power management */
> +	scontrol |= REG_SCONTROL__IPM__PARTIAL | REG_SCONTROL__IPM__SLUMBER;
> +
> +	/* perform interface communication initialization */
> +	writel(scontrol | REG_SCONTROL__DET__INIT, base + REG_SCONTROL(0));
> +	writel(scontrol, base + REG_SCONTROL(0));
> +
> +	ret = wait_on_timeout(10 * MSECOND,
> +			      (readl(base + REG_SSTATUS(0)) & REG_SCONTROL__DET) == (REG_SCONTROL__DET__INIT | REG_SCONTROL__DET__PHYOK));
> +	if (ret) {
> +		dev_err(dev, "Failed to wait for phy (sstatus=0x%08x)\n",
> +			readl(base + REG_SSTATUS(0)));
> +		return ret;
> +	}
> +
> +	ide = xzalloc(sizeof(*ide));
> +
> +	ide->port.dev = dev;
> +
> +	ata_ioports_init(&ide->io, base + REG_ATA_BASE, base + REG_ATA_BASE,
> +			 NULL, 4);
> +
> +	dev->priv = ide;
> +
> +	ret = ide_port_register(ide);
> +	if (ret)
> +		free(ide);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id mv_sata_dt_ids[] = {
> +	{
> +		.compatible = "marvell,armada-370-sata",
> +	}, {
> +		/* sentinel */
> +	}
> +};
> +
> +static struct driver_d mv_sata_driver = {
> +	.name = "mv_sata",
> +	.probe = mv_sata_probe,
> +	.of_compatible = mv_sata_dt_ids,
> +};
> +device_platform_driver(mv_sata_driver);
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-01-26 14:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-26 10:01 Uwe Kleine-König
2017-01-26 14:30 ` Peter Mamonov [this message]
2017-02-14  8:49   ` Uwe Kleine-König
2017-02-24  7:20 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170126143027.GB21086@berta \
    --to=pmamonov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox