From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 00/20] AT91, at91sam9x5ek updates (part I/III)
Date: Wed, 8 Mar 2017 14:08:49 -0800 [thread overview]
Message-ID: <20170308220909.4560-1-andrew.smirnov@gmail.com> (raw)
Hi everone,
As discussed in original thread [1], here is a first batch of AT91
related patches. The patches gathered in this set are bugfixes, port
of functionality form Linux or code refactoring.
Feedback from Sascha and Sam has been incorporated, but other than
that the code should be as it was in [1].
Any feedback is appreciated.
Thank you,
Andrey Smirnov
[1] http://lists.infradead.org/pipermail/barebox/2017-March/029337.html
Andrey Smirnov (20):
at91: Fix bug/typo in debug_ll.h
regmap: Implement syscon_node_to_regmap()
pinctrl: at91: Fix a bug in at91_pinctrl_set_conf()
pinctrl: at91: Fix a bug in at91_pinctrl_set_state()
pinctrl: at91: Implement .get_direction hook
clk: Port two helper functions from Linux
clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
clk: No-op CLK_OF_DECLARE if not enabled
of: base: Use scoring in DT device matching
serial: atmel: Check result of clk_get()
usb: ohci-at91: Check result of clk_get()
usb: ohci-at91: Convert global variables to private data
usb: ohci-at91: Check result of clk_enable()
usb: ehci-atmel: Check result of clk_enable()
usb: echi-atmel: Convert global variables to private data
usb: ehci-atmel: Zero ehci_data before using it
usb: echi-atmel: Check result of ehci_register()
spi: atmel_spi: Configure CS GPIO as output
spi: atmel_spi: Use VERSION register instead of CPU type
clocksource: at91: Move to 'drivers/clocksource'
arch/arm/mach-at91/Kconfig | 7 +-
arch/arm/mach-at91/Makefile | 1 -
arch/arm/mach-at91/include/mach/debug_ll.h | 2 +-
drivers/clk/Kconfig | 1 +
drivers/clk/clk-fixed-factor.c | 2 -
drivers/clk/clk-fixed.c | 3 +-
drivers/clk/clk.c | 41 +++++++++++-
drivers/clk/clkdev.c | 2 +-
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
.../clocksource/timer-atmel-pit.c | 0
drivers/mfd/syscon.c | 54 ++++++++++++++-
drivers/of/base.c | 37 ++++++-----
drivers/pinctrl/pinctrl-at91.c | 22 ++++++-
drivers/serial/atmel.c | 5 ++
drivers/spi/atmel_spi.c | 41 ++++++++++--
drivers/spi/atmel_spi.h | 1 +
drivers/usb/host/ehci-atmel.c | 57 +++++++++++-----
drivers/usb/host/ohci-at91.c | 76 +++++++++++++++++-----
include/linux/clk.h | 9 ++-
include/mfd/syscon.h | 8 +++
21 files changed, 299 insertions(+), 75 deletions(-)
rename arch/arm/mach-at91/at91sam926x_time.c => drivers/clocksource/timer-atmel-pit.c (100%)
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2017-03-08 22:09 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-08 22:08 Andrey Smirnov [this message]
2017-03-08 22:08 ` [PATCH 01/20] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-08 22:08 ` [PATCH 02/20] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 03/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 04/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_state() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 05/20] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-08 22:08 ` [PATCH 06/20] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-08 22:08 ` [PATCH 07/20] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-08 22:08 ` [PATCH 08/20] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-09 10:54 ` Sascha Hauer
2017-03-08 22:08 ` [PATCH 09/20] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-08 22:08 ` [PATCH 10/20] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 11/20] usb: ohci-at91: " Andrey Smirnov
2017-03-08 22:09 ` [PATCH 12/20] usb: ohci-at91: Convert global variables to private data Andrey Smirnov
2017-03-08 22:09 ` [PATCH 13/20] usb: ohci-at91: Check result of clk_enable() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 14/20] usb: ehci-atmel: " Andrey Smirnov
2017-03-08 22:09 ` [PATCH 15/20] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-08 22:09 ` [PATCH 16/20] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-08 22:09 ` [PATCH 17/20] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 18/20] spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov
2017-03-08 22:09 ` [PATCH 19/20] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-08 22:09 ` [PATCH 20/20] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-09 7:19 ` [PATCH 00/20] AT91, at91sam9x5ek updates (part I/III) Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170308220909.4560-1-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox