mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III)
Date: Tue, 14 Mar 2017 08:52:11 -0700	[thread overview]
Message-ID: <20170314155222.11657-1-andrew.smirnov@gmail.com> (raw)

Hi everone,

This is the second batch of AT91 related patches (original thread
[1]). The patches gathered in this set are with a few exceptions are
patches adding DT probing support for various AT91 drivers.

Feedback from Sam has been incorporated, but other than that the code
should be as it was in [1].

Any feedback is appreciated.

Thank you,
Andrey Smirnov

[1] http://lists.infradead.org/pipermail/barebox/2017-March/029337.html

Andrey Smirnov (11):
  clocksource: at91: Add DT compatibility table
  serial: atmel: Add DT compatibility table
  clk: at91: Port at91 DT clock code
  mci: Allow parsing for explicit DT node
  mci: atmel_mci: Add DT support
  spi: atmel_spi: Add DT support
  w1-gpio: Add DT support
  usb: ohci-at91: Add DT support
  usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled
  usb: echi-atmel: Add DT support
  net: macb: Add DT support

 arch/arm/Kconfig                        |   1 +
 arch/arm/mach-at91/Kconfig              |  20 ++
 arch/arm/mach-at91/include/mach/board.h |   6 +-
 drivers/clk/Makefile                    |   1 +
 drivers/clk/at91/Makefile               |  15 +
 drivers/clk/at91/clk-generated.c        | 323 ++++++++++++++++++
 drivers/clk/at91/clk-h32mx.c            | 125 +++++++
 drivers/clk/at91/clk-main.c             | 576 ++++++++++++++++++++++++++++++++
 drivers/clk/at91/clk-master.c           | 245 ++++++++++++++
 drivers/clk/at91/clk-peripheral.c       | 430 ++++++++++++++++++++++++
 drivers/clk/at91/clk-pll.c              | 516 ++++++++++++++++++++++++++++
 drivers/clk/at91/clk-plldiv.c           | 135 ++++++++
 drivers/clk/at91/clk-programmable.c     | 254 ++++++++++++++
 drivers/clk/at91/clk-slow.c             | 108 ++++++
 drivers/clk/at91/clk-smd.c              | 172 ++++++++++
 drivers/clk/at91/clk-system.c           | 160 +++++++++
 drivers/clk/at91/clk-usb.c              | 397 ++++++++++++++++++++++
 drivers/clk/at91/clk-utmi.c             | 138 ++++++++
 drivers/clk/at91/pmc.c                  |  41 +++
 drivers/clk/at91/pmc.h                  |  27 ++
 drivers/clk/at91/sckc.c                 | 485 +++++++++++++++++++++++++++
 drivers/clocksource/timer-atmel-pit.c   |   9 +
 drivers/mci/atmel_mci.c                 | 101 ++++--
 drivers/mci/mci-core.c                  |  13 +-
 drivers/net/macb.c                      |  56 +++-
 drivers/serial/atmel.c                  |   7 +
 drivers/spi/atmel_spi.c                 |  29 +-
 drivers/usb/host/Kconfig                |   5 +-
 drivers/usb/host/ehci-atmel.c           |  11 +-
 drivers/usb/host/ohci-at91.c            |  93 +++++-
 drivers/w1/masters/w1-gpio.c            |  53 +++
 include/linux/clk/at91_pmc.h            | 188 +++++++++++
 include/mci.h                           |   1 +
 33 files changed, 4679 insertions(+), 62 deletions(-)
 create mode 100644 drivers/clk/at91/Makefile
 create mode 100644 drivers/clk/at91/clk-generated.c
 create mode 100644 drivers/clk/at91/clk-h32mx.c
 create mode 100644 drivers/clk/at91/clk-main.c
 create mode 100644 drivers/clk/at91/clk-master.c
 create mode 100644 drivers/clk/at91/clk-peripheral.c
 create mode 100644 drivers/clk/at91/clk-pll.c
 create mode 100644 drivers/clk/at91/clk-plldiv.c
 create mode 100644 drivers/clk/at91/clk-programmable.c
 create mode 100644 drivers/clk/at91/clk-slow.c
 create mode 100644 drivers/clk/at91/clk-smd.c
 create mode 100644 drivers/clk/at91/clk-system.c
 create mode 100644 drivers/clk/at91/clk-usb.c
 create mode 100644 drivers/clk/at91/clk-utmi.c
 create mode 100644 drivers/clk/at91/pmc.c
 create mode 100644 drivers/clk/at91/pmc.h
 create mode 100644 drivers/clk/at91/sckc.c
 create mode 100644 include/linux/clk/at91_pmc.h

-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2017-03-14 15:53 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-14 15:52 Andrey Smirnov [this message]
2017-03-14 15:52 ` [PATCH 01/11] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-15 20:33   ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 02/11] serial: atmel: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 03/11] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-14 15:52 ` [PATCH 04/11] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-14 15:52 ` [PATCH 05/11] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 06/11] spi: atmel_spi: " Andrey Smirnov
2017-03-15 20:54   ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 07/11] w1-gpio: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 08/11] usb: ohci-at91: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 09/11] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-14 15:52 ` [PATCH 10/11] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 11/11] net: macb: " Andrey Smirnov
2017-03-15 21:03 ` [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170314155222.11657-1-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox