From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 04/11] mci: Allow parsing for explicit DT node
Date: Tue, 14 Mar 2017 08:52:15 -0700 [thread overview]
Message-ID: <20170314155222.11657-5-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170314155222.11657-1-andrew.smirnov@gmail.com>
Convert mci_of_parse into mci_of_parse_node, a function that takes
explicit deivce tree node pointer to be used for SD/MMC related
properties extraction. Implement original mci_of_parse as a wrapper
around the call to new function.
This is useful for controllers who specify parameter like bus witdth and
GPIOs as a part of main controller's child nodes (e.g. AT91 SoCs).
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mci/mci-core.c | 13 ++++++++-----
include/mci.h | 1 +
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 055a5e2..928277a 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -1843,20 +1843,18 @@ err_free:
return ret;
}
-void mci_of_parse(struct mci_host *host)
+void mci_of_parse_node(struct mci_host *host,
+ struct device_node *np)
{
- struct device_node *np;
u32 bus_width;
u32 dsr_val;
if (!IS_ENABLED(CONFIG_OFDEVICE))
return;
- if (!host->hw_dev || !host->hw_dev->device_node)
+ if (!host->hw_dev || !np)
return;
- np = host->hw_dev->device_node;
-
/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
/* If bus-width is missing we get the driver's default, which
@@ -1897,6 +1895,11 @@ void mci_of_parse(struct mci_host *host)
host->non_removable = of_property_read_bool(np, "non-removable");
}
+void mci_of_parse(struct mci_host *host)
+{
+ return mci_of_parse_node(host, host->hw_dev->device_node);
+}
+
struct mci *mci_get_device_by_name(const char *name)
{
struct mci *mci;
diff --git a/include/mci.h b/include/mci.h
index cc4712c..781e6e0 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -480,6 +480,7 @@ struct mci {
int mci_register(struct mci_host*);
void mci_of_parse(struct mci_host *host);
+void mci_of_parse_node(struct mci_host *host, struct device_node *np);
int mci_detect_card(struct mci_host *);
int mci_send_ext_csd(struct mci *mci, char *ext_csd);
int mci_switch(struct mci *mci, unsigned set, unsigned index,
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-03-14 15:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-14 15:52 [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Andrey Smirnov
2017-03-14 15:52 ` [PATCH 01/11] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-15 20:33 ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 02/11] serial: atmel: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 03/11] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-14 15:52 ` Andrey Smirnov [this message]
2017-03-14 15:52 ` [PATCH 05/11] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 06/11] spi: atmel_spi: " Andrey Smirnov
2017-03-15 20:54 ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 07/11] w1-gpio: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 08/11] usb: ohci-at91: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 09/11] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-14 15:52 ` [PATCH 10/11] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 11/11] net: macb: " Andrey Smirnov
2017-03-15 21:03 ` [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170314155222.11657-5-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox