From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Markus Pargmann <mpa@pengutronix.de>
Subject: [PATCH 1/4] led: Allow blinking/flashing on led level
Date: Sat, 11 Mar 2017 15:02:34 +0100 [thread overview]
Message-ID: <20170311140237.6958-1-o.rempel@pengutronix.de> (raw)
From: Sascha Hauer <s.hauer@pengutronix.de>
So far blinking/flashing LEDs is only supported on led-trigger level.
Even without triggers it useful to be able to blink/flash LEDs, so
add this functionality to the LED core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
led: Introduce led_blink_pattern for flexible LED blinking
A pattern consists of a number of on and off-periods which are described
in an array. Using such an array you can encode nearly every blink
pattern you need.
led_blink and led_flash are rewritten to use the new mechanism.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
drivers/led/core.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
include/led.h | 11 ++++++
2 files changed, 112 insertions(+), 1 deletion(-)
diff --git a/drivers/led/core.c b/drivers/led/core.c
index 30b016b..ab293b5 100644
--- a/drivers/led/core.c
+++ b/drivers/led/core.c
@@ -23,6 +23,7 @@
#include <linux/list.h>
#include <errno.h>
#include <led.h>
+#include <init.h>
#include <poller.h>
#include <clock.h>
#include <linux/ctype.h>
@@ -101,7 +102,7 @@ struct led *led_by_name_or_number(const char *str)
* @param led the led
* @param value the value of the LED (0 is disabled)
*/
-int led_set(struct led *led, unsigned int value)
+static int __led_set(struct led *led, unsigned int value)
{
if (value > led->max_value)
value = led->max_value;
@@ -114,6 +115,105 @@ int led_set(struct led *led, unsigned int value)
return 0;
}
+int led_set(struct led *led, unsigned int value)
+{
+ led->blink = 0;
+ led->flash = 0;
+ return __led_set(led, value);
+}
+
+static void led_blink_func(struct poller_struct *poller)
+{
+ struct led *led;
+
+ list_for_each_entry(led, &leds, list) {
+ bool on;
+
+ if (!led->blink && !led->flash)
+ continue;
+
+ if (led->blink_next_event > get_time_ns()) {
+ continue;
+ }
+
+ on = !(led->blink_next_state % 2);
+
+ led->blink_next_event = get_time_ns() +
+ (led->blink_states[led->blink_next_state] * MSECOND);
+ led->blink_next_state = (led->blink_next_state + 1) %
+ led->blink_nr_states;
+
+ if (led->flash && !on)
+ led->flash = 0;
+
+ __led_set(led, on);
+ }
+}
+
+/**
+ * led_blink_pattern - Blink a led with flexible timings.
+ * @led LED used
+ * @pattern Array of millisecond intervals describing the on and off periods of
+ * the pattern. At the end of the array/pattern it is repeated. The array
+ * starts with an on-period. In general every array item with even index
+ * describes an on-period, every item with odd index an off-period.
+ * @pattern_len Length of the pattern array.
+ *
+ * Returns 0 on success.
+ *
+ * Example:
+ * pattern = {500, 1000};
+ * This will enable the LED for 500ms and disable it for 1000ms after
+ * that. This is repeated forever.
+ */
+int led_blink_pattern(struct led *led, const unsigned int *pattern,
+ unsigned int pattern_len)
+{
+ if (led->blink_states)
+ free(led->blink_states);
+ led->blink_states = xmemdup(pattern,
+ pattern_len * sizeof(*led->blink_states));
+ led->blink_nr_states = pattern_len;
+ led->blink_next_state = 0;
+ led->blink_next_event = get_time_ns();
+ led->blink = 1;
+ led->flash = 0;
+
+ return 0;
+}
+
+int led_blink(struct led *led, unsigned int on_ms, unsigned int off_ms)
+{
+ unsigned int pattern[] = {on_ms, off_ms};
+
+ return led_blink_pattern(led, pattern, 2);
+}
+
+int led_flash(struct led *led, unsigned int duration_ms)
+{
+ unsigned int pattern[] = {duration_ms, 0};
+ int ret;
+
+ ret = led_blink_pattern(led, pattern, 2);
+ if (ret)
+ return ret;
+
+ led->flash = 1;
+ led->blink = 0;
+
+ return 0;
+}
+
+static struct poller_struct led_poller = {
+ .func = led_blink_func,
+};
+
+static int led_blink_init(void)
+{
+ return poller_register(&led_poller);
+}
+late_initcall(led_blink_init);
+
/**
* led_set_num - set the value of a LED
* @param num the number of the LED
diff --git a/include/led.h b/include/led.h
index 000267c..fb5c48b 100644
--- a/include/led.h
+++ b/include/led.h
@@ -12,6 +12,13 @@ struct led {
char *name;
int num;
struct list_head list;
+
+ int blink;
+ int flash;
+ unsigned int *blink_states;
+ int blink_nr_states;
+ int blink_next_state;
+ uint64_t blink_next_event;
};
struct led *led_by_number(int no);
@@ -25,6 +32,10 @@ static inline int led_get_number(struct led *led)
int led_set_num(int num, unsigned int value);
int led_set(struct led *led, unsigned int value);
+int led_blink(struct led *led, unsigned int on_ms, unsigned int off_ms);
+int led_blink_pattern(struct led *led, const unsigned int *pattern,
+ unsigned int pattern_len);
+int led_flash(struct led *led, unsigned int duration_ms);
int led_register(struct led *led);
void led_unregister(struct led *led);
void led_unregister(struct led *led);
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2017-03-11 14:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-11 14:02 Oleksij Rempel [this message]
2017-03-11 14:02 ` [PATCH 2/4] led: Add blink/flash to led command Oleksij Rempel
2017-03-11 14:02 ` [PATCH 3/4] led: trigger: Use led triggers Oleksij Rempel
2017-03-11 14:02 ` [PATCH 4/4] led-trigger: rework Oleksij Rempel
2017-03-11 14:04 ` [PATCH 1/4] led: Allow blinking/flashing on led level Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170311140237.6958-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=mpa@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox