From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 07/11] w1-gpio: Add DT support
Date: Tue, 14 Mar 2017 08:52:18 -0700 [thread overview]
Message-ID: <20170314155222.11657-8-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170314155222.11657-1-andrew.smirnov@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/w1/masters/w1-gpio.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 946e9d3..916027e 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -16,6 +16,7 @@
#include <driver.h>
#include <linux/w1-gpio.h>
#include <gpio.h>
+#include <of_gpio.h>
#include "../w1.h"
@@ -43,12 +44,58 @@ static u8 w1_gpio_read_bit(struct w1_bus *bus)
return gpio_get_value(pdata->pin) ? 1 : 0;
}
+static int w1_gpio_probe_dt(struct device_d *dev)
+{
+ struct w1_gpio_platform_data *pdata;
+ struct device_node *np = dev->device_node;
+ int gpio;
+
+ if (dev->platform_data)
+ return 0;
+
+ pdata = xzalloc(sizeof(*pdata));
+
+ if (of_get_property(np, "linux,open-drain", NULL))
+ pdata->is_open_drain = 1;
+
+ gpio = of_get_gpio(np, 0);
+ if (!gpio_is_valid(gpio)) {
+ if (gpio != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to parse gpio property for data pin (%d)\n",
+ gpio);
+
+ goto free_pdata;
+ }
+ pdata->pin = gpio;
+
+ gpio = of_get_gpio(np, 1);
+ if (gpio == -EPROBE_DEFER)
+ goto free_pdata;
+
+ /* ignore other errors as the pullup gpio is optional */
+ pdata->ext_pullup_enable_pin = gpio;
+
+ dev->platform_data = pdata;
+ return 0;
+
+free_pdata:
+ free(pdata);
+ return gpio;
+}
+
static int __init w1_gpio_probe(struct device_d *dev)
{
struct w1_bus *master;
struct w1_gpio_platform_data *pdata;
int err;
+ if (IS_ENABLED(CONFIG_OFDEVICE)) {
+ err = w1_gpio_probe_dt(dev);
+ if (err < 0)
+ return err;
+ }
+
pdata = dev->platform_data;
if (!pdata)
@@ -104,8 +151,14 @@ static int __init w1_gpio_probe(struct device_d *dev)
return err;
}
+static __maybe_unused const struct of_device_id w1_gpio_dt_ids[] = {
+ { .compatible = "w1-gpio" },
+ {}
+};
+
static struct driver_d w1_gpio_driver = {
.name = "w1-gpio",
.probe = w1_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(w1_gpio_dt_ids),
};
device_platform_driver(w1_gpio_driver);
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-03-14 15:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-14 15:52 [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Andrey Smirnov
2017-03-14 15:52 ` [PATCH 01/11] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-15 20:33 ` Sam Ravnborg
2017-03-14 15:52 ` [PATCH 02/11] serial: atmel: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 03/11] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-14 15:52 ` [PATCH 04/11] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-14 15:52 ` [PATCH 05/11] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 06/11] spi: atmel_spi: " Andrey Smirnov
2017-03-15 20:54 ` Sam Ravnborg
2017-03-14 15:52 ` Andrey Smirnov [this message]
2017-03-14 15:52 ` [PATCH 08/11] usb: ohci-at91: " Andrey Smirnov
2017-03-14 15:52 ` [PATCH 09/11] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-14 15:52 ` [PATCH 10/11] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-14 15:52 ` [PATCH 11/11] net: macb: " Andrey Smirnov
2017-03-15 21:03 ` [PATCH 00/11] AT91, at91sam9x5ek updates (part II/III) Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170314155222.11657-8-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox