mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 18/20] spi: atmel_spi: Configure CS GPIO as output
Date: Wed,  8 Mar 2017 14:09:07 -0800	[thread overview]
Message-ID: <20170308220909.4560-19-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170308220909.4560-1-andrew.smirnov@gmail.com>

On AT91 GPIOs default to being inputs, so we need to explicitly
configure CS gpio to being an output.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/spi/atmel_spi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 3f2c527..67028e6 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -172,6 +172,8 @@ static int atmel_spi_setup(struct spi_device *spi)
 	struct spi_master	*master = spi->master;
 	struct atmel_spi	*as = to_atmel_spi(master);
 
+	int			npcs_pin;
+	unsigned		active = spi->mode & SPI_CS_HIGH;
 	u32			scbr, csr;
 	unsigned int		bits = spi->bits_per_word;
 	unsigned long		bus_hz;
@@ -183,6 +185,8 @@ static int atmel_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	npcs_pin = as->cs_pins[spi->chip_select];
+
 	if (bits < 8 || bits > 16) {
 		dev_dbg(&spi->dev,
 				"setup: invalid bits_per_word %u (8 to 16)\n",
@@ -235,7 +239,7 @@ static int atmel_spi_setup(struct spi_device *spi)
 	csr |= SPI_BF(DLYBS, 0);
 	csr |= SPI_BF(DLYBCT, 0);
 
-	/* gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); */
+	gpio_direction_output(npcs_pin, !active);
 	dev_dbg(master->dev,
 		"setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
 		bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-03-08 22:10 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-08 22:08 [PATCH 00/20] AT91, at91sam9x5ek updates (part I/III) Andrey Smirnov
2017-03-08 22:08 ` [PATCH 01/20] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-08 22:08 ` [PATCH 02/20] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 03/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 04/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_state() Andrey Smirnov
2017-03-08 22:08 ` [PATCH 05/20] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-08 22:08 ` [PATCH 06/20] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-08 22:08 ` [PATCH 07/20] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-08 22:08 ` [PATCH 08/20] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-09 10:54   ` Sascha Hauer
2017-03-08 22:08 ` [PATCH 09/20] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-08 22:08 ` [PATCH 10/20] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 11/20] usb: ohci-at91: " Andrey Smirnov
2017-03-08 22:09 ` [PATCH 12/20] usb: ohci-at91: Convert global variables to private data Andrey Smirnov
2017-03-08 22:09 ` [PATCH 13/20] usb: ohci-at91: Check result of clk_enable() Andrey Smirnov
2017-03-08 22:09 ` [PATCH 14/20] usb: ehci-atmel: " Andrey Smirnov
2017-03-08 22:09 ` [PATCH 15/20] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-08 22:09 ` [PATCH 16/20] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-08 22:09 ` [PATCH 17/20] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-08 22:09 ` Andrey Smirnov [this message]
2017-03-08 22:09 ` [PATCH 19/20] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-08 22:09 ` [PATCH 20/20] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-09  7:19 ` [PATCH 00/20] AT91, at91sam9x5ek updates (part I/III) Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170308220909.4560-19-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox