From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 33/45] usb: ohci-at91: Convert global variables to private data
Date: Mon, 6 Mar 2017 14:53:44 -0800 [thread overview]
Message-ID: <20170306225356.31475-34-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170306225356.31475-1-andrew.smirnov@gmail.com>
Store driver data in per-device private variable as opposed to storing
it in global vairables.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/usb/host/ohci-at91.c | 59 +++++++++++++++++++++++++++-----------------
1 file changed, 37 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index c70d898..57ca86a 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -27,66 +27,81 @@
#include "ohci.h"
-/* interface and function clocks; sometimes also an AHB clock */
-static struct clk *iclk, *fclk;
+struct ohci_at91_priv {
+ struct device_d *dev;
+ struct clk *iclk;
+ struct clk *fclk;
+ struct ohci_regs __iomem *regs;
+};
-static void at91_start_clock(void)
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
{
- clk_enable(iclk);
- clk_enable(fclk);
+ clk_enable(ohci_at91->iclk);
+ clk_enable(ohci_at91->fclk);
}
-static void at91_stop_clock(void)
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
{
- clk_disable(fclk);
- clk_disable(iclk);
+ clk_disable(ohci_at91->fclk);
+ clk_disable(ohci_at91->iclk);
}
static int at91_ohci_probe(struct device_d *dev)
{
- struct ohci_regs __iomem *regs = (struct ohci_regs __iomem *)dev->resource[0].start;
+ struct resource *io;
+ struct ohci_at91_priv *ohci_at91 = xzalloc(sizeof(*ohci_at91));
+
+ dev->priv = ohci_at91;
+ ohci_at91->dev = dev;
+
+ io = dev_get_resource(dev, IORESOURCE_MEM, 0);
+ if (IS_ERR(io)) {
+ dev_err(dev, "Failed to get IORESOURCE_MEM\n");
+ return PTR_ERR(io);
+ }
+ ohci_at91->regs = IOMEM(io->start);
- iclk = clk_get(NULL, "ohci_clk");
- if (IS_ERR(iclk)) {
+ ohci_at91->iclk = clk_get(NULL, "ohci_clk");
+ if (IS_ERR(ohci_at91->iclk)) {
dev_err(dev, "Failed to get 'iclk'\n");
- return PTR_ERR(iclk);
+ return PTR_ERR(ohci_at91->iclk);
}
- fclk = clk_get(NULL, "uhpck");
- if (IS_ERR(fclk)) {
+ ohci_at91->fclk = clk_get(NULL, "uhpck");
+ if (IS_ERR(ohci_at91->fclk)) {
dev_err(dev, "Failed to get 'fclk'\n");
- return PTR_ERR(fclk);
+ return PTR_ERR(ohci_at91->fclk);
}
/*
* Start the USB clocks.
*/
- at91_start_clock();
+ at91_start_clock(ohci_at91);
/*
* The USB host controller must remain in reset.
*/
- writel(0, ®s->control);
+ writel(0, &ohci_at91->regs->control);
- add_generic_device("ohci", DEVICE_ID_DYNAMIC, NULL, dev->resource[0].start,
- resource_size(&dev->resource[0]), IORESOURCE_MEM, NULL);
+ add_generic_device("ohci", DEVICE_ID_DYNAMIC, NULL, io->start,
+ resource_size(io), IORESOURCE_MEM, NULL);
return 0;
}
static void at91_ohci_remove(struct device_d *dev)
{
- struct ohci_regs __iomem *regs = (struct ohci_regs __iomem *)dev->resource[0].start;
+ struct ohci_at91_priv *ohci_at91 = dev->priv;
/*
* Put the USB host controller into reset.
*/
- writel(0, ®s->control);
+ writel(0, &ohci_at91->regs->control);
/*
* Stop the USB clocks.
*/
- at91_stop_clock();
+ at91_stop_clock(ohci_at91);
}
static struct driver_d at91_ohci_driver = {
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-03-06 22:55 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-06 22:53 [PATCH 00/45] AT91, at91sam9x5ek updates Andrey Smirnov
2017-03-06 22:53 ` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-06 22:53 ` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build Andrey Smirnov
2017-03-06 22:53 ` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig Andrey Smirnov
2017-03-06 22:53 ` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-06 22:53 ` [PATCH 06/45] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 07/45] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-07 7:46 ` Sascha Hauer
2017-03-06 22:53 ` [PATCH 08/45] serial: atmel: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 09/45] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 10/45] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-06 22:53 ` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-06 22:53 ` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 13/45] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-06 22:53 ` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree Andrey Smirnov
2017-03-06 22:53 ` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9 Andrey Smirnov
2017-03-06 22:53 ` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 20/45] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-06 22:53 ` [PATCH 21/45] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 23/45] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-06 22:53 ` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state Andrey Smirnov
2017-03-06 22:53 ` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-06 22:53 ` [PATCH 26/45] spi: atmel_spi: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov
2017-03-06 22:53 ` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-06 22:53 ` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 30/45] w1-gpio: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 32/45] usb: ohci-at91: Check result of clk_get() Andrey Smirnov
2017-03-07 16:35 ` Sam Ravnborg
2017-03-07 21:21 ` Andrey Smirnov
2017-03-07 21:52 ` Sam Ravnborg
2017-03-06 22:53 ` Andrey Smirnov [this message]
2017-03-06 22:53 ` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 35/45] usb: ohci-at91: Add DT support Andrey Smirnov
2017-03-07 16:40 ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-06 22:53 ` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 41/45] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 42/45] at91sam9x5ek: Configure USB in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 43/45] net: macb: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 45/45] at91sam9x5ek: Configure NAND " Andrey Smirnov
2017-03-07 8:13 ` [PATCH 00/45] AT91, at91sam9x5ek updates Sascha Hauer
2017-03-07 21:09 ` Andrey Smirnov
2017-03-07 16:34 ` Sam Ravnborg
2017-03-07 16:56 ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-07 20:58 ` Sam Ravnborg
2017-03-07 21:18 ` Andrey Smirnov
2017-03-07 21:47 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170306225356.31475-34-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox