From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-pf0-f196.google.com ([209.85.192.196]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1cZgCa-0002zl-6v for barebox@lists.infradead.org; Fri, 03 Feb 2017 15:55:18 +0000 Received: by mail-pf0-f196.google.com with SMTP id 19so1812192pfo.3 for ; Fri, 03 Feb 2017 07:54:47 -0800 (PST) From: Andrey Smirnov Date: Fri, 3 Feb 2017 07:53:23 -0800 Message-Id: <20170203155323.29430-1-andrew.smirnov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v2] i.MX: vf610: Add support for ZII VF610 Dev Family To: barebox@lists.infradead.org Cc: Andrey Smirnov Add support for ZII VF610 Dev based designs such as: - VF610 Dev, revision B - VF610 Dev, revision C - CFU1, revision A - SPU3, revision A - SCU4 AIB, revision C Signed-off-by: Andrey Smirnov --- Changes since v1: - Removed questionable preprocessor-level checks - Converted board.c to use 'struct gpio'/gpio_request_array (as opposed to using custom type) arch/arm/boards/Makefile | 1 + arch/arm/boards/zii-vf610-dev/Makefile | 3 + arch/arm/boards/zii-vf610-dev/board.c | 149 +++++++ .../zii-vf610-dev/defaultenv-zii-vf610-dev/boot/sd | 4 + .../defaultenv-zii-vf610-dev/init/automount-sd | 13 + .../defaultenv-zii-vf610-dev/init/choose-dtb | 4 + .../flash-header-zii-vf610-dev.imxcfg | 243 +++++++++++ arch/arm/boards/zii-vf610-dev/lowlevel.c | 137 ++++++ arch/arm/configs/zii_vf610_dev_defconfig | 165 ++++++++ arch/arm/dts/Makefile | 7 + arch/arm/dts/vf610-zii-cfu1-rev-a.dts | 208 ++++++++++ arch/arm/dts/vf610-zii-dev-rev-b.dts | 431 +++++++++++++++++++ arch/arm/dts/vf610-zii-dev-rev-c.dts | 445 ++++++++++++++++++++ arch/arm/dts/vf610-zii-dev.dtsi | 436 ++++++++++++++++++++ arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts | 457 +++++++++++++++++++++ arch/arm/dts/vf610-zii-spu3-rev-a.dts | 140 +++++++ arch/arm/mach-imx/Kconfig | 5 + images/Makefile.imx | 5 + 18 files changed, 2853 insertions(+) create mode 100644 arch/arm/boards/zii-vf610-dev/Makefile create mode 100644 arch/arm/boards/zii-vf610-dev/board.c create mode 100644 arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/boot/sd create mode 100644 arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/automount-sd create mode 100644 arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/choose-dtb create mode 100644 arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg create mode 100644 arch/arm/boards/zii-vf610-dev/lowlevel.c create mode 100644 arch/arm/configs/zii_vf610_dev_defconfig create mode 100644 arch/arm/dts/vf610-zii-cfu1-rev-a.dts create mode 100644 arch/arm/dts/vf610-zii-dev-rev-b.dts create mode 100644 arch/arm/dts/vf610-zii-dev-rev-c.dts create mode 100644 arch/arm/dts/vf610-zii-dev.dtsi create mode 100644 arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts create mode 100644 arch/arm/dts/vf610-zii-spu3-rev-a.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index fe5c209..cd8f49f 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -142,3 +142,4 @@ obj-$(CONFIG_MACH_VSCOM_BALTOS) += vscom-baltos/ obj-$(CONFIG_MACH_QEMU_VIRT64) += qemu-virt64/ obj-$(CONFIG_MACH_VF610_TWR) += freescale-vf610-twr/ obj-$(CONFIG_MACH_ZII_RDU2) += zii-imx6q-rdu2/ +obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/ diff --git a/arch/arm/boards/zii-vf610-dev/Makefile b/arch/arm/boards/zii-vf610-dev/Makefile new file mode 100644 index 0000000..1297d81 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/Makefile @@ -0,0 +1,3 @@ +obj-y += board.o +lwl-y += lowlevel.o +bbenv-y += defaultenv-zii-vf610-dev diff --git a/arch/arm/boards/zii-vf610-dev/board.c b/arch/arm/boards/zii-vf610-dev/board.c new file mode 100644 index 0000000..eea3828 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/board.c @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2016 Zodiac Inflight Innovation + * Author: Andrey Smirnov + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + + +static int expose_signals(const struct gpio *signals, + size_t signal_num) +{ + int ret, i; + + ret = gpio_request_array(signals, signal_num); + if (ret) + return ret; + + for (i = 0; i < signal_num; i++) + export_env_ull(signals[i].label, signals[i].gpio); + + return 0; +} + +static int zii_vf610_cfu1_expose_signals(void) +{ + static const struct gpio signals[] = { + { + .gpio = 132, + .flags = GPIOF_IN, + .label = "fim_sd", + }, + { + .gpio = 118, + .flags = GPIOF_OUT_INIT_LOW, + .label = "fim_tdis", + }, + }; + + if (!of_machine_is_compatible("zii,vf610cfu1-a")) + return 0; + + return expose_signals(signals, ARRAY_SIZE(signals)); +} +late_initcall(zii_vf610_cfu1_expose_signals); + +static int zii_vf610_cfu1_spu3_expose_signals(void) +{ + static const struct gpio signals[] = { + { + .gpio = 107, + .flags = GPIOF_OUT_INIT_LOW, + .label = "soc_sw_rstn", + }, + { + .gpio = 98, + .flags = GPIOF_IN, + .label = "e6352_intn", + }, + }; + + if (!of_machine_is_compatible("zii,vf610spu3-a") && + !of_machine_is_compatible("zii,vf610cfu1-a")) + return 0; + + return expose_signals(signals, ARRAY_SIZE(signals)); +} +late_initcall(zii_vf610_cfu1_spu3_expose_signals); + +static int zii_vf610_dev_print_clocks(void) +{ + int i; + struct clk *clk; + struct device_node *ccm_np; + const unsigned long MHz = 1000000; + const char *clk_names[] = { "cpu", "ddr", "bus", "ipg" }; + + if (!of_machine_is_compatible("zii,vf610dev")) + return 0; + + ccm_np = of_find_compatible_node(NULL, NULL, "fsl,vf610-ccm"); + if (!ccm_np) { + pr_err("Couln't get CCM node\n"); + return -ENOENT; + } + + for (i = 0; i < ARRAY_SIZE(clk_names); i++) { + unsigned long rate; + const char *name = clk_names[i]; + + clk = of_clk_get_by_name(ccm_np, name); + if (IS_ERR(clk)) { + pr_err("Failed to get '%s' clock (%ld)\n", + name, PTR_ERR(clk)); + return PTR_ERR(clk); + } + + rate = clk_get_rate(clk); + + pr_info("%s clock : %8lu MHz\n", name, rate / MHz); + } + + return 0; +} +late_initcall(zii_vf610_dev_print_clocks); + +static int zii_vf610_dev_set_hostname(void) +{ + size_t i; + static const struct { + const char *compatible; + const char *hostname; + } boards[] = { + { "zii,vf610spu3-a", "spu3-rev-a" }, + { "zii,vf610cfu1-a", "cfu1-rev-a" }, + { "zii,vf610dev-b", "dev-rev-b" }, + { "zii,vf610dev-c", "dev-rev-c" }, + { "zii,vf610scu4-aib-c", "scu4-aib-rev-c" }, + }; + + if (!of_machine_is_compatible("zii,vf610dev")) + return 0; + + for (i = 0; i < ARRAY_SIZE(boards); i++) { + if (of_machine_is_compatible(boards[i].compatible)) { + barebox_set_hostname(boards[i].hostname); + break; + } + } + + defaultenv_append_directory(defaultenv_zii_vf610_dev); + return 0; +} +late_initcall(zii_vf610_dev_set_hostname); diff --git a/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/boot/sd b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/boot/sd new file mode 100644 index 0000000..cf8eec3 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/boot/sd @@ -0,0 +1,4 @@ +#!/bin/sh + +global.bootm.image=/mnt/sd/zImage +global.bootm.oftree=/mnt/sd/${global.bootm.oftree} diff --git a/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/automount-sd b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/automount-sd new file mode 100644 index 0000000..f44dab3 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/automount-sd @@ -0,0 +1,13 @@ +#!/bin/sh + +if [ x${global.hostname} = xdev-rev-b -o x${global.hostname} = xdev-rev-c ]; +then + global sd=0 +else + global sd=1 +fi + +mkdir -p /mnt/sd +automount /mnt/sd 'mci${global.sd}.probe=1 && mount /dev/disk${global.sd}.0 /mnt/sd' + +exit 0 diff --git a/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/choose-dtb b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/choose-dtb new file mode 100644 index 0000000..41a74c3 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/init/choose-dtb @@ -0,0 +1,4 @@ +#!/bin/sh + +global.bootm.oftree=vf610-zii-${global.hostname}.dtb + diff --git a/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg b/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg new file mode 100644 index 0000000..177f4e8 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg @@ -0,0 +1,243 @@ +soc vf610 +loadaddr 0x80000000 +dcdofs 0x400 + +#define VF610_DDR_PAD_CTRL 0x00000180 /* 25 Ohm drive strength */ +#define VF610_DDR_PAD_CTRL_1 0x00010180 /* 25 Ohm drive strength + differential input */ + +#define DDRMC_PHY_DQ_TIMING 0x00002613 +#define DDRMC_PHY_DQS_TIMING 0x00002615 +#define DDRMC_PHY_CTRL 0x00210000 +#define DDRMC_PHY_MASTER_CTRL 0x0001012a +#define DDRMC_PHY_SLAVE_CTRL 0x00002000 +#define DDRMC_PHY_OFF 0x00000000 +#define DDRMC_PHY_PROC_PAD_ODT 0x00010101 + +#define CHECKPOINT(n) wm 32 0x3f000000 n + +CHECKPOINT(1) + +/* ======================= Clock initialization =======================*/ + +/* + * Ungate all IP block clocks + */ +wm 32 0x4006b040 0xffffffff +wm 32 0x4006b044 0xffffffff +wm 32 0x4006b048 0xffffffff +wm 32 0x4006b04c 0xffffffff +wm 32 0x4006b050 0xffffffff +wm 32 0x4006b058 0xffffffff +wm 32 0x4006b05c 0xffffffff +wm 32 0x4006b060 0xffffffff +wm 32 0x4006b064 0xffffffff +wm 32 0x4006b068 0xffffffff +wm 32 0x4006b06c 0xffffffff + + +/* + * Turn PLL2 on + */ +wm 32 0x40050030 0x00002001 /* Fout = Fin * 22 */ + +CHECKPOINT(2) + +/* + * Wait for PLLs to lock + */ +check 32 while_any_bit_clear 0x40050030 0x80000000 + + +CHECKPOINT(3) + +clear_bits 32 0x4006b008 0x00000040 +set_bits 32 0x4006b008 0x00002000 + + + +/* ======================= DDR IOMUX =======================*/ + +CHECKPOINT(4) + +wm 32 0x40048220 0x00000180 +wm 32 0x40048224 0x00000180 +wm 32 0x40048228 0x00000180 +wm 32 0x4004822c 0x00000180 +wm 32 0x40048230 0x00000180 +wm 32 0x40048234 0x00000180 +wm 32 0x40048238 0x00000180 +wm 32 0x4004823c 0x00000180 +wm 32 0x40048240 0x00000180 +wm 32 0x40048244 0x00000180 +wm 32 0x40048248 0x00000180 +wm 32 0x4004824c 0x00000180 +wm 32 0x40048250 0x00000180 +wm 32 0x40048254 0x00000180 +wm 32 0x40048258 0x00000180 +wm 32 0x4004825c 0x00000180 +wm 32 0x40048260 0x00000180 +wm 32 0x40048264 0x00000180 +wm 32 0x40048268 0x00000180 +wm 32 0x4004826c 0x00000180 +wm 32 0x40048270 0x00000180 +wm 32 0x40048274 0x00000180 +wm 32 0x40048278 0x00000180 +wm 32 0x4004827c 0x00010180 +wm 32 0x40048280 0x00010180 +wm 32 0x40048284 0x00010180 +wm 32 0x40048288 0x00010180 +wm 32 0x4004828c 0x00010180 +wm 32 0x40048290 0x00010180 +wm 32 0x40048294 0x00010180 +wm 32 0x40048298 0x00010180 +wm 32 0x4004829c 0x00010180 +wm 32 0x400482a0 0x00010180 +wm 32 0x400482a4 0x00010180 +wm 32 0x400482a8 0x00010180 +wm 32 0x400482ac 0x00010180 +wm 32 0x400482b0 0x00010180 +wm 32 0x400482b4 0x00010180 +wm 32 0x400482b8 0x00010180 +wm 32 0x400482bc 0x00010180 +wm 32 0x400482c0 0x00010180 +wm 32 0x400482c4 0x00010180 +wm 32 0x400482c8 0x00010180 +wm 32 0x400482cc 0x00000180 +wm 32 0x400482d0 0x00000180 +wm 32 0x400482d4 0x00000180 +wm 32 0x400482d8 0x00000180 +wm 32 0x4004821c 0x00000180 + +/* ======================= DDR Controller =======================*/ + +CHECKPOINT(5) +wm 32 0x400ae000 0x00000600 +wm 32 0x400ae008 0x00000005 +wm 32 0x400ae028 0x00013880 +wm 32 0x400ae02c 0x00030d40 +wm 32 0x400ae030 0x00000506 +wm 32 0x400ae034 0x06040400 +wm 32 0x400ae038 0x1006040e +wm 32 0x400ae040 0x04040000 +wm 32 0x400ae044 0x006db00c +wm 32 0x400ae048 0x00000403 +wm 32 0x400ae050 0x01000000 +wm 32 0x400ae054 0x00060001 +wm 32 0x400ae058 0x000c0000 +wm 32 0x400ae05c 0x03000200 +wm 32 0x400ae060 0x00000006 +wm 32 0x400ae064 0x00010000 +wm 32 0x400ae068 0x0c300068 +wm 32 0x400ae070 0x00000000 +wm 32 0x400ae074 0x00000003 +wm 32 0x400ae078 0x0000000a +wm 32 0x400ae07c 0x006c0200 +wm 32 0x400ae084 0x00010000 +wm 32 0x400ae088 0x00050500 +wm 32 0x400ae098 0x00000000 +wm 32 0x400ae09c 0x04001002 +wm 32 0x400ae0a4 0x00000001 +wm 32 0x400ae0c0 0x00460420 +wm 32 0x400ae0c4 0x00000000 +wm 32 0x400ae0cc 0x00000000 +wm 32 0x400ae0e4 0x02000000 +wm 32 0x400ae108 0x01000200 +wm 32 0x400ae10c 0x00000040 +wm 32 0x400ae114 0x00000200 +wm 32 0x400ae118 0x00000040 +wm 32 0x400ae120 0x00000000 +wm 32 0x400ae124 0x0a010100 +wm 32 0x400ae128 0x01014040 +wm 32 0x400ae12c 0x01010101 +wm 32 0x400ae130 0x03030000 +wm 32 0x400ae134 0x01000101 +wm 32 0x400ae138 0x0700000c +wm 32 0x400ae13c 0x00000000 +wm 32 0x400ae148 0x10000000 +wm 32 0x400ae15c 0x01000000 +wm 32 0x400ae160 0x00040000 +wm 32 0x400ae164 0x00000002 +wm 32 0x400ae16c 0x00020000 +wm 32 0x400ae180 0x00002819 +wm 32 0x400ae184 0x01000000 +wm 32 0x400ae188 0x00000000 +wm 32 0x400ae18c 0x00000000 +wm 32 0x400ae198 0x00000000 +wm 32 0x400ae1a4 0x00000c00 +wm 32 0x400ae1a8 0x00000000 +wm 32 0x400ae1b8 0x0000000c +wm 32 0x400ae1c8 0x00000000 +wm 32 0x400ae1cc 0x00000000 +wm 32 0x400ae1d4 0x00000000 +wm 32 0x400ae1d8 0x01010000 +wm 32 0x400ae1e0 0x02020000 +wm 32 0x400ae1e4 0x00000202 +wm 32 0x400ae1e8 0x01010064 +wm 32 0x400ae1ec 0x00010101 +wm 32 0x400ae1f0 0x00000064 +wm 32 0x400ae1f8 0x00000800 +wm 32 0x400ae210 0x00000506 +wm 32 0x400ae224 0x00020000 +wm 32 0x400ae228 0x01000000 +wm 32 0x400ae22c 0x04070303 +wm 32 0x400ae230 0x00000040 +wm 32 0x400ae23c 0x06000080 +wm 32 0x400ae240 0x04070303 +wm 32 0x400ae244 0x00000040 +wm 32 0x400ae248 0x00000040 +wm 32 0x400ae24c 0x000f0000 +wm 32 0x400ae250 0x000f0000 +wm 32 0x400ae25c 0x00000101 +wm 32 0x400ae268 0x682c4000 +wm 32 0x400ae26c 0x00000012 +wm 32 0x400ae278 0x00000006 +wm 32 0x400ae284 0x00010202 + +/* ======================= DDR PHY =======================*/ + +CHECKPOINT(6) + +wm 32 0x400ae400 0x00002613 +wm 32 0x400ae440 0x00002613 +wm 32 0x400ae480 0x00002613 +wm 32 0x400ae404 0x00002615 +wm 32 0x400ae444 0x00002615 +wm 32 0x400ae408 0x00210000 +wm 32 0x400ae448 0x00210000 +wm 32 0x400ae488 0x00210000 +wm 32 0x400ae40c 0x0001012a +wm 32 0x400ae44c 0x0001012a +wm 32 0x400ae48c 0x0001012a +wm 32 0x400ae410 0x00002000 +wm 32 0x400ae450 0x00002000 +wm 32 0x400ae490 0x00002000 +wm 32 0x400ae4c4 0x00000000 +wm 32 0x400ae4c8 0x00001100 +wm 32 0x400ae4d0 0x00010101 +wm 32 0x400ae000 0x00000601 + +CHECKPOINT(7) + +check 32 while_any_bit_clear 0x400ae140 0x100 +# check 32 while_any_bit_clear 0x400ae42c 0x1 +# check 32 while_any_bit_clear 0x400ae46c 0x1 +# check 32 while_any_bit_clear 0x400ae4ac 0x1 + +CHECKPOINT(8) + +wm 32 0x80000000 0xa5a5a5a5 +check 32 while_any_bit_clear 0x80000000 0xa5a5a5a5 + +wm 32 0x400ae000 0x00000600 +wm 32 0x400ae000 0x00000601 + +check 32 while_any_bit_clear 0x400ae140 0x100 +# check 32 while_any_bit_clear 0x400ae42c 0x1 +# check 32 while_any_bit_clear 0x400ae46c 0x1 +# check 32 while_any_bit_clear 0x400ae4ac 0x1 + +/* wm 32 0x3f040000 0xf0 + check 32 while_any_bit_clear 0x3f040000 0x0f */ + + +CHECKPOINT(9) diff --git a/arch/arm/boards/zii-vf610-dev/lowlevel.c b/arch/arm/boards/zii-vf610-dev/lowlevel.c new file mode 100644 index 0000000..95b68d5 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/lowlevel.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2016 Zodiac Inflight Innovation + * Author: Andrey Smirnov + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline void setup_uart(void) +{ + void __iomem *iomux = IOMEM(VF610_IOMUXC_BASE_ADDR); + + vf610_ungate_all_peripherals(); + vf610_setup_pad(iomux, VF610_PAD_PTB10__UART0_TX); + vf610_uart_setup_ll(); + + putc_ll('>'); +} + +enum zii_platform_vf610_type { + ZII_PLATFORM_VF610_DEV_REV_B = 0x01, + ZII_PLATFORM_VF610_SCU4_AIB = 0x02, + ZII_PLATFORM_VF610_SPU3 = 0x03, + ZII_PLATFORM_VF610_CFU1 = 0x04, + ZII_PLATFORM_VF610_DEV_REV_C = 0x05, +}; + +unsigned int get_system_type(void) +{ +#define GPIO_PDIR 0x10 + + u32 pdir; + void __iomem *gpio2 = IOMEM(VF610_GPIO2_BASE_ADDR); + void __iomem *iomux = IOMEM(VF610_IOMUXC_BASE_ADDR); + unsigned low, high; + + /* + * System type is encoded as a 4-bit number specified by the + * following pins (pulled up or down with resistors on the + * board). + */ + vf610_setup_pad(iomux, VF610_PAD_PTD16__GPIO_78); + vf610_setup_pad(iomux, VF610_PAD_PTD17__GPIO_77); + vf610_setup_pad(iomux, VF610_PAD_PTD18__GPIO_76); + vf610_setup_pad(iomux, VF610_PAD_PTD19__GPIO_75); + + pdir = readl(gpio2 + GPIO_PDIR); + + low = 75 % 32; + high = 78 % 32; + + pdir &= GENMASK(high, low); + pdir >>= low; + + return pdir; +} + +extern char __dtb_vf610_zii_dev_rev_b_start[]; +extern char __dtb_vf610_zii_dev_rev_c_start[]; +extern char __dtb_vf610_zii_cfu1_rev_a_start[]; +extern char __dtb_vf610_zii_spu3_rev_a_start[]; +extern char __dtb_vf610_zii_scu4_aib_rev_c_start[]; + +ENTRY_FUNCTION(start_zii_vf610_dev, r0, r1, r2) +{ + void *fdt; + const unsigned int system_type = get_system_type(); + + vf610_cpu_lowlevel_init(); + + if (IS_ENABLED(CONFIG_DEBUG_LL)) + setup_uart(); + + switch (system_type) { + default: + /* + * GCC can be smart enough to, when DEBUG_LL is + * disabled, reduce this switch statement to a LUT + * fetch. Unfortunately here, this early in the boot + * process before any relocation/address fixups could + * happen, the address of that LUT used by the code is + * incorrect and any access to it would result in + * bogus values. + * + * Adding the following barrier() statement seem to + * force the compiler to always translate this block + * to a sequence of consecutive checks and jumps with + * relative fetches, which should work with or without + * relocation/fixups. + */ + barrier(); + + if (IS_ENABLED(CONFIG_DEBUG_LL)) { + relocate_to_current_adr(); + setup_c(); + puts_ll("*********************************\n"); + puts_ll("* Unknown system type: "); + puthex_ll(system_type); + puts_ll("\n* Assuming devboard revision B\n"); + puts_ll("*********************************\n"); + } + case ZII_PLATFORM_VF610_DEV_REV_B: /* FALLTHROUGH */ + fdt = __dtb_vf610_zii_dev_rev_b_start; + break; + case ZII_PLATFORM_VF610_SCU4_AIB: + fdt = __dtb_vf610_zii_scu4_aib_rev_c_start; + break; + case ZII_PLATFORM_VF610_DEV_REV_C: + fdt = __dtb_vf610_zii_dev_rev_c_start; + break; + case ZII_PLATFORM_VF610_CFU1: + fdt = __dtb_vf610_zii_cfu1_rev_a_start; + break; + case ZII_PLATFORM_VF610_SPU3: + fdt = __dtb_vf610_zii_spu3_rev_a_start; + break; + } + + barebox_arm_entry(0x80000000, SZ_512M, fdt - get_runtime_offset()); +} diff --git a/arch/arm/configs/zii_vf610_dev_defconfig b/arch/arm/configs/zii_vf610_dev_defconfig new file mode 100644 index 0000000..bda6044 --- /dev/null +++ b/arch/arm/configs/zii_vf610_dev_defconfig @@ -0,0 +1,165 @@ +CONFIG_ARCH_IMX=y +CONFIG_IMX_MULTI_BOARDS=y +CONFIG_MACH_SABRESD=y +CONFIG_MACH_ZII_VF610_DEV=y +CONFIG_IMX_IIM=y +CONFIG_IMX_IIM_FUSE_BLOW=y +CONFIG_THUMB2_BAREBOX=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_ARM_UNWIND=y +CONFIG_MMU=y +CONFIG_TEXT_BASE=0x0 +CONFIG_MALLOC_SIZE=0x0 +CONFIG_MALLOC_TLSF=y +CONFIG_KALLSYMS=y +CONFIG_RELOCATABLE=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_MENU=y +CONFIG_BOOTM_SHOW_TYPE=y +CONFIG_BOOTM_VERBOSE=y +CONFIG_BOOTM_INITRD=y +CONFIG_BOOTM_OFTREE=y +CONFIG_BOOTM_OFTREE_UIMAGE=y +CONFIG_BLSPEC=y +CONFIG_PARTITION_DISK_EFI=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y +CONFIG_RESET_SOURCE=y +CONFIG_CMD_DMESG=y +CONFIG_LONGHELP=y +CONFIG_CMD_IOMEM=y +CONFIG_CMD_IMD=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_ARM_MMUINFO=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_MMC_EXTCSD=y +# CONFIG_CMD_BOOTU is not set +CONFIG_CMD_GO=y +CONFIG_CMD_RESET=y +CONFIG_CMD_UIMAGE=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_UBIFORMAT=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_MAGICVAR=y +CONFIG_CMD_MAGICVAR_HELP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_FILETYPE=y +CONFIG_CMD_LN=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_UNCOMPRESS=y +CONFIG_CMD_LET=y +CONFIG_CMD_MSLEEP=y +CONFIG_CMD_READF=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MIITOOL=y +CONFIG_CMD_PING=y +CONFIG_CMD_TFTP=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_MENU=y +CONFIG_CMD_MENU_MANAGEMENT=y +CONFIG_CMD_MENUTREE=y +CONFIG_CMD_SPLASH=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_CRC=y +CONFIG_CMD_CRC_CMP=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MM=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DETECT=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_LED=y +CONFIG_CMD_NANDTEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_LED_TRIGGER=y +CONFIG_CMD_USBGADGET=y +CONFIG_CMD_WD=y +CONFIG_CMD_BAREBOX_UPDATE=y +CONFIG_CMD_OF_NODE=y +CONFIG_CMD_OF_PROPERTY=y +CONFIG_CMD_OFTREE=y +CONFIG_CMD_TIME=y +CONFIG_NET=y +CONFIG_NET_NETCONSOLE=y +CONFIG_NET_RESOLV=y +CONFIG_OF_BAREBOX_DRIVERS=y +CONFIG_DRIVER_NET_FEC_IMX=y +CONFIG_AT803X_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_USB=y +CONFIG_NET_USB_ASIX=y +CONFIG_NET_USB_SMSC95XX=y +CONFIG_DRIVER_SPI_IMX=y +CONFIG_DRIVER_SPI_DSPI=y +CONFIG_I2C=y +CONFIG_I2C_IMX=y +CONFIG_MTD=y +CONFIG_MTD_RAW_DEVICE=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SST25L=y +CONFIG_NAND=y +CONFIG_NAND_ALLOW_ERASE_BAD=y +CONFIG_NAND_IMX=y +CONFIG_NAND_IMX_BBM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_DISK_AHCI=y +CONFIG_DISK_AHCI_IMX=y +CONFIG_DISK_INTF_PLATFORM_IDE=y +CONFIG_DISK_PATA_IMX=y +CONFIG_USB_HOST=y +CONFIG_USB_IMX_CHIPIDEA=y +CONFIG_USB_EHCI=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DFU=y +CONFIG_USB_GADGET_SERIAL=y +CONFIG_USB_GADGET_FASTBOOT=y +CONFIG_VIDEO=y +CONFIG_DRIVER_VIDEO_IMX_IPUV3=y +CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y +CONFIG_DRIVER_VIDEO_IMX_IPUV3_HDMI=y +CONFIG_DRIVER_VIDEO_SIMPLEFB=y +CONFIG_DRIVER_VIDEO_EDID=y +CONFIG_MCI=y +CONFIG_MCI_MMC_BOOT_PARTITIONS=y +CONFIG_MCI_IMX_ESDHC=y +CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC34704=y +CONFIG_MFD_MC9SDZ60=y +CONFIG_MFD_STMPE=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_LED_GPIO_OF=y +CONFIG_LED_TRIGGERS=y +CONFIG_EEPROM_AT25=y +CONFIG_EEPROM_AT24=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_IMX=y +CONFIG_PWM=y +CONFIG_PWM_IMX=y +CONFIG_GPIO_STMPE=y +CONFIG_GPIO_SX150X=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED=y +CONFIG_GENERIC_PHY=y +CONFIG_USB_NOP_XCEIV=y +CONFIG_FS_EXT4=y +CONFIG_FS_TFTP=y +CONFIG_FS_NFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_WRITE=y +CONFIG_FS_FAT_LFN=y +CONFIG_FS_UBIFS=y +CONFIG_FS_UBIFS_COMPRESSION_LZO=y +CONFIG_PNG=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f5fb0cd..cfb7b95 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -81,5 +81,12 @@ pbl-dtb-$(CONFIG_MACH_VARISCITE_MX6) += imx6q-var-custom.dtb.o pbl-dtb-$(CONFIG_MACH_VSCOM_BALTOS) += am335x-baltos-minimal.dtb.o pbl-dtb-$(CONFIG_MACH_VF610_TWR) += vf610-twr.dtb.o pbl-dtb-$(CONFIG_MACH_ZII_RDU2) += imx6q-zii-rdu2.dtb.o imx6qp-zii-rdu2.dtb.o +pbl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \ + vf610-zii-dev-rev-b.dtb.o \ + vf610-zii-dev-rev-c.dtb.o \ + vf610-zii-cfu1-rev-a.dtb.o \ + vf610-zii-spu3-rev-a.dtb.o \ + vf610-zii-scu4-aib-rev-c.dtb.o + clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtb.lzo diff --git a/arch/arm/dts/vf610-zii-cfu1-rev-a.dts b/arch/arm/dts/vf610-zii-cfu1-rev-a.dts new file mode 100644 index 0000000..4147d13 --- /dev/null +++ b/arch/arm/dts/vf610-zii-cfu1-rev-a.dts @@ -0,0 +1,208 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + + + +/dts-v1/; +#include "vf610-zii-dev.dtsi" + +/ { + model = "ZII VF610 CFU1 Switch Management Board"; + compatible = "zii,vf610cfu1-a", "zii,vf610dev", "fsl,vf610"; + + aliases { + /delete-property/ serial1; + /delete-property/ serial2; + }; + + gpio-leds { + debug { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + }; + + fail { + label = "zii_fail"; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + max-brightness = <1>; + }; + + status { + label = "zii_status"; + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + status_a { + label = "zii_status_a"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + status_b { + label = "zii_status_b"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; + max-brightness = <1>; + }; + }; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + status = "okay"; +}; + +&fec0 { + status = "disabled"; +}; + +&i2c0 { + clock-frequency = <400000>; + + pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +/delete-node/ &i2c1; +/delete-node/ &i2c2; +/delete-node/ &uart1; +/delete-node/ &uart2; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 /* SOC_SW_RSTn */ + VF610_PAD_PTB28__GPIO_98 0x31c1 /* E6352_INTn */ + + /* PTE27 is wired to signal SD on part CONN + * SFF-F4 via net FIM_DS. An active high + * on this indicates a received optical + * signal + + * SPEED=0b11 HIGH, SRE=0b0, ODE=0b0, HYS=0b0 + * DSE=0b001 150Ohm, PUS=0b10 100k UP + * PKE=0b0, PUE=0b0, OBE=0b0, IBE=0b1 + */ + VF610_PAD_PTE27__GPIO_132 0x3061 + + /* + * PTE13 is wired to signal T_DIS on part CONN + * SFF-F4 via net FIM_TDIS. Setting this high + * will disable optical output from the SFF-F4 + + * SPEED=0b11 HIGH, SRE=0b0, ODE=0b0, HYS=0b0 + * DSE=0b001 150Ohm, PUS=0b00 100k DOWN + * PKE=0b0, PUE=0b0, OBE=0b1, IBE=0b1 + * TODO: probably want IBE=0b0 + */ + VF610_PAD_PTE13__GPIO_118 0x3043 + >; + }; + + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + VF610_PAD_PTE3__GPIO_108 0x31c2 + VF610_PAD_PTE4__GPIO_109 0x31c2 + VF610_PAD_PTE5__GPIO_110 0x31c2 + VF610_PAD_PTE6__GPIO_111 0x31c2 + >; + }; +}; diff --git a/arch/arm/dts/vf610-zii-dev-rev-b.dts b/arch/arm/dts/vf610-zii-dev-rev-b.dts new file mode 100644 index 0000000..bf0a010 --- /dev/null +++ b/arch/arm/dts/vf610-zii-dev-rev-b.dts @@ -0,0 +1,431 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "vf610-zii-dev.dtsi" + +/* + * ============================================================= + * The following code is shared with Linux kernel and should be + * removed once it trickles down from there eventually + * ============================================================= + */ + +/ { + model = "ZII VF610 Development Board, Rev B"; + compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH + &gpio0 9 GPIO_ACTIVE_HIGH + &gpio0 24 GPIO_ACTIVE_HIGH + &gpio0 25 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + switch0port5: port@5 { + reg = <5>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port6 + &switch2port9>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch1@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan3"; + phy-handle = <&switch1phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <2>; + label = "lan5"; + phy-handle = <&switch1phy2>; + }; + + switch1port5: port@5 { + reg = <5>; + label = "dsa"; + link = <&switch2port9>; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch1port6: port@6 { + reg = <6>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + }; + }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + }; + switch1phy1: switch1phy0@1 { + reg = <1>; + }; + switch1phy2: switch1phy0@2 { + reg = <2>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + switch2: switch2@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan6"; + }; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan8"; + }; + + port@3 { + reg = <3>; + label = "optical3"; + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 2 + GPIO_ACTIVE_HIGH>; + }; + }; + + port@4 { + reg = <4>; + label = "optical4"; + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 3 + GPIO_ACTIVE_HIGH>; + }; + }; + + switch2port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port5 + &switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + + mdio_mux_8: mdio@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + spi0 { + compatible = "spi-gpio"; + pinctrl-0 = <&pinctrl_gpio_spi0>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH + &gpio1 8 GPIO_ACTIVE_HIGH>; + num-chipselects = <2>; + + m25p128@0 { + compatible = "m25p128", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + at93c46d@1 { + compatible = "atmel,at93c46d"; + pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>; + pinctrl-names = "default"; + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <500000>; + spi-cs-high; + data-size = <16>; + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio5: pca9554@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + }; + + gpio6: pca9554@22 { + compatible = "nxp,pca9554"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9554_22>; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-0 = <&pinctrl_i2c_mux_reset>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sfp1: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sfp2: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sfp3: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + sfp4: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + }; +}; + + +&iomuxc { + pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { + fsl,pins = < + VF610_PAD_PTE27__GPIO_132 0x33e2 + >; + }; + + pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + fsl,pins = < + VF610_PAD_PTB22__GPIO_44 0x33e2 + VF610_PAD_PTB21__GPIO_43 0x33e2 + VF610_PAD_PTB20__GPIO_42 0x33e1 + VF610_PAD_PTB19__GPIO_41 0x33e2 + VF610_PAD_PTB18__GPIO_40 0x33e2 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x31c2 + VF610_PAD_PTA19__GPIO_9 0x31c2 + VF610_PAD_PTB2__GPIO_24 0x31c2 + VF610_PAD_PTB3__GPIO_25 0x31c2 + >; + }; + + pinctrl_pca9554_22: pinctrl-pca95540-22 { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; +}; + +/* + * ============================================================= + * End of shared part + * ============================================================= +*/ diff --git a/arch/arm/dts/vf610-zii-dev-rev-c.dts b/arch/arm/dts/vf610-zii-dev-rev-c.dts new file mode 100644 index 0000000..5228942 --- /dev/null +++ b/arch/arm/dts/vf610-zii-dev-rev-c.dts @@ -0,0 +1,445 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "vf610-zii-dev.dtsi" + +/* + * ============================================================= + * The following code is shared with Linux kernel and should be + * removed once it trickles down from there eventually + * ============================================================= + */ + +/ { + model = "ZII VF610 Development Board, Rev C"; + compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610"; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH + &gpio0 9 GPIO_ACTIVE_HIGH + &gpio0 25 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10>; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch1@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan7"; + }; + + port@4 { + reg = <4>; + label = "lan8"; + }; + + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&dspi0 { + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + status = "okay"; + spi-num-chipselects = <2>; + + m25p128@0 { + compatible = "m25p128", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <50000000>; + }; + + atzb-rf-233@1 { + compatible = "atmel,at86rf233"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctr_atzb_rf_233>; + + spi-max-frequency = <7500000>; + reg = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio3>; + xtal-trim = /bits/ 8 <0x06>; + + sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + fsl,spi-cs-sck-delay = <180>; + fsl,spi-sck-cs-delay = <250>; + }; +}; + +&dspi2 { + bus-num = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi2>; + status = "okay"; + spi-num-chipselects = <2>; +}; + +&i2c0 { + /* + * U712 + * + * Exposed signals: + * P1 - WE2_CMD + * P2 - WE2_CLK + */ + gpio5: pca9557@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * U121 + * + * Exposed signals: + * I/O0 - ENET_SWR_EN + * I/O1 - ESW1_RESETn + * I/O2 - ARINC_RESET + * I/O3 - DD1_IO_RESET + * I/O4 - ESW2_RESETn + * I/O5 - ESW3_RESETn + * I/O6 - ESW4_RESETn + * I/O8 - TP909 + * I/O9 - FEM_SEL + * I/O10 - WIFI_RESETn + * I/O11 - PHY_RSTn + * I/O12 - OPT1_SD + * I/O13 - OPT2_SD + * I/O14 - OPT1_TX_DIS + * I/O15 - OPT2_TX_DIS + */ + gpio6: sx1503@20 { + compatible = "semtech,sx1503q"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + interrupt-controller; + + enet_swr_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "enet-swr-en"; + }; + }; + + /* + * U715 + * + * Exposed signals: + * IO0 - WE1_CLK + * IO1 - WE1_CMD + */ + gpio7: pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + }; +}; + +&i2c1 { + at24mac602@00 { + compatible = "atmel,24c02"; + reg = <0x50>; + read-only; + }; +}; + +&i2c2 { + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-0 = <&pinctrl_i2c_mux_reset>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sfp2: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sfp3: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&gpio0 { + eth0_intrp { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + input; + line-name = "sx1503-irq"; + }; +}; + +&gpio3 { + eth0_intrp { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + input; + line-name = "eth0-intrp"; + }; +}; + +&fec0 { + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0_phy_int>; + + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; +}; + +&iomuxc { + pinctr_atzb_rf_233: pinctrl-atzb-rf-233 { + fsl,pins = < + VF610_PAD_PTB2__GPIO_24 0x31c2 + VF610_PAD_PTE27__GPIO_132 0x33e2 + >; + }; + + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTB1__GPIO_23 0x219d + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x31c2 + VF610_PAD_PTA19__GPIO_9 0x31c2 + VF610_PAD_PTB3__GPIO_25 0x31c2 + >; + }; + + pinctrl_fec0_phy_int: pinctrl-fec0-phy-int { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; +}; + +/* + * ============================================================= + * End of shared part + * ============================================================= + */ + + +&dspi0 { + m25p128@0 { + partition@0 { + label = "bootloader"; + reg = <0x0 0x100000>; + }; + }; +}; diff --git a/arch/arm/dts/vf610-zii-dev.dtsi b/arch/arm/dts/vf610-zii-dev.dtsi new file mode 100644 index 0000000..dae077c --- /dev/null +++ b/arch/arm/dts/vf610-zii-dev.dtsi @@ -0,0 +1,436 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use +n * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + + +/* + * ============================================================= + * The following code is shared with Linux kernel and should be + * removed once it trickles down from there eventually + * ============================================================= + */ + +#include + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_usb_vbus>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 6 0>; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + vbus-supply = <&usb0_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0x00a1 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2grp { + fsl,pins = < + VF610_PAD_PTD31__DSPI2_CS1 0x1182 + VF610_PAD_PTD30__DSPI2_CS0 0x1182 + VF610_PAD_PTD29__DSPI2_SIN 0x1181 + VF610_PAD_PTD28__DSPI2_SOUT 0x1182 + VF610_PAD_PTD27__DSPI2_SCK 0x1182 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + fsl,pins = < + VF610_PAD_PTB22__GPIO_44 0x33e2 + VF610_PAD_PTB21__GPIO_43 0x33e2 + VF610_PAD_PTB20__GPIO_42 0x33e1 + VF610_PAD_PTB19__GPIO_41 0x33e2 + VF610_PAD_PTB18__GPIO_40 0x33e2 + >; + }; + + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + fsl,pins = < + VF610_PAD_PTE14__GPIO_119 0x31c2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c0_gpio: i2c0grp-gpio { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x31c2 + VF610_PAD_PTB15__GPIO_37 0x31c2 + >; + }; + + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD20__GPIO_74 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_usb_vbus: pinctrl-usb-vbus { + fsl,pins = < + VF610_PAD_PTA16__GPIO_6 0x31c2 + >; + }; + + pinctrl_usb0_host: usb0-host-grp { + fsl,pins = < + VF610_PAD_PTD6__GPIO_85 0x0062 + >; + }; +}; + +/* + * ============================================================= + * End of shared part + * ============================================================= + */ + +/ { + audio_ext: mclk_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + enet_ext: eth_osc { + compatible = "fixed-clock"; + clock-output-names = "enet_ext"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + anaclk1: anaclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; + +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>, <&anaclk1>, + <&clks VF610_CLK_SYS_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_DDRMC>; + clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext", "anaclk1", + "cpu", "bus", "ipg", "ddr"; + + assigned-clocks = <&clks VF610_CLK_ENET_SEL>, + <&clks VF610_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>, + <&clks VF610_CLK_ENET_EXT>; +}; + +&ocotp { + barebox,provide-mac-address = <&fec0 0x620>, + <&fec1 0x640>; +}; diff --git a/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts b/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts new file mode 100644 index 0000000..d10f460 --- /dev/null +++ b/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts @@ -0,0 +1,457 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "vf610-zii-dev.dtsi" + +/ { + model = "ZII VF610 SCU4 AIB, Rev C"; + compatible = "zii,vf610scu4-aib-c", "zii,vf610dev", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200n8"; + }; + + gpio-leds { + debug { + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + }; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH + &gpio4 5 GPIO_ACTIVE_HIGH + &gpio3 30 GPIO_ACTIVE_HIGH + &gpio3 31 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio_mux_8: mdio@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-0 = <&pinctrl_dspi2>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio2 3 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio2 2 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio2 1 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + at93c46d@0 { + compatible = "atmel,at93c46d"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0>; + spi-max-frequency = <500000>; + spi-cs-high; + data-size = <16>; + select-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&dspi0 { + pinctrl-0 = <&pinctrl_dspi0>, <&pinctrl_dspi0_cs_4_5>; + pinctrl-names = "default"; + status = "okay"; +}; + +&dspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; + + m25p128@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-1"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + status = "okay"; +}; + +&fec0 { + status = "disabled"; +}; + +&i2c0 { + /* Reset Signals */ + gpio5: pca9505@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* Board Revision */ + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c1 { + /* Wireless 2 */ + gpio8: pca9554@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* Wireless 1 */ + gpio7: pca9554@24 { + compatible = "nxp,pca9554"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* AIB voltage monitor */ + adt7411@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; +}; + +&i2c2 { + /* FIB voltage monitor */ + adt7411@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; + + lm75_swb { + compatible = "national,lm75"; + reg = <0x4e>; + }; + + lm75_swa { + compatible = "national,lm75"; + reg = <0x4f>; + }; + + /* FIB Nameplate */ + at24c08@57 { + compatible = "atmel,24c08"; + reg = <0x57>; + }; + + tca9548@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sff0: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sff1: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + sff2: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + sff3: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + sff4: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + }; + + + tca9548@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sff5: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sff6: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + sff7: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + sff8: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + sff9: at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + }; +}; + +&uart1 { + linux,rs485-enabled-at-boot-time; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_rts>; +}; + +&uart2 { + linux,rs485-enabled-at-boot-time; + pinctrl-0 = <&pinctrl_uart2>, <&pinctrl_uart2_rts>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpo_public>; + + + pinctrl_gpo_public: gpopubgrp { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x2062 + VF610_PAD_PTE3__GPIO_108 0x2062 + VF610_PAD_PTE4__GPIO_109 0x2062 + VF610_PAD_PTE5__GPIO_110 0x2062 + VF610_PAD_PTE6__GPIO_111 0x2062 + >; + }; + + pinctrl_dspi0_cs_4_5: dspi0grp-cs-4-5 { + fsl,pins = < + VF610_PAD_PTB13__DSPI0_CS4 0x1182 + VF610_PAD_PTB12__DSPI0_CS5 0x1182 + >; + }; + + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + VF610_PAD_PTA30__I2C3_SCL 0x37ff + VF610_PAD_PTA31__I2C3_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTB26__GPIO_96 0x31c2 + >; + }; + + pinctrl_uart1_rts: uart1grp-rts { + fsl,pins = < + VF610_PAD_PTB25__UART1_RTS 0x2062 + >; + }; + + pinctrl_uart2_rts: uart2grp-rts { + fsl,pins = < + VF610_PAD_PTD2__UART2_RTS 0x2062 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTE27__GPIO_132 0x31c2 + VF610_PAD_PTE28__GPIO_133 0x31c2 + VF610_PAD_PTE21__GPIO_126 0x31c2 + VF610_PAD_PTE22__GPIO_127 0x31c2 + >; + }; +}; diff --git a/arch/arm/dts/vf610-zii-spu3-rev-a.dts b/arch/arm/dts/vf610-zii-spu3-rev-a.dts new file mode 100644 index 0000000..25ab26d --- /dev/null +++ b/arch/arm/dts/vf610-zii-spu3-rev-a.dts @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610-zii-dev.dtsi" + + +/ { + model = "ZII VF610 SPU3 Switch Management Board"; + compatible = "zii,vf610spu3-a", "zii,vf610dev", "fsl,vf610"; + + aliases { + /delete-property/ serial2; + }; + + gpio-leds { + debug { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + status = "okay"; +}; + +&fec0 { + status = "disabled"; +}; + +&i2c0 { + /* Board Revision */ + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +/delete-node/ &i2c1; +/delete-node/ &i2c2; +/delete-node/ &uart2; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 62e6494..dba1041 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -355,6 +355,11 @@ config MACH_ZII_RDU2 bool "ZII i.MX6Q(+) RDU2" select ARCH_IMX6 +config MACH_ZII_VF610_DEV + bool "Zodiac VF610 Dev Family" + select ARCH_VF610 + select CLKDEV_LOOKUP + endif # ---------------------------------------------------------- diff --git a/images/Makefile.imx b/images/Makefile.imx index eba6048..b0c4694 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -423,3 +423,8 @@ pblx-$(CONFIG_MACH_ZII_RDU2) += start_imx6qp_zii_rdu2 CFG_start_imx6qp_zii_rdu2.pblx.imximg = $(board)/zii-imx6q-rdu2/flash-header-imx6qp-rdu2.imxcfg FILE_barebox-zii-imx6qp-rdu2.img = start_imx6qp_zii_rdu2.pblx.imximg image-$(CONFIG_MACH_ZII_RDU2) += barebox-zii-imx6qp-rdu2.img + +pblx-$(CONFIG_MACH_ZII_VF610_DEV) += start_zii_vf610_dev +CFG_start_zii_vf610_dev.pblx.imximg = $(board)/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg +FILE_barebox-zii-vf610-dev.img = start_zii_vf610_dev.pblx.imximg +image-$(CONFIG_MACH_ZII_VF610_DEV) += barebox-zii-vf610-dev.img -- 2.9.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox