* barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP"
@ 2017-05-08 8:49 Josh Beavers
2017-05-09 5:52 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Josh Beavers @ 2017-05-08 8:49 UTC (permalink / raw)
To: barebox
Greetings,
I am trying to boot barebox on x86. I have tried barebox 2016.06.0
and 2017.05, both of which produce the same result. I see the same
thing as this thread from 2016, except the message has now been
upgraded to "BAREBOX JMP":
http://lists.infradead.org/pipermail/barebox/2016-November/028631.html
As far as I can tell by adding a pr_err() call, start_barebox() from
common/startup.c does not get called at all. Instead, something is
locking up the system between the jump out of boot_hdisk.S and the
startup code. I am using VirtualBox as a generic 64-bit x86 system in
case that matters.
Any suggestions about what to investigate would be appreciated.
Thanks,
-J
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP"
2017-05-08 8:49 barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP" Josh Beavers
@ 2017-05-09 5:52 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2017-05-09 5:52 UTC (permalink / raw)
To: Josh Beavers; +Cc: barebox
Hi Josh,
On Mon, May 08, 2017 at 04:49:05AM -0400, Josh Beavers wrote:
> Greetings,
>
> I am trying to boot barebox on x86. I have tried barebox 2016.06.0
> and 2017.05, both of which produce the same result. I see the same
> thing as this thread from 2016, except the message has now been
> upgraded to "BAREBOX JMP":
>
> http://lists.infradead.org/pipermail/barebox/2016-November/028631.html
>
>
> As far as I can tell by adding a pr_err() call, start_barebox() from
> common/startup.c does not get called at all. Instead, something is
> locking up the system between the jump out of boot_hdisk.S and the
> startup code. I am using VirtualBox as a generic 64-bit x86 system in
> case that matters.
>
> Any suggestions about what to investigate would be appreciated.
The barebox x86 port was probably only compile tested the last five
years, so I am not wondering at all. The EFI port should work fine and
is tested, but plain old x86 never reached a level in barebox that could
be called mature or usable.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-05-09 5:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-08 8:49 barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP" Josh Beavers
2017-05-09 5:52 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox