From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1chGon-0005Rj-Qi for barebox@lists.infradead.org; Fri, 24 Feb 2017 14:26:02 +0000 From: Bastian Stender Date: Fri, 24 Feb 2017 15:25:01 +0100 Message-Id: <20170224142501.2679-5-bst@pengutronix.de> In-Reply-To: <20170224142501.2679-1-bst@pengutronix.de> References: <20170224142501.2679-1-bst@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family To: barebox@lists.infradead.org Cc: Bastian Stender It was ported from linux v4.10. Like the kernel driver only communication via I2C is supported. It has only been tested with a SSD1306 and a 96x16 OLED display: &i2c0 { status = "okay"; ssd1306: oled@3c { compatible = "solomon,ssd1306fb-i2c"; reg = <0x3c>; reset-gpios = <&gpio1 1 0>; solomon,height = <16>; solomon,width = <96>; solomon,page-offset = <0>; solomon,com-invdir; solomon,com-seq; }; Signed-off-by: Bastian Stender --- drivers/video/Kconfig | 4 + drivers/video/Makefile | 1 + drivers/video/ssd1307fb.c | 569 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 574 insertions(+) create mode 100644 drivers/video/ssd1307fb.c diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8f31f5af74..50a876acb1 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -12,6 +12,10 @@ config FRAMEBUFFER_CONSOLE select FONTS prompt "framebuffer console support" +config DRIVER_VIDEO_FB_SSD1307 + bool "Solomon SSD1307 framebuffer support" + depends on PWM && I2C && GPIOLIB + config VIDEO_VPL depends on OFTREE bool diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 1bf2e1f3ca..e23c9c37b6 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_DRIVER_VIDEO_OMAP) += omap.o obj-$(CONFIG_DRIVER_VIDEO_BCM283X) += bcm2835.o obj-$(CONFIG_DRIVER_VIDEO_SIMPLEFB) += simplefb.o obj-$(CONFIG_DRIVER_VIDEO_IMX_IPUV3) += imx-ipu-v3/ +obj-$(CONFIG_DRIVER_VIDEO_FB_SSD1307) += ssd1307fb.o diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c new file mode 100644 index 0000000000..0dfdcc2232 --- /dev/null +++ b/drivers/video/ssd1307fb.c @@ -0,0 +1,569 @@ +/* + * Driver for the Solomon SSD1307 OLED controller family + * + * Supports: + * - SSD1305 (untested) + * - SSD1306 + * - SSD1307 (untested) + * - SSD1309 (untested) + * + * Copyright 2012 Maxime Ripard , Free Electrons + * + * Ported to barebox from linux v4.10 + * Copyright (C) 2017 Pengutronix, Bastian Stender + * + * Licensed under the GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SSD1307FB_DATA 0x40 +#define SSD1307FB_COMMAND 0x80 + +#define SSD1307FB_SET_ADDRESS_MODE 0x20 +#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00) +#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01) +#define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02) +#define SSD1307FB_SET_COL_RANGE 0x21 +#define SSD1307FB_SET_PAGE_RANGE 0x22 +#define SSD1307FB_CONTRAST 0x81 +#define SSD1307FB_CHARGE_PUMP 0x8d +#define SSD1307FB_SEG_REMAP_ON 0xa1 +#define SSD1307FB_DISPLAY_OFF 0xae +#define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8 +#define SSD1307FB_DISPLAY_ON 0xaf +#define SSD1307FB_START_PAGE_ADDRESS 0xb0 +#define SSD1307FB_SET_DISPLAY_OFFSET 0xd3 +#define SSD1307FB_SET_CLOCK_FREQ 0xd5 +#define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9 +#define SSD1307FB_SET_COM_PINS_CONFIG 0xda +#define SSD1307FB_SET_VCOMH 0xdb + +struct ssd1307fb_par; + +struct ssd1307fb_deviceinfo { + u32 default_vcomh; + u32 default_dclk_div; + u32 default_dclk_frq; + int need_chargepump; +}; + +struct ssd1307fb_par { + u32 com_invdir; + u32 com_lrremap; + u32 com_offset; + u32 com_seq; + u32 contrast; + u32 dclk_div; + u32 dclk_frq; + const struct ssd1307fb_deviceinfo *device_info; + struct i2c_client *client; + u32 height; + struct fb_info *info; + u32 page_offset; + u32 prechargep1; + u32 prechargep2; + int reset; + u32 seg_remap; + u32 vcomh; + u32 width; +}; + +struct ssd1307fb_array { + u8 type; + u8 data[0]; +}; + +static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type) +{ + struct ssd1307fb_array *array; + + array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL); + if (!array) + return NULL; + + array->type = type; + + return array; +} + +static int ssd1307fb_write_array(struct i2c_client *client, + struct ssd1307fb_array *array, u32 len) +{ + int ret; + + len += sizeof(struct ssd1307fb_array); + + ret = i2c_master_send(client, (u8 *)array, len); + if (ret != len) { + dev_err(&client->dev, "Couldn't send I2C command.\n"); + return ret; + } + + return 0; +} + +static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd) +{ + struct ssd1307fb_array *array; + int ret; + + array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND); + if (!array) + return -ENOMEM; + + array->data[0] = cmd; + + ret = ssd1307fb_write_array(client, array, 1); + kfree(array); + + return ret; +} + +static void ssd1307fb_update_display(struct ssd1307fb_par *par) +{ + struct ssd1307fb_array *array; + u8 *vmem = par->info->screen_base; + int i, j, k; + + array = ssd1307fb_alloc_array(par->width * par->height / 8, + SSD1307FB_DATA); + if (!array) + return; + + /* + * The screen is divided in pages, each having a height of 8 + * pixels, and the width of the screen. When sending a byte of + * data to the controller, it gives the 8 bits for the current + * column. I.e, the first byte are the 8 bits of the first + * column, then the 8 bits for the second column, etc. + * + * + * Representation of the screen, assuming it is 5 bits + * wide. Each letter-number combination is a bit that controls + * one pixel. + * + * A0 A1 A2 A3 A4 + * B0 B1 B2 B3 B4 + * C0 C1 C2 C3 C4 + * D0 D1 D2 D3 D4 + * E0 E1 E2 E3 E4 + * F0 F1 F2 F3 F4 + * G0 G1 G2 G3 G4 + * H0 H1 H2 H3 H4 + * + * If you want to update this screen, you need to send 5 bytes: + * (1) A0 B0 C0 D0 E0 F0 G0 H0 + * (2) A1 B1 C1 D1 E1 F1 G1 H1 + * (3) A2 B2 C2 D2 E2 F2 G2 H2 + * (4) A3 B3 C3 D3 E3 F3 G3 H3 + * (5) A4 B4 C4 D4 E4 F4 G4 H4 + */ + + for (i = 0; i < (par->height / 8); i++) { + for (j = 0; j < par->width; j++) { + u32 array_idx = i * par->width + j; + array->data[array_idx] = 0; + for (k = 0; k < 8; k++) { + u32 page_length = par->width * i * 8; + u32 index = page_length + (par->width * k + j); + u8 byte = *(vmem + index); + /* convert to 1 bit per pixel */ + u8 bit = byte > 0; + array->data[array_idx] |= bit << k; + } + } + } + + ssd1307fb_write_array(par->client, array, par->width * par->height / 8); + kfree(array); +} + +static void ssd1307fb_enable(struct fb_info *info) +{ + struct ssd1307fb_par *par = info->priv; + ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); +} + +static void ssd1307fb_disable(struct fb_info *info) +{ + struct ssd1307fb_par *par = info->priv; + ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); +} + +static void ssd1307fb_flush(struct fb_info *info) +{ + struct ssd1307fb_par *par = info->priv; + ssd1307fb_update_display(par); +} + +static struct fb_ops ssd1307fb_ops = { + .fb_enable = ssd1307fb_enable, + .fb_disable = ssd1307fb_disable, + .fb_flush = ssd1307fb_flush, +}; + +static int ssd1307fb_init(struct ssd1307fb_par *par) +{ + int ret; + u32 precharge, dclk, com_invdir, compins; + + /* Set initial contrast */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->contrast); + if (ret < 0) + return ret; + + /* Set segment re-map */ + if (par->seg_remap) { + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); + if (ret < 0) + return ret; + }; + + /* Set COM direction */ + com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3; + ret = ssd1307fb_write_cmd(par->client, com_invdir); + if (ret < 0) + return ret; + + /* Set multiplex ratio value */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->height - 1); + if (ret < 0) + return ret; + + /* set display offset value */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->com_offset); + if (ret < 0) + return ret; + + /* Set clock frequency */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ); + if (ret < 0) + return ret; + + dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4; + ret = ssd1307fb_write_cmd(par->client, dclk); + if (ret < 0) + return ret; + + /* Set precharge period in number of ticks from the internal clock */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD); + if (ret < 0) + return ret; + + precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4; + ret = ssd1307fb_write_cmd(par->client, precharge); + if (ret < 0) + return ret; + + /* Set COM pins configuration */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG); + if (ret < 0) + return ret; + + compins = 0x02 | !(par->com_seq & 0x1) << 4 + | (par->com_lrremap & 0x1) << 5; + ret = ssd1307fb_write_cmd(par->client, compins); + if (ret < 0) + return ret; + + /* Set VCOMH */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->vcomh); + if (ret < 0) + return ret; + + /* Turn on the DC-DC Charge Pump */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0)); + if (ret < 0) + return ret; + + /* Switch to horizontal addressing mode */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); + if (ret < 0) + return ret; + + /* Set column range */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x0); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, par->width - 1); + if (ret < 0) + return ret; + + /* Set page range */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, 0x0); + if (ret < 0) + return ret; + + ret = ssd1307fb_write_cmd(par->client, + par->page_offset + (par->height / 8) - 1); + if (ret < 0) + return ret; + + /* Turn on the display */ + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1305_deviceinfo = { + .default_vcomh = 0x34, + .default_dclk_div = 1, + .default_dclk_frq = 7, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = { + .default_vcomh = 0x20, + .default_dclk_div = 1, + .default_dclk_frq = 8, + .need_chargepump = 1, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = { + .default_vcomh = 0x20, + .default_dclk_div = 2, + .default_dclk_frq = 12, +}; + +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1309_deviceinfo = { + .default_vcomh = 0x34, + .default_dclk_div = 1, + .default_dclk_frq = 10, +}; + +static const struct of_device_id ssd1307fb_of_match[] = { + { + .compatible = "solomon,ssd1305fb-i2c", + .data = (void *)&ssd1307fb_ssd1305_deviceinfo, + }, + { + .compatible = "solomon,ssd1306fb-i2c", + .data = (void *)&ssd1307fb_ssd1306_deviceinfo, + }, + { + .compatible = "solomon,ssd1307fb-i2c", + .data = (void *)&ssd1307fb_ssd1307_deviceinfo, + }, + { + .compatible = "solomon,ssd1309fb-i2c", + .data = (void *)&ssd1307fb_ssd1309_deviceinfo, + }, + {}, +}; + +static int ssd1307fb_probe(struct device_d *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct fb_info *info; + struct device_node *node = dev->device_node; + const struct of_device_id *match = + of_match_node(ssd1307fb_of_match, dev->device_node); + u32 vmem_size; + struct ssd1307fb_par *par; + struct ssd1307fb_array *array; + u8 *vmem; + int ret; + int i, j; + + if (!node) { + dev_err(&client->dev, "No device tree data found!\n"); + return -EINVAL; + } + + info = xzalloc(sizeof(struct fb_info)); + if (!info) { + dev_err(&client->dev, "Couldn't allocate framebuffer.\n"); + return -ENOMEM; + } + + par = info->priv; + par->info = info; + par->client = client; + + par->device_info = (struct ssd1307fb_deviceinfo *)match->data; + + par->reset = of_get_named_gpio(node, + "reset-gpios", 0); + if (!gpio_is_valid(par->reset)) { + dev_err(&client->dev, + "Couldn't get named gpio 'reset-gpios' %d.\n", + par->reset); + ret = par->reset; + goto fb_alloc_error; + } + + if (of_property_read_u32(node, "solomon,width", &par->width)) + par->width = 96; + + if (of_property_read_u32(node, "solomon,height", &par->height)) + par->height = 16; + + if (of_property_read_u32(node, "solomon,page-offset", + &par->page_offset)) + par->page_offset = 1; + + if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset)) + par->com_offset = 0; + + if (of_property_read_u32(node, "solomon,prechargep1", + &par->prechargep1)) + par->prechargep1 = 2; + + if (of_property_read_u32(node, "solomon,prechargep2", + &par->prechargep2)) + par->prechargep2 = 2; + + par->seg_remap = !of_property_read_bool(node, + "solomon,segment-no-remap"); + par->com_seq = of_property_read_bool(node, "solomon,com-seq"); + par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap"); + par->com_invdir = of_property_read_bool(node, "solomon,com-invdir"); + + par->contrast = 127; + par->vcomh = par->device_info->default_vcomh; + + /* Setup display timing */ + par->dclk_div = par->device_info->default_dclk_div; + par->dclk_frq = par->device_info->default_dclk_frq; + + vmem_size = par->width * par->height; + + vmem = malloc(vmem_size); + if (!vmem) { + dev_err(&client->dev, "Couldn't allocate graphical memory.\n"); + ret = -ENOMEM; + goto fb_alloc_error; + } + + info->fbops = &ssd1307fb_ops; + info->line_length = par->width; + + info->xres = par->width; + info->yres = par->height; + + /* emulate 8 bit per pixel */ + info->bits_per_pixel = 8; + + info->red.length = 3; + info->red.offset = 0; + info->green.length = 3; + info->green.offset = 0; + info->blue.length = 2; + info->blue.offset = 0; + + info->screen_base = (u8 __force __iomem *)vmem; + + ret = gpio_request_one(par->reset, + GPIOF_OUT_INIT_HIGH, + "oled-reset"); + if (ret) { + dev_err(&client->dev, + "failed to request gpio %d: %d\n", + par->reset, ret); + goto reset_oled_error; + } + + i2c_set_clientdata(client, info); + + /* Reset the screen */ + gpio_set_value(par->reset, 0); + udelay(4); + gpio_set_value(par->reset, 1); + udelay(4); + + ret = ssd1307fb_init(par); + if (ret) + goto reset_oled_error; + + ret = register_framebuffer(info); + if (ret) { + dev_err(&client->dev, "Couldn't register the framebuffer\n"); + goto panel_init_error; + } + + /* clear display */ + array = ssd1307fb_alloc_array(par->width * par->height / 8, + SSD1307FB_DATA); + if (!array) + return -ENOMEM; + + for (i = 0; i < (par->height / 8); i++) { + for (j = 0; j < par->width; j++) { + u32 array_idx = i * par->width + j; + array->data[array_idx] = 0; + } + } + + ssd1307fb_write_array(par->client, array, par->width * par->height / 8); + kfree(array); + + dev_info(&client->dev, + "ssd1307 framebuffer device registered, using %d bytes of video memory\n", + vmem_size); + + return 0; + +panel_init_error: +reset_oled_error: +fb_alloc_error: + free(info); + return ret; +} + +static struct driver_d ssd1307fb_driver = { + .name = "ssd1307fb", + .probe = ssd1307fb_probe, + .of_compatible = DRV_OF_COMPAT(ssd1307fb_of_match), +}; + +static int ssd1307_init(void) +{ + i2c_driver_register(&ssd1307fb_driver); + return 0; +} + +device_initcall(ssd1307_init); -- 2.11.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox