mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Peter Mamonov <pmamonov@gmail.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] net/phy: marvell: import support for 88E1111 from the Linux
Date: Mon, 13 Mar 2017 12:32:03 +0300	[thread overview]
Message-ID: <20170313093203.GC1864@berta> (raw)
In-Reply-To: <20170312121049.GC25192@mail.ovh.net>

Hi,

On Sun, Mar 12, 2017 at 01:10:49PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> 	Why 2 patches?

The first patch is missing a few lines of code, so I've sent the second version.
Sorry, I should mention it in the message.

Regards,
Peter

> 
> Best Regards,
> J/
> On 18:18 Fri 10 Mar     , pmamonov@gmail.com wrote:
> > From: Peter Mamonov <pmamonov@gmail.com>
> > 
> > Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
> > ---
> >  drivers/net/phy/marvell.c | 126 ++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 126 insertions(+)
> > 
> > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> > index 38b2ad31f..ea5a4a9be 100644
> > --- a/drivers/net/phy/marvell.c
> > +++ b/drivers/net/phy/marvell.c
> > @@ -31,6 +31,22 @@
> >  #define MII_M1011_PHY_STATUS_RESOLVED	BIT(11)
> >  #define MII_M1011_PHY_STATUS_LINK	BIT(10)
> >  
> > +#define MII_M1111_PHY_LED_CONTROL	0x18
> > +#define MII_M1111_PHY_LED_DIRECT	0x4100
> > +#define MII_M1111_PHY_LED_COMBINE	0x411c
> > +#define MII_M1111_PHY_EXT_CR		0x14
> > +#define MII_M1111_RX_DELAY		0x80
> > +#define MII_M1111_TX_DELAY		0x2
> > +#define MII_M1111_PHY_EXT_SR		0x1b
> > +
> > +#define MII_M1111_HWCFG_MODE_MASK		0xf
> > +#define MII_M1111_HWCFG_MODE_COPPER_RGMII	0xb
> > +#define MII_M1111_HWCFG_MODE_FIBER_RGMII	0x3
> > +#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK	0x4
> > +#define MII_M1111_HWCFG_MODE_COPPER_RTBI	0x9
> > +#define MII_M1111_HWCFG_FIBER_COPPER_AUTO	0x8000
> > +#define MII_M1111_HWCFG_FIBER_COPPER_RES	0x2000
> > +
> >  #define MII_M1111_COPPER		0
> >  #define MII_M1111_FIBER			1
> >  
> > @@ -402,6 +418,107 @@ static int m88e1540_config_init(struct phy_device *phydev)
> >  	return marvell_config_init(phydev);
> >  }
> >  
> > +static int m88e1111_config_init(struct phy_device *phydev)
> > +{
> > +	int err;
> > +	int temp;
> > +
> > +	if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
> > +	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
> > +	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
> > +	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
> > +
> > +		temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
> > +		if (temp < 0)
> > +			return temp;
> > +
> > +		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
> > +			temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
> > +		} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
> > +			temp &= ~MII_M1111_TX_DELAY;
> > +			temp |= MII_M1111_RX_DELAY;
> > +		} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
> > +			temp &= ~MII_M1111_RX_DELAY;
> > +			temp |= MII_M1111_TX_DELAY;
> > +		}
> > +
> > +		err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
> > +		if (err < 0)
> > +			return err;
> > +
> > +		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> > +		if (temp < 0)
> > +			return temp;
> > +
> > +		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
> > +
> > +		if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
> > +			temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
> > +		else
> > +			temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
> > +
> > +		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> > +		if (err < 0)
> > +			return err;
> > +	}
> > +
> > +	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
> > +		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> > +		if (temp < 0)
> > +			return temp;
> > +
> > +		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
> > +		temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
> > +		temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
> > +
> > +		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> > +		if (err < 0)
> > +			return err;
> > +	}
> > +
> > +	if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
> > +		temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
> > +		if (temp < 0)
> > +			return temp;
> > +		temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
> > +		err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
> > +		if (err < 0)
> > +			return err;
> > +
> > +		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> > +		if (temp < 0)
> > +			return temp;
> > +		temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
> > +		temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
> > +		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> > +		if (err < 0)
> > +			return err;
> > +
> > +		/* soft reset */
> > +		err = phy_write(phydev, MII_BMCR, BMCR_RESET);
> > +		if (err < 0)
> > +			return err;
> > +		do
> > +			temp = phy_read(phydev, MII_BMCR);
> > +		while (temp & BMCR_RESET);
> > +
> > +		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> > +		if (temp < 0)
> > +			return temp;
> > +		temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
> > +		temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
> > +		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> > +		if (err < 0)
> > +			return err;
> > +	}
> > +
> > +	err = marvell_of_reg_init(phydev);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	return phy_write(phydev, MII_BMCR, BMCR_RESET);
> > +}
> > +
> >  static int m88e1121_config_init(struct phy_device *phydev)
> >  {
> >  	u16 reg;
> > @@ -502,6 +619,15 @@ static int m88e1510_config_init(struct phy_device *phydev)
> >  
> >  static struct phy_driver marvell_drivers[] = {
> >  	{
> > +		.phy_id = MARVELL_PHY_ID_88E1111,
> > +		.phy_id_mask = MARVELL_PHY_ID_MASK,
> > +		.drv.name = "Marvell 88E1111",
> > +		.features = PHY_GBIT_FEATURES,
> > +		.config_init = &m88e1111_config_init,
> > +		.config_aneg = &genphy_config_aneg,
> > +		.read_status = &marvell_read_status,
> > +	},
> > +	{
> >  		.phy_id = MARVELL_PHY_ID_88E1121R,
> >  		.phy_id_mask = MARVELL_PHY_ID_MASK,
> >  		.drv.name = "Marvell 88E1121R",
> > -- 
> > 2.11.0
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-03-13  9:32 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-10 15:02 pmamonov
2017-03-10 15:18 ` pmamonov
2017-03-12 12:10   ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-13  9:32     ` Peter Mamonov [this message]
2017-03-14  7:19   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170313093203.GC1864@berta \
    --to=pmamonov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox