From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 26/45] spi: atmel_spi: Add DT support
Date: Mon, 6 Mar 2017 14:53:37 -0800 [thread overview]
Message-ID: <20170306225356.31475-27-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170306225356.31475-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/spi/atmel_spi.c | 29 ++++++++++++++++++++++++++---
1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 3f2c527..68466ef 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -29,6 +29,7 @@
#include <clock.h>
#include <xfuncs.h>
#include <gpio.h>
+#include <of_gpio.h>
#include <io.h>
#include <spi/spi.h>
#include <mach/io.h>
@@ -375,10 +376,11 @@ static int atmel_spi_probe(struct device_d *dev)
int ret = 0;
int i;
struct spi_master *master;
+ struct device_node *node = dev->device_node;
struct atmel_spi *as;
struct at91_spi_platform_data *pdata = dev->platform_data;
- if (!pdata) {
+ if (!IS_ENABLED(CONFIG_OFDEVICE) && !pdata) {
dev_err(dev, "missing platform data\n");
return -EINVAL;
}
@@ -389,6 +391,23 @@ static int atmel_spi_probe(struct device_d *dev)
master->dev = dev;
master->bus_num = dev->id;
+ if (pdata) {
+ master->num_chipselect = pdata->num_chipselect;
+ as->cs_pins = pdata->chipselect;
+ } else {
+ master->num_chipselect = of_gpio_named_count(node, "cs-gpios");
+ as->cs_pins = xzalloc(sizeof(u32) * master->num_chipselect);
+
+ for (i = 0; i < master->num_chipselect; i++) {
+ as->cs_pins[i] = of_get_named_gpio(node, "cs-gpios", i);
+
+ if (!gpio_is_valid(as->cs_pins[i]))
+ break;
+ }
+
+ master->num_chipselect = i;
+ }
+
as->clk = clk_get(dev, "spi_clk");
if (IS_ERR(as->clk)) {
dev_err(dev, "no spi_clk\n");
@@ -398,8 +417,6 @@ static int atmel_spi_probe(struct device_d *dev)
master->setup = atmel_spi_setup;
master->transfer = atmel_spi_transfer;
- master->num_chipselect = pdata->num_chipselect;
- as->cs_pins = pdata->chipselect;
iores = dev_request_mem_resource(dev, 0);
if (IS_ERR(iores))
return PTR_ERR(iores);
@@ -438,8 +455,14 @@ out_free:
return ret;
}
+static __maybe_unused const struct of_device_id atmel_spi_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-spi" },
+ { /* sentinel */ }
+};
+
static struct driver_d atmel_spi_driver = {
.name = "atmel_spi",
.probe = atmel_spi_probe,
+ .of_compatible = DRV_OF_COMPAT(atmel_spi_dt_ids),
};
device_platform_driver(atmel_spi_driver);
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-03-06 22:55 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-06 22:53 [PATCH 00/45] AT91, at91sam9x5ek updates Andrey Smirnov
2017-03-06 22:53 ` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-06 22:53 ` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build Andrey Smirnov
2017-03-06 22:53 ` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig Andrey Smirnov
2017-03-06 22:53 ` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-06 22:53 ` [PATCH 06/45] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 07/45] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-07 7:46 ` Sascha Hauer
2017-03-06 22:53 ` [PATCH 08/45] serial: atmel: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 09/45] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 10/45] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-06 22:53 ` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-06 22:53 ` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 13/45] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-06 22:53 ` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree Andrey Smirnov
2017-03-06 22:53 ` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9 Andrey Smirnov
2017-03-06 22:53 ` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 20/45] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-06 22:53 ` [PATCH 21/45] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 23/45] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-06 22:53 ` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state Andrey Smirnov
2017-03-06 22:53 ` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-06 22:53 ` Andrey Smirnov [this message]
2017-03-06 22:53 ` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov
2017-03-06 22:53 ` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-06 22:53 ` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 30/45] w1-gpio: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 32/45] usb: ohci-at91: Check result of clk_get() Andrey Smirnov
2017-03-07 16:35 ` Sam Ravnborg
2017-03-07 21:21 ` Andrey Smirnov
2017-03-07 21:52 ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 33/45] usb: ohci-at91: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 35/45] usb: ohci-at91: Add DT support Andrey Smirnov
2017-03-07 16:40 ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-06 22:53 ` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 41/45] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 42/45] at91sam9x5ek: Configure USB in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 43/45] net: macb: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 45/45] at91sam9x5ek: Configure NAND " Andrey Smirnov
2017-03-07 8:13 ` [PATCH 00/45] AT91, at91sam9x5ek updates Sascha Hauer
2017-03-07 21:09 ` Andrey Smirnov
2017-03-07 16:34 ` Sam Ravnborg
2017-03-07 16:56 ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-07 20:58 ` Sam Ravnborg
2017-03-07 21:18 ` Andrey Smirnov
2017-03-07 21:47 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170306225356.31475-27-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox