From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 11/11] net: macb: Add DT support
Date: Thu, 16 Mar 2017 08:04:48 -0700 [thread overview]
Message-ID: <20170316150448.11773-12-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170316150448.11773-1-andrew.smirnov@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/net/macb.c | 56 ++++++++++++++++++++++++++++++++++++++++--------------
1 file changed, 42 insertions(+), 14 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 5f2e5e5..36e49c3 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -48,6 +48,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/phy.h>
+#include <of_net.h>
#include "macb.h"
@@ -615,14 +616,8 @@ static int macb_probe(struct device_d *dev)
struct resource *iores;
struct eth_device *edev;
struct macb_device *macb;
+ const char *pclk_name;
u32 ncfgr;
- struct macb_platform_data *pdata;
-
- if (!dev->platform_data) {
- dev_err(dev, "macb: no platform_data\n");
- return -ENODEV;
- }
- pdata = dev->platform_data;
edev = xzalloc(sizeof(struct eth_device) + sizeof(struct macb_device));
edev->priv = (struct macb_device *)(edev + 1);
@@ -633,22 +628,49 @@ static int macb_probe(struct device_d *dev)
edev->open = macb_open;
edev->send = macb_send;
edev->halt = macb_halt;
- edev->get_ethaddr = pdata->get_ethaddr ? pdata->get_ethaddr : macb_get_ethaddr;
+ edev->get_ethaddr = macb_get_ethaddr;
edev->set_ethaddr = macb_set_ethaddr;
edev->parent = dev;
macb->miibus.read = macb_phy_read;
macb->miibus.write = macb_phy_write;
- macb->phy_addr = pdata->phy_addr;
macb->miibus.priv = macb;
macb->miibus.parent = dev;
- if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
- macb->interface = PHY_INTERFACE_MODE_MII;
- else
- macb->interface = pdata->phy_interface;
+ if (dev->platform_data) {
+ struct macb_platform_data *pdata = dev->platform_data;
+
+ if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
+ macb->interface = PHY_INTERFACE_MODE_MII;
+ else
+ macb->interface = pdata->phy_interface;
+
+ if (pdata->get_ethaddr)
+ edev->get_ethaddr = pdata->get_ethaddr;
+
+ macb->phy_addr = pdata->phy_addr;
+ macb->phy_flags = pdata->phy_flags;
+ pclk_name = "macb_clk";
+ } else if (dev->device_node) {
+ int ret;
+ struct device_node *mdiobus;
- macb->phy_flags = pdata->phy_flags;
+ ret = of_get_phy_mode(dev->device_node);
+ if (ret < 0)
+ macb->interface = PHY_INTERFACE_MODE_MII;
+ else
+ macb->interface = ret;
+
+ mdiobus = of_get_child_by_name(dev->device_node, "mdio");
+ if (mdiobus)
+ macb->miibus.dev.device_node = mdiobus;
+
+ macb->phy_addr = -1;
+ pclk_name = NULL;
+ } else {
+ dev_err(dev, "macb: no platform_data\n");
+ return -ENODEV;
+ }
iores = dev_request_mem_resource(dev, 0);
if (IS_ERR(iores))
@@ -698,8 +720,14 @@ static int macb_probe(struct device_d *dev)
return 0;
}
+static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,at91sam9260-macb",},
+ { /* sentinel */ }
+};
+
static struct driver_d macb_driver = {
.name = "macb",
.probe = macb_probe,
+ .of_compatible = DRV_OF_COMPAT(macb_dt_ids),
};
device_platform_driver(macb_driver);
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-03-16 15:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-16 15:04 [PATCH v2 00/11] AT91, at91sam9x5ek updates (part II/III) Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 01/11] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 02/11] serial: atmel: " Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 03/11] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 04/11] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 05/11] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 06/11] spi: atmel_spi: " Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 07/11] w1-gpio: " Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 08/11] usb: ohci-at91: " Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 09/11] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-16 15:04 ` [PATCH v2 10/11] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-16 15:04 ` Andrey Smirnov [this message]
2017-07-08 22:35 ` [PATCH v2 11/11] net: macb: " Sam Ravnborg
2017-07-10 22:05 ` Andrey Smirnov
2017-03-17 12:19 ` [PATCH v2 00/11] AT91, at91sam9x5ek updates (part II/III) Sascha Hauer
2017-03-20 3:21 ` Andrey Smirnov
2017-04-15 21:50 ` Sam Ravnborg
2017-04-19 9:42 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170316150448.11773-12-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox