mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 05/11] mci: atmel_mci: Add DT support
Date: Tue, 14 Mar 2017 08:52:16 -0700	[thread overview]
Message-ID: <20170314155222.11657-6-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170314155222.11657-1-andrew.smirnov@gmail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/mci/atmel_mci.c | 101 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 70 insertions(+), 31 deletions(-)

diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 2a0ddb0..317cf46 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -24,6 +24,7 @@
 #include <mach/board.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <of_gpio.h>
 
 #include "atmel-mci-regs.h"
 
@@ -53,6 +54,7 @@ struct atmel_mci {
 	u32			cfg_reg;
 	u32			sdc_reg;
 	bool			need_reset;
+	int			detect_pin;
 };
 
 #define to_mci_host(mci)	container_of(mci, struct atmel_mci, mci)
@@ -360,14 +362,13 @@ static int atmci_start_cmd(struct atmel_mci *host, struct mci_cmd *cmd,
 static int atmci_card_present(struct mci_host *mci)
 {
 	struct atmel_mci *host = to_mci_host(mci);
-	struct atmel_mci_platform_data *pd = host->hw_dev->platform_data;
 	int ret;
 
 	/* No gpio, assume card is present */
-	if (!gpio_is_valid(pd->detect_pin))
+	if (!gpio_is_valid(host->detect_pin))
 		return 1;
 
-	ret = gpio_get_value(pd->detect_pin);
+	ret = gpio_get_value(host->detect_pin);
 
 	return ret == 0 ? 1 : 0;
 }
@@ -535,44 +536,71 @@ static int atmci_probe(struct device_d *hw_dev)
 {
 	struct resource *iores;
 	struct atmel_mci *host;
+	struct device_node *np = hw_dev->device_node;
 	struct atmel_mci_platform_data *pd = hw_dev->platform_data;
 	int ret;
 
-	if (!pd) {
-		dev_err(hw_dev, "missing platform data\n");
-		return -EINVAL;
+	host = xzalloc(sizeof(*host));
+	host->mci.send_cmd = atmci_request;
+	host->mci.set_ios = atmci_set_ios;
+	host->mci.init = atmci_reset;
+	host->mci.card_present = atmci_card_present;
+	host->mci.hw_dev = hw_dev;
+	host->detect_pin = -EINVAL;
+
+	if (pd) {
+		host->detect_pin  = pd->detect_pin;
+		host->mci.devname = pd->devname;
+
+		if (pd->bus_width >= 4)
+			host->mci.host_caps |= MMC_CAP_4_BIT_DATA;
+		if (pd->bus_width == 8)
+			host->mci.host_caps |= MMC_CAP_8_BIT_DATA;
+
+		host->slot_b = pd->slot_b;
+	} else if (np) {
+		u32 slot_id;
+		struct device_node *cnp;
+		const char *alias = of_alias_get(np);
+
+		if (alias)
+			host->mci.devname = xstrdup(alias);
+
+		host->detect_pin = of_get_named_gpio(np, "cd-gpios", 0);
+
+		for_each_child_of_node(np, cnp) {
+			if (of_property_read_u32(cnp, "reg", &slot_id)) {
+				dev_warn(hw_dev, "reg property is missing for %s\n",
+					 cnp->full_name);
+				continue;
+			}
+
+			host->slot_b = slot_id;
+			mci_of_parse_node(&host->mci, cnp);
+			break;
+		}
+	} else {
+		dev_err(hw_dev, "Missing device information\n");
+		ret = -EINVAL;
+		goto error_out;
 	}
 
-	if (gpio_is_valid(pd->detect_pin)) {
-		ret = gpio_request(pd->detect_pin, "mci_cd");
+	if (gpio_is_valid(host->detect_pin)) {
+		ret = gpio_request(host->detect_pin, "mci_cd");
 		if (ret) {
 			dev_err(hw_dev, "Impossible to request CD gpio %d (%d)\n",
-				ret, pd->detect_pin);
-			return ret;
+				ret, host->detect_pin);
+			goto error_out;
 		}
 
-		ret = gpio_direction_input(pd->detect_pin);
+		ret = gpio_direction_input(host->detect_pin);
 		if (ret) {
 			dev_err(hw_dev, "Impossible to configure CD gpio %d as input (%d)\n",
-				ret, pd->detect_pin);
-			goto err_gpio_cd_request;
+				ret, host->detect_pin);
+			goto error_out;
 		}
 	}
 
-	host = xzalloc(sizeof(*host));
-	host->mci.send_cmd = atmci_request;
-	host->mci.set_ios = atmci_set_ios;
-	host->mci.init = atmci_reset;
-	host->mci.card_present = atmci_card_present;
-	host->mci.hw_dev = hw_dev;
-	host->mci.devname = pd->devname;
-
-	if (pd->bus_width >= 4)
-		host->mci.host_caps |= MMC_CAP_4_BIT_DATA;
-	if (pd->bus_width == 8)
-		host->mci.host_caps |= MMC_CAP_8_BIT_DATA;
-	host->slot_b = pd->slot_b;
-
 	iores = dev_request_mem_resource(hw_dev, 0);
 	if (IS_ERR(iores))
 		return PTR_ERR(iores);
@@ -583,7 +611,7 @@ static int atmci_probe(struct device_d *hw_dev)
 	if (IS_ERR(host->clk)) {
 		dev_err(hw_dev, "no mci_clk\n");
 		ret = PTR_ERR(host->clk);
-		goto err_gpio_cd_request;
+		goto error_out;
 	}
 
 	clk_enable(host->clk);
@@ -614,15 +642,26 @@ static int atmci_probe(struct device_d *hw_dev)
 
 	return 0;
 
-err_gpio_cd_request:
-	if (gpio_is_valid(pd->detect_pin))
-		gpio_free(pd->detect_pin);
+error_out:
+	free(host);
+
+	if (gpio_is_valid(host->detect_pin))
+		gpio_free(host->detect_pin);
 
 	return ret;
 }
 
+static __maybe_unused struct of_device_id atmci_compatible[] = {
+	{
+		.compatible = "atmel,hsmci",
+	}, {
+		/* sentinel */
+	}
+};
+
 static struct driver_d atmci_driver = {
 	.name	= "atmel_mci",
 	.probe	= atmci_probe,
+	.of_compatible = DRV_OF_COMPAT(atmci_compatible),
 };
 device_platform_driver(atmci_driver);
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-03-14 15:53 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-14 15:52 [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Andrey Smirnov
2017-03-14 15:52 ` [PATCH 01/11] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-15 20:33   ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 02/11] serial: atmel: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 03/11] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-14 15:52 ` [PATCH 04/11] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-14 15:52 ` Andrey Smirnov [this message]
2017-03-14 15:52 ` [PATCH 06/11] spi: atmel_spi: Add DT support Andrey Smirnov
2017-03-15 20:54   ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 07/11] w1-gpio: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 08/11] usb: ohci-at91: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 09/11] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-14 15:52 ` [PATCH 10/11] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 11/11] net: macb: " Andrey Smirnov
2017-03-15 21:03 ` [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170314155222.11657-6-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox