From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 00/14] AT91, at91sam9x5ek updates (part III/III)
Date: Thu, 23 Mar 2017 06:23:44 -0700 [thread overview]
Message-ID: <20170323132358.8539-1-andrew.smirnov@gmail.com> (raw)
Hi everone,
As discussed in original thread [1], here is a last batch of AT91
related patches. The patches gathered in this set are all related to
converting of at91sam9x5ek board to multi-image build process and DT.
With exception of a small fix to original "at91sam9x5ek: Convert to
mult-image build" and a number of comment/commit message rewordings
the code should mostly be the same as it was in original submission
[1]
Any feedback is appreciated.
Thank you,
Andrey Smirnov
[1] http://lists.infradead.org/pipermail/barebox/2017-March/029337.html
Andrey Smirnov (14):
at91sam9x5ek: Convert to mult-image build
at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig
at91sam9x5ek: Add preliminary device tree support
at91sam9x5ek: Convert to use DT clock tree
at91sam9x5ek: Remove at91sam9x5ek_mem_init()
at91: Enable PINCTRL for SOC_AT91SAM9
at91sam9x5ek: Configure LEDs in DT
at91sam9x5ek: Configure I2C via DT
at91sam9x5ek: Configure MMC in DT
at91sam9x5ek: Configure SPI in DT
at91sam9x5ek: Configure 1-wire in DT
at91sam9x5ek: Configure USB in DT
at91sam9x5ek: Configure Ethernet in DT
at91sam9x5ek: Configure NAND in DT
arch/arm/Kconfig | 1 -
arch/arm/boards/at91sam9x5ek/Makefile | 1 +
arch/arm/boards/at91sam9x5ek/hw_version.c | 6 +-
arch/arm/boards/at91sam9x5ek/hw_version.h | 1 -
arch/arm/boards/at91sam9x5ek/init.c | 226 +++-------------------
arch/arm/boards/at91sam9x5ek/lowlevel.c | 21 ++
arch/arm/configs/at91sam9x5ek_defconfig | 8 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/at91sam9x5ek.dts | 70 +++++++
arch/arm/mach-at91/Kconfig | 46 +++--
arch/arm/mach-at91/Makefile | 2 +-
arch/arm/mach-at91/at91sam9x5.c | 311 ------------------------------
arch/arm/mach-at91/setup.c | 4 +-
images/Makefile | 1 +
images/Makefile.at91 | 7 +
15 files changed, 176 insertions(+), 531 deletions(-)
create mode 100644 arch/arm/boards/at91sam9x5ek/lowlevel.c
create mode 100644 arch/arm/dts/at91sam9x5ek.dts
delete mode 100644 arch/arm/mach-at91/at91sam9x5.c
create mode 100644 images/Makefile.at91
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2017-03-23 13:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-23 13:23 Andrey Smirnov [this message]
2017-03-23 13:23 ` [PATCH 01/14] at91sam9x5ek: Convert to mult-image build Andrey Smirnov
2017-04-16 8:24 ` Sam Ravnborg
2017-04-19 9:46 ` Sascha Hauer
2017-03-23 13:23 ` [PATCH 02/14] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig Andrey Smirnov
2017-03-23 13:23 ` [PATCH 03/14] at91sam9x5ek: Add preliminary device tree support Andrey Smirnov
2017-03-23 13:23 ` [PATCH 04/14] at91sam9x5ek: Convert to use DT clock tree Andrey Smirnov
2017-03-23 13:23 ` [PATCH 05/14] at91sam9x5ek: Remove at91sam9x5ek_mem_init() Andrey Smirnov
2017-03-23 13:23 ` [PATCH 06/14] at91: Enable PINCTRL for SOC_AT91SAM9 Andrey Smirnov
2017-03-23 13:23 ` [PATCH 07/14] at91sam9x5ek: Configure LEDs in DT Andrey Smirnov
2017-03-23 13:23 ` [PATCH 08/14] at91sam9x5ek: Configure I2C via DT Andrey Smirnov
2017-03-23 13:23 ` [PATCH 09/14] at91sam9x5ek: Configure MMC in DT Andrey Smirnov
2017-03-23 13:23 ` [PATCH 10/14] at91sam9x5ek: Configure SPI " Andrey Smirnov
2017-03-23 13:23 ` [PATCH 11/14] at91sam9x5ek: Configure 1-wire " Andrey Smirnov
2017-03-23 13:23 ` [PATCH 12/14] at91sam9x5ek: Configure USB " Andrey Smirnov
2017-03-23 13:23 ` [PATCH 13/14] at91sam9x5ek: Configure Ethernet " Andrey Smirnov
2017-03-23 13:23 ` [PATCH 14/14] at91sam9x5ek: Configure NAND " Andrey Smirnov
2017-03-29 6:33 ` [PATCH 00/14] AT91, at91sam9x5ek updates (part III/III) Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170323132358.8539-1-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox