From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from asavdk3.altibox.net ([109.247.116.14]) by casper.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1clMCI-0007jJ-SJ for barebox@lists.infradead.org; Tue, 07 Mar 2017 20:59:10 +0000 Date: Tue, 7 Mar 2017 21:58:40 +0100 From: Sam Ravnborg Message-ID: <20170307205840.GA5513@ravnborg.org> References: <20170306225356.31475-1-andrew.smirnov@gmail.com> <20170307163416.GA26868@ravnborg.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 00/45] AT91, at91sam9x5ek updates To: Jean-Christophe PLAGNIOL-VILLARD Cc: Andrey Smirnov , barebox@lists.infradead.org > > > > When booting from an SD-Card/NOR-Flash/USB would I then need > > to use at91bootstrap, or can I use only barebox? > > > > If I move forward with this and I can find an 9263 > > evaluation kit I would then also update this. > On 9263 the sram is huge so you can build barebox as first stage Good - simplicity is good. > > I add this a long time ago on usb_a9263_bootstrap_defconfig > or other (all the EK). > > This will build a barebox that can load you image from multiple source in a sequence > > and then use a std barebox > > To switch to DT you will have to import the DT I did for the kernel OK, should be straighforward. > and replace the hw i2c by a i2c gpio as the i2c IP on at91 has a lot of quirks > and for barebox it will not make sense to port it Seems less straightforward but doable. I will see if I can find time to give it a try and then post patches. Sam _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox