mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 00/45] AT91, at91sam9x5ek updates
Date: Tue, 7 Mar 2017 09:13:30 +0100	[thread overview]
Message-ID: <20170307081330.gb3iz6gebpbwlt3r@pengutronix.de> (raw)
In-Reply-To: <20170306225356.31475-1-andrew.smirnov@gmail.com>

Hi Andrey,

On Mon, Mar 06, 2017 at 02:53:11PM -0800, Andrey Smirnov wrote:
> Hi everyone,
> 
> I recently had a chance to work with at91sam9x5ek board and as a part
> of that effort I converted the code to support features found in
> Barebox for i.MX based SoCs. Most notably this patchset converts
> at91sam9x5ek to use multi-image PBL build process as well as adds
> support for board initialization from attached devicetree blob.
> 
> Sascha, at least for now, all of the patches, in chronological order,
> are included in this submission. However if this proves to be too
> burdensome to review, I'd be more than happy to split it into several
> individual submissions. One such division could be:
> 
> 	   - Generic bug fixes/infrastructure enhancements
> 	   - Peripheral drivers updates
> 	   - at91sam9x5ek specific changes
> 
> Please let me know if that is preferrable.

I had a short look at all patches, overall they look good. Nevertheless
it would be good to sort them like you suggested. It just makes it
easier to apply.

Thanks for working on this, a general AT91 overhaul was long overdue. I
hope this series prepares a path to cleanup the other AT91 SoCs aswell.

The clock support you ported over from the kernel is for all AT91 SoCs
and not only one, right?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-03-07  8:13 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-06 22:53 Andrey Smirnov
2017-03-06 22:53 ` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-06 22:53 ` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build Andrey Smirnov
2017-03-06 22:53 ` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig Andrey Smirnov
2017-03-06 22:53 ` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-06 22:53 ` [PATCH 06/45] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 07/45] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-07  7:46   ` Sascha Hauer
2017-03-06 22:53 ` [PATCH 08/45] serial: atmel: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 09/45] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 10/45] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-06 22:53 ` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-06 22:53 ` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 13/45] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-06 22:53 ` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree Andrey Smirnov
2017-03-06 22:53 ` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9 Andrey Smirnov
2017-03-06 22:53 ` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 20/45] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-06 22:53 ` [PATCH 21/45] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 23/45] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-06 22:53 ` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state Andrey Smirnov
2017-03-06 22:53 ` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-06 22:53 ` [PATCH 26/45] spi: atmel_spi: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov
2017-03-06 22:53 ` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-06 22:53 ` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 30/45] w1-gpio: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 32/45] usb: ohci-at91: Check result of clk_get() Andrey Smirnov
2017-03-07 16:35   ` Sam Ravnborg
2017-03-07 21:21     ` Andrey Smirnov
2017-03-07 21:52       ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 33/45] usb: ohci-at91: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 35/45] usb: ohci-at91: Add DT support Andrey Smirnov
2017-03-07 16:40   ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-06 22:53 ` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 41/45] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 42/45] at91sam9x5ek: Configure USB in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 43/45] net: macb: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 45/45] at91sam9x5ek: Configure NAND " Andrey Smirnov
2017-03-07  8:13 ` Sascha Hauer [this message]
2017-03-07 21:09   ` [PATCH 00/45] AT91, at91sam9x5ek updates Andrey Smirnov
2017-03-07 16:34 ` Sam Ravnborg
2017-03-07 16:56   ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-07 20:58     ` Sam Ravnborg
2017-03-07 21:18       ` Andrey Smirnov
2017-03-07 21:47         ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170307081330.gb3iz6gebpbwlt3r@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox