From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1cxS2A-0004FK-8H for barebox@lists.infradead.org; Mon, 10 Apr 2017 05:38:41 +0000 Date: Mon, 10 Apr 2017 07:38:16 +0200 From: Sascha Hauer Message-ID: <20170410053816.j4ydetf7kzbzej4b@pengutronix.de> References: <20170408150449.22507-1-dev@lynxeye.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20170408150449.22507-1-dev@lynxeye.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH] ARM: imx6: add Hummingboard2 support To: Lucas Stach Cc: barebox@lists.infradead.org On Sat, Apr 08, 2017 at 05:04:49PM +0200, Lucas Stach wrote: > This adds support for the Hummingboard2 baseboard for the SolidRun > MicroSOM modules. > > Signed-off-by: Lucas Stach > --- Applied, thanks Sascha > arch/arm/boards/solidrun-microsom/board.c | 19 +- > arch/arm/boards/solidrun-microsom/lowlevel.c | 42 +++ > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/imx6dl-hummingboard2.dts | 71 ++++ > arch/arm/dts/imx6q-hummingboard2.dts | 87 +++++ > arch/arm/dts/imx6qdl-hummingboard2.dtsi | 536 +++++++++++++++++++++++++++ > images/Makefile.imx | 30 +- > 7 files changed, 781 insertions(+), 8 deletions(-) > create mode 100644 arch/arm/dts/imx6dl-hummingboard2.dts > create mode 100644 arch/arm/dts/imx6q-hummingboard2.dts > create mode 100644 arch/arm/dts/imx6qdl-hummingboard2.dtsi > > diff --git a/arch/arm/boards/solidrun-microsom/board.c b/arch/arm/boards/solidrun-microsom/board.c > index b904168..155199f 100644 > --- a/arch/arm/boards/solidrun-microsom/board.c > +++ b/arch/arm/boards/solidrun-microsom/board.c > @@ -78,7 +78,9 @@ static void microsom_eth_init(void) > static int hummingboard_device_init(void) > { > if (!of_machine_is_compatible("solidrun,hummingboard/dl") && > - !of_machine_is_compatible("solidrun,hummingboard/q")) > + !of_machine_is_compatible("solidrun,hummingboard/q") && > + !of_machine_is_compatible("solidrun,hummingboard2/dl") && > + !of_machine_is_compatible("solidrun,hummingboard2/q")) > return 0; > > microsom_eth_init(); > @@ -108,13 +110,26 @@ device_initcall(h100_device_init); > > static int hummingboard_late_init(void) > { > + bool emmc_present = false; > + > if (!of_machine_is_compatible("solidrun,hummingboard/dl") && > !of_machine_is_compatible("solidrun,hummingboard/q") && > + !of_machine_is_compatible("solidrun,hummingboard2/dl") && > + !of_machine_is_compatible("solidrun,hummingboard2/q") && > !of_machine_is_compatible("auvidea,h100")) > return 0; > > + if (of_machine_is_compatible("solidrun,hummingboard2/dl") || > + of_machine_is_compatible("solidrun,hummingboard2/q")) > + emmc_present = true; > + > imx6_bbu_internal_mmc_register_handler("sdcard", "/dev/mmc1.barebox", > - BBU_HANDLER_FLAG_DEFAULT); > + emmc_present ? 0 : BBU_HANDLER_FLAG_DEFAULT); > + > + if (emmc_present) { > + imx6_bbu_internal_mmc_register_handler("emmc", > + "/dev/mmc2.barebox", BBU_HANDLER_FLAG_DEFAULT); > + } > > return 0; > } > diff --git a/arch/arm/boards/solidrun-microsom/lowlevel.c b/arch/arm/boards/solidrun-microsom/lowlevel.c > index 7b97f2e..cc15958 100644 > --- a/arch/arm/boards/solidrun-microsom/lowlevel.c > +++ b/arch/arm/boards/solidrun-microsom/lowlevel.c > @@ -5,6 +5,8 @@ > > extern char __dtb_imx6dl_hummingboard_start[]; > extern char __dtb_imx6q_hummingboard_start[]; > +extern char __dtb_imx6dl_hummingboard2_start[]; > +extern char __dtb_imx6q_hummingboard2_start[]; > extern char __dtb_imx6q_h100_start[]; > > ENTRY_FUNCTION(start_hummingboard_microsom_i1, r0, r1, r2) > @@ -47,6 +49,46 @@ ENTRY_FUNCTION(start_hummingboard_microsom_i4, r0, r1, r2) > imx6q_barebox_entry(fdt); > } > > +ENTRY_FUNCTION(start_hummingboard2_microsom_i1, r0, r1, r2) > +{ > + void *fdt; > + > + imx6_cpu_lowlevel_init(); > + > + fdt = __dtb_imx6dl_hummingboard2_start - get_runtime_offset(); > + imx6q_barebox_entry(fdt); > +} > + > +ENTRY_FUNCTION(start_hummingboard2_microsom_i2, r0, r1, r2) > +{ > + void *fdt; > + > + imx6_cpu_lowlevel_init(); > + > + fdt = __dtb_imx6dl_hummingboard2_start - get_runtime_offset(); > + imx6q_barebox_entry(fdt); > +} > + > +ENTRY_FUNCTION(start_hummingboard2_microsom_i2ex, r0, r1, r2) > +{ > + void *fdt; > + > + imx6_cpu_lowlevel_init(); > + > + fdt = __dtb_imx6q_hummingboard2_start - get_runtime_offset(); > + imx6q_barebox_entry(fdt); > +} > + > +ENTRY_FUNCTION(start_hummingboard2_microsom_i4, r0, r1, r2) > +{ > + void *fdt; > + > + imx6_cpu_lowlevel_init(); > + > + fdt = __dtb_imx6q_hummingboard2_start - get_runtime_offset(); > + imx6q_barebox_entry(fdt); > +} > + > ENTRY_FUNCTION(start_h100_microsom_i2ex, r0, r1, r2) > { > void *fdt; > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 0c9e0e8..b822561 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -68,7 +68,9 @@ pbl-dtb-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o > pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_DE0_NANO_SOC) += socfpga_cyclone5_de0_nano_soc.dtb.o > pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o > pbl-dtb-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o > -pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o imx6q-h100.dtb.o > +pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o \ > + imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \ > + imx6q-h100.dtb.o > pbl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o > pbl-dtb-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o > pbl-dtb-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o > diff --git a/arch/arm/dts/imx6dl-hummingboard2.dts b/arch/arm/dts/imx6dl-hummingboard2.dts > new file mode 100644 > index 0000000..40ef174 > --- /dev/null > +++ b/arch/arm/dts/imx6dl-hummingboard2.dts > @@ -0,0 +1,71 @@ > +/* > + * Device Tree file for SolidRun HummingBoard2 > + * Copyright (C) 2015 Rabeeh Khoury > + * Based on work by Russell King > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +/dts-v1/; > + > +#include > +#include "imx6qdl-hummingboard2.dtsi" > + > +/ { > + model = "SolidRun HummingBoard2 Solo/DualLite"; > + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; > +}; > + > +&ocotp { > + barebox,provide-mac-address = <&fec 0x620>; > +}; > + > +&usdhc3 { > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "barebox"; > + reg = <0x0 0xe0000>; > + }; > + > + partition@e0000 { > + label = "barebox-environment"; > + reg = <0xe0000 0x20000>; > + }; > +}; > diff --git a/arch/arm/dts/imx6q-hummingboard2.dts b/arch/arm/dts/imx6q-hummingboard2.dts > new file mode 100644 > index 0000000..8906558 > --- /dev/null > +++ b/arch/arm/dts/imx6q-hummingboard2.dts > @@ -0,0 +1,87 @@ > +/* > + * Device Tree file for SolidRun HummingBoard2 > + * Copyright (C) 2015 Rabeeh Khoury > + * Based on work by Russell King > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +/dts-v1/; > + > +#include > +#include "imx6qdl-hummingboard2.dtsi" > +#include "imx6q.dtsi" > + > +/ { > + model = "SolidRun HummingBoard2 Dual/Quad"; > + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; > + > + chosen { > + environment@0 { > + compatible = "barebox,environment"; > + device-path = &usdhc3, "partname:barebox-environment"; > + }; > + }; > +}; > + > +&sata { > + status = "okay"; > + fsl,transmit-level-mV = <1104>; > + fsl,transmit-boost-mdB = <0>; > + fsl,transmit-atten-16ths = <9>; > + fsl,no-spread-spectrum; > +}; > + > +&ocotp { > + barebox,provide-mac-address = <&fec 0x620>; > +}; > + > +&usdhc3 { > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "barebox"; > + reg = <0x0 0xe0000>; > + }; > + > + partition@e0000 { > + label = "barebox-environment"; > + reg = <0xe0000 0x20000>; > + }; > +}; > diff --git a/arch/arm/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/dts/imx6qdl-hummingboard2.dtsi > new file mode 100644 > index 0000000..2a5f389 > --- /dev/null > +++ b/arch/arm/dts/imx6qdl-hummingboard2.dtsi > @@ -0,0 +1,536 @@ > +/* > + * Device Tree file for SolidRun HummingBoard2 > + * Copyright (C) 2015 Rabeeh Khoury > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > +#include > +#include > + > +/ { > + chosen { > + stdout-path = &uart1; > + }; > + > + ir_recv: ir-receiver { > + compatible = "gpio-ir-receiver"; > + gpios = <&gpio7 9 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>; > + linux,rc-map-name = "rc-rc6-mce"; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + reg_usbh2_vbus: regulator-usb-h1-vbus { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>; > + regulator-name = "V_USB2"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_usbotg_vbus: regulator-usb-otg-vbus { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>; > + regulator-name = "V_USB1"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + reg_usbh3_vbus: regulator-usb-h2-vbus { > + compatible = "regulator-fixed"; > + enable-active-high; > + enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>; > + regulator-name = "V_USB3"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_usbh4_vbus: regulator-usb-h3-vbus { > + compatible = "regulator-fixed"; > + enable-active-high; > + enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>; > + regulator-name = "V_USB4"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_usdhc2_vmmc: reg-usdhc2-vmmc { > + compatible = "regulator-fixed"; > + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_vmmc>; > + regulator-boot-on; > + regulator-max-microvolt = <3300000>; > + regulator-min-microvolt = <3300000>; > + regulator-name = "V_SD"; > + startup-delay-us = <1000>; > + }; > + > + sound-sgtl5000 { > + audio-codec = <&sgtl5000>; > + audio-routing = > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias", > + "Headphone Jack", "HP_OUT"; > + compatible = "fsl,imx-audio-sgtl5000"; > + model = "On-board Codec"; > + mux-ext-port = <5>; > + mux-int-port = <1>; > + ssi-controller = <&ssi1>; > + }; > +}; > + > +&audmux { > + status = "okay"; > +}; > + > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; > + cs-gpios = <&gpio2 26 0>; > + status = "okay"; > +}; > + > +&hdmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_hdmi>; > + ddc-i2c-bus = <&i2c2>; > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_i2c1>; > + status = "okay"; > + > + pcf8523: rtc@68 { > + compatible = "nxp,pcf8523"; > + reg = <0x68>; > + }; > + > + sgtl5000: codec@0a { > + clocks = <&clks IMX6QDL_CLK_CKO>; > + compatible = "fsl,sgtl5000"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; > + reg = <0x0a>; > + VDDA-supply = <®_3p3v>; > + VDDIO-supply = <®_3p3v>; > + VDDD-supply = <®_1p8v>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_i2c2>; > + status = "okay"; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_i2c3>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + hummingboard2 { > + pinctrl_hog: hoggrp { > + fsl,pins = < > + /* > + * 36 pin headers GPIO description. The pins > + * numbering as following - > + * > + * 3.2v 5v 74 75 > + * 73 72 71 70 > + * 69 68 67 66 > + * > + * 77 78 79 76 > + * 65 64 61 60 > + * 53 52 51 50 > + * 49 48 166 132 > + * 95 94 90 91 > + * GND 54 24 204 > + * > + * The GPIO numbers can be extracted using > + * signal name from below. > + * Example - > + * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is > + * GPIO(3,10) which is (3-1)*32+10 = gpio 74 > + * > + * i.e. The mapping of GPIO(X,Y) to Linux gpio > + * number is : gpio number = (X-1) * 32 + Y > + */ > + /* DI1_PIN15 */ > + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 > + /* DI1_PIN02 */ > + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 > + /* DISP1_DATA00 */ > + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 > + /* DISP1_DATA01 */ > + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 > + /* DISP1_DATA02 */ > + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 > + /* DISP1_DATA03 */ > + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 > + /* DISP1_DATA04 */ > + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 > + /* DISP1_DATA05 */ > + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 > + /* DISP1_DATA06 */ > + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 > + /* DISP1_DATA07 */ > + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 > + /* DI1_D0_CS */ > + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 > + /* DI1_D1_CS */ > + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 > + /* DI1_PIN01 */ > + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 > + /* DI1_PIN03 */ > + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 > + /* DISP1_DATA08 */ > + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 > + /* DISP1_DATA09 */ > + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 > + /* DISP1_DATA10 */ > + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 > + /* DISP1_DATA11 */ > + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 > + /* DISP1_DATA12 */ > + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 > + /* DISP1_DATA13 */ > + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 > + /* DISP1_DATA14 */ > + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 > + /* DISP1_DATA15 */ > + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 > + /* DISP1_DATA16 */ > + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 > + /* DISP1_DATA17 */ > + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 > + /* DISP1_DATA18 */ > + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 > + /* DISP1_DATA19 */ > + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 > + /* DISP1_DATA20 */ > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 > + /* DISP1_DATA21 */ > + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 > + /* DISP1_DATA22 */ > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 > + /* DISP1_DATA23 */ > + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 > + /* DI1_DISP_CLK */ > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 > + /* SPDIF_IN */ > + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 > + /* SPDIF_OUT */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 > + > + /* MikroBUS GPIO pin number 10 */ > + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 > + >; > + }; > + > + pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 > + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 > + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 > + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ > + >; > + }; > + > + pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { > + fsl,pins = < > + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 > + >; > + }; > + > + pinctrl_hummingboard2_hdmi: hummingboard2-hdmi { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 > + >; > + }; > + > + pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 { > + fsl,pins = < > + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_hummingboard2_mipi: hummingboard2_mipi { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 > + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 > + >; > + }; > + > + pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 > + >; > + }; > + > + pinctrl_hummingboard2_pwm1: pwm1grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 > + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 > + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 > + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 > + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 > + >; > + }; > + > + pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus { > + fsl,pins = ; > + }; > + > + pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus { > + fsl,pins = ; > + }; > + > + pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus { > + fsl,pins = ; > + }; > + > + pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { > + /* > + * Similar to pinctrl_usbotg_2, but we want it > + * pulled down for a fixed host connection. > + */ > + fsl,pins = ; > + }; > + > + pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus { > + fsl,pins = ; > + }; > + > + pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { > + fsl,pins = < > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 > + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 > + >; > + }; > + > + pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 > + >; > + }; > + > + pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 > + >; > + }; > + > + pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 > + >; > + }; > + > + pinctrl_hummingboard2_vmmc: hummingboard2-vmmc { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 > + >; > + }; > + > + pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 > + >; > + }; > + > + pinctrl_hummingboard2_uart3: hummingboard2-uart3 { > + fsl,pins = < > + MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 > + >; > + }; > + }; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>; > + reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_pwm1>; > + status = "okay"; > +}; > + > +&ssi1 { > + status = "okay"; > +}; > + > +&usbh1 { > + disable-over-current; > + status = "okay"; > +}; > + > +&usbotg { > + disable-over-current; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>; > + vbus-supply = <®_usbotg_vbus>; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = < > + &pinctrl_hummingboard2_usdhc2_aux > + &pinctrl_hummingboard2_usdhc2 > + >; > + pinctrl-1 = < > + &pinctrl_hummingboard2_usdhc2_aux > + &pinctrl_hummingboard2_usdhc2_100mhz > + >; > + pinctrl-2 = < > + &pinctrl_hummingboard2_usdhc2_aux > + &pinctrl_hummingboard2_usdhc2_200mhz > + >; > + vmmc-supply = <®_usdhc2_vmmc>; > + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>; > + vmmc-supply = <®_3p3v>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hummingboard2_uart3>; > + status = "okay"; > +}; > diff --git a/images/Makefile.imx b/images/Makefile.imx > index 2563779..0677cc3 100644 > --- a/images/Makefile.imx > +++ b/images/Makefile.imx > @@ -249,16 +249,16 @@ CFG_start_imx6sx_sabresdb.pblx.imximg = $(board)/freescale-mx6sx-sabresdb/flash- > FILE_barebox-freescale-imx6sx-sabresdb.img = start_imx6sx_sabresdb.pblx.imximg > image-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += barebox-freescale-imx6sx-sabresdb.img > > -pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i1 > -CFG_start_hummingboard_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg > -FILE_barebox-solidrun-hummingboard-microsom-i1.img = start_hummingboard_microsom_i1.pblx.imximg > -image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i1.img > - > pblx-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += start_imx6_wandboard > CFG_start_imx6_wandboard.imx-sram-img = $(board)/technexion-wandboard/flash-header-technexion-wandboard.imxcfg > FILE_barebox-imx6-wandboard.img = start_imx6_wandboard.imx-sram-img > image-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += barebox-imx6-wandboard.img > > +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i1 > +CFG_start_hummingboard_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg > +FILE_barebox-solidrun-hummingboard-microsom-i1.img = start_hummingboard_microsom_i1.pblx.imximg > +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i1.img > + > pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i2 > CFG_start_hummingboard_microsom_i2.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2.imxcfg > FILE_barebox-solidrun-hummingboard-microsom-i2.img = start_hummingboard_microsom_i2.pblx.imximg > @@ -274,6 +274,26 @@ CFG_start_hummingboard_microsom_i4.pblx.imximg = $(board)/solidrun-microsom/flas > FILE_barebox-solidrun-hummingboard-microsom-i4.img = start_hummingboard_microsom_i4.pblx.imximg > image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i4.img > > +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i1 > +CFG_start_hummingboard2_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg > +FILE_barebox-solidrun-hummingboard2-microsom-i1.img = start_hummingboard2_microsom_i1.pblx.imximg > +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i1.img > + > +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i2 > +CFG_start_hummingboard2_microsom_i2.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2.imxcfg > +FILE_barebox-solidrun-hummingboard2-microsom-i2.img = start_hummingboard2_microsom_i2.pblx.imximg > +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i2.img > + > +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i2ex > +CFG_start_hummingboard2_microsom_i2ex.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2eX.imxcfg > +FILE_barebox-solidrun-hummingboard2-microsom-i2eX.img = start_hummingboard2_microsom_i2ex.pblx.imximg > +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i2eX.img > + > +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i4 > +CFG_start_hummingboard2_microsom_i4.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i4.imxcfg > +FILE_barebox-solidrun-hummingboard2-microsom-i4.img = start_hummingboard2_microsom_i4.pblx.imximg > +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i4.img > + > pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_h100_microsom_i2ex > CFG_start_h100_microsom_i2ex.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2eX.imxcfg > FILE_barebox-auvidea-h100-microsom-i2eX.img = start_h100_microsom_i2ex.pblx.imximg > -- > 2.9.3 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox