* [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull
2017-05-11 9:09 [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support Stefan Riedmueller
@ 2017-05-11 9:09 ` Stefan Riedmueller
2017-05-16 5:47 ` Sascha Hauer
2017-05-11 9:09 ` [PATCH 3/3] ARCH: ARM: Add support for phytec-phycore-imx6ull Stefan Riedmueller
2017-05-17 6:49 ` [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support Sascha Hauer
2 siblings, 1 reply; 7+ messages in thread
From: Stefan Riedmueller @ 2017-05-11 9:09 UTC (permalink / raw)
To: barebox
From linux-4.10 clock support, only skipped some unnecessary clocks
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
drivers/clk/imx/clk-imx6ul.c | 73 +++++++++++++++++++++++++++++++++++++-------
1 file changed, 62 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index f28660d..b0a6bb0 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -66,10 +66,24 @@ static const char *perclk_sels[] = { "ipg", "osc", };
static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
static const char *sim_sels[] = { "sim_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+/* epdc_pre_sels, epdc_sels, esai_sels only exists on i.MX6ULL */
+static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *esai_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
static struct clk *clks[IMX6UL_CLK_END];
static struct clk_onecell_data clk_data;
+static inline int clk_on_imx6ul(void)
+{
+ return of_machine_is_compatible("fsl,imx6ul");
+}
+
+static inline int clk_on_imx6ull(void)
+{
+ return of_machine_is_compatible("fsl,imx6ull");
+}
+
static int const clks_init_on[] __initconst = {
IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3,
IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM,
@@ -206,12 +220,19 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6UL_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
clks[IMX6UL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
clks[IMX6UL_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ if (clk_on_imx6ull())
+ clks[IMX6ULL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, esai_sels, ARRAY_SIZE(esai_sels));
clks[IMX6UL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
clks[IMX6UL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels, ARRAY_SIZE(enfc_sels));
clks[IMX6UL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels));
clks[IMX6UL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels));
- clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
- clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
+ if (clk_on_imx6ul()) {
+ clks[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
+ clks[IMX6UL_CLK_SIM_SEL] = imx_clk_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
+ } else if (clk_on_imx6ull()) {
+ clks[IMX6ULL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels));
+ clks[IMX6ULL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels));
+ }
clks[IMX6UL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
clks[IMX6UL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels));
clks[IMX6UL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
@@ -244,6 +265,10 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6UL_CLK_SAI3_PODF] = imx_clk_divider("sai3_podf", "sai3_pred", base + 0x28, 16, 6);
clks[IMX6UL_CLK_SAI1_PRED] = imx_clk_divider("sai1_pred", "sai1_sel", base + 0x28, 6, 3);
clks[IMX6UL_CLK_SAI1_PODF] = imx_clk_divider("sai1_podf", "sai1_pred", base + 0x28, 0, 6);
+ if (clk_on_imx6ull()) {
+ clks[IMX6ULL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clks[IMX6ULL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ }
clks[IMX6UL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
clks[IMX6UL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
clks[IMX6UL_CLK_SAI2_PRED] = imx_clk_divider("sai2_pred", "sai2_sel", base + 0x2c, 6, 3);
@@ -264,9 +289,15 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
clks[IMX6UL_CLK_APBHDMA] = imx_clk_gate2("apbh_dma", "bch_podf", base + 0x68, 4);
- clks[IMX6UL_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
- clks[IMX6UL_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
- clks[IMX6UL_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
+ if (clk_on_imx6ul()) {
+ clks[IMX6UL_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
+ clks[IMX6UL_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
+ clks[IMX6UL_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
+ } else if (clk_on_imx6ull()) {
+ clks[IMX6ULL_CLK_DCP_CLK] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10);
+ clks[IMX6UL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x68, 12);
+ clks[IMX6UL_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "ahb", base + 0x68, 12);
+ }
clks[IMX6UL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
clks[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
clks[IMX6UL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
@@ -275,7 +306,10 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_gate2("gpt2_serial", "perclk", base + 0x68, 26);
clks[IMX6UL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28);
clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28);
- clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
+ if (clk_on_imx6ul())
+ clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
+ else if (clk_on_imx6ull())
+ clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18);
/* CCGR1 */
clks[IMX6UL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
@@ -294,6 +328,11 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6UL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24);
/* CCGR2 */
+ if (clk_on_imx6ull()) {
+ clks[IMX6ULL_CLK_ESAI_EXTAL] = imx_clk_gate2("esai_extal", "esai_podf", base + 0x70, 0);
+ clks[IMX6ULL_CLK_ESAI_IPG] = imx_clk_gate2("esai_ipg", "ahb", base + 0x70, 0);
+ clks[IMX6ULL_CLK_ESAI_MEM] = imx_clk_gate2("esai_mem", "ahb", base + 0x70, 0);
+ }
clks[IMX6UL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
clks[IMX6UL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
clks[IMX6UL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
@@ -306,8 +345,13 @@ static int imx6_ccm_probe(struct device_d *dev)
/* CCGR3 */
clks[IMX6UL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2);
clks[IMX6UL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2);
- clks[IMX6UL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
- clks[IMX6UL_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "ahb", base + 0x74, 4);
+ if (clk_on_imx6ul()) {
+ clks[IMX6UL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
+ clks[IMX6UL_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "ahb", base + 0x74, 4);
+ } else if (clk_on_imx6ull()) {
+ clks[IMX6ULL_CLK_EPDC_ACLK] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4);
+ clks[IMX6ULL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4);
+ }
clks[IMX6UL_CLK_UART6_IPG] = imx_clk_gate2("uart6_ipg", "ipg", base + 0x74, 6);
clks[IMX6UL_CLK_UART6_SERIAL] = imx_clk_gate2("uart6_serial", "uart_podf", base + 0x74, 6);
clks[IMX6UL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10);
@@ -343,8 +387,10 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6UL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
clks[IMX6UL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
clks[IMX6UL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clks[IMX6UL_CLK_SIM1] = imx_clk_gate2("sim1", "sim_sel", base + 0x80, 6);
- clks[IMX6UL_CLK_SIM2] = imx_clk_gate2("sim2", "sim_sel", base + 0x80, 8);
+ if (clk_on_imx6ul()) {
+ clks[IMX6UL_CLK_SIM1] = imx_clk_gate2("sim1", "sim_sel", base + 0x80, 6);
+ clks[IMX6UL_CLK_SIM2] = imx_clk_gate2("sim2", "sim_sel", base + 0x80, 8);
+ }
clks[IMX6UL_CLK_EIM] = imx_clk_gate2("eim", "eim_slow_podf", base + 0x80, 10);
clks[IMX6UL_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
clks[IMX6UL_CLK_UART8_IPG] = imx_clk_gate2("uart8_ipg", "ipg", base + 0x80, 14);
@@ -397,7 +443,12 @@ static int imx6_ccm_probe(struct device_d *dev)
}
clk_set_parent(clks[IMX6UL_CLK_CAN_SEL], clks[IMX6UL_CLK_PLL3_60M]);
- clk_set_parent(clks[IMX6UL_CLK_SIM_PRE_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
+ if (clk_on_imx6ul())
+ clk_set_parent(clks[IMX6UL_CLK_SIM_PRE_SEL],
+ clks[IMX6UL_CLK_PLL3_USB_OTG]);
+ else if (clk_on_imx6ull())
+ clk_set_parent(clks[IMX6ULL_CLK_EPDC_PRE_SEL],
+ clks[IMX6UL_CLK_PLL3_PFD2]);
clk_set_parent(clks[IMX6UL_CLK_ENFC_SEL], clks[IMX6UL_CLK_PLL2_PFD2]);
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/3] ARCH: ARM: Add support for phytec-phycore-imx6ull
2017-05-11 9:09 [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support Stefan Riedmueller
2017-05-11 9:09 ` [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull Stefan Riedmueller
@ 2017-05-11 9:09 ` Stefan Riedmueller
2017-05-17 6:49 ` [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support Sascha Hauer
2 siblings, 0 replies; 7+ messages in thread
From: Stefan Riedmueller @ 2017-05-11 9:09 UTC (permalink / raw)
To: barebox
Created imx6ull devicetree to support Phytec phyCORE-i.MX6ULL.
- 256 MB RAM
- 128 MB NAND
- 10/100 Mbit Ethernet
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
| 9 ++
arch/arm/boards/phytec-som-imx6/lowlevel.c | 7 +-
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx6ul-phytec-phycore-som.dts | 146 +----------------
arch/arm/dts/imx6ul-phytec-phycore-som.dtsi | 178 +++++++++++++++++++++
arch/arm/dts/imx6ull-phytec-phycore-som.dts | 41 +++++
images/Makefile.imx | 5 +
7 files changed, 241 insertions(+), 148 deletions(-)
create mode 100644 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg
create mode 100644 arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
create mode 100644 arch/arm/dts/imx6ull-phytec-phycore-som.dts
--git a/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg
new file mode 100644
index 0000000..4a827e4
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg
@@ -0,0 +1,9 @@
+
+#define SETUP_MDCFG0 \
+ wm 32 0x021B000C 0x676B52F3
+
+#define SETUP_MDASP_MDCTL \
+ wm 32 0x021B0040 0x00000047; \
+ wm 32 0x021B0000 0x83180000
+
+#include "flash-header-phytec-pcl063.h"
diff --git a/arch/arm/boards/phytec-som-imx6/lowlevel.c b/arch/arm/boards/phytec-som-imx6/lowlevel.c
index 3ab88f4..07ac443 100644
--- a/arch/arm/boards/phytec-som-imx6/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx6/lowlevel.c
@@ -54,7 +54,8 @@ static void __noreturn start_imx6_phytec_common(uint32_t size,
int cpu_type = __imx6_cpu_type();
void *fdt;
- if (cpu_type == IMX6_CPUTYPE_IMX6UL) {
+ if (cpu_type == IMX6_CPUTYPE_IMX6UL
+ || cpu_type == IMX6_CPUTYPE_IMX6ULL) {
arm_cpu_lowlevel_init();
/* OCRAM Free Area is 0x00907000 to 0x00918000 (68KB) */
arm_setup_stack(0x00910000 - 8);
@@ -69,7 +70,8 @@ static void __noreturn start_imx6_phytec_common(uint32_t size,
fdt = fdt_blob_fixed_offset - get_runtime_offset();
- if (cpu_type == IMX6_CPUTYPE_IMX6UL)
+ if (cpu_type == IMX6_CPUTYPE_IMX6UL
+ || cpu_type == IMX6_CPUTYPE_IMX6ULL)
barebox_arm_entry(0x80000000, size, fdt);
else
barebox_arm_entry(0x10000000, size, fdt);
@@ -111,3 +113,4 @@ PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_1gib, imx6q_phytec_phycore_som_
PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_2gib, imx6q_phytec_phycore_som_emmc, SZ_2G, true);
PHYTEC_ENTRY(start_phytec_phycore_imx6ul_som_512mb, imx6ul_phytec_phycore_som, SZ_512M, false);
+PHYTEC_ENTRY(start_phytec_phycore_imx6ull_som_256mb, imx6ull_phytec_phycore_som, SZ_256M, false);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 2342d35..ec291ce 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -53,7 +53,8 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \
imx6q-phytec-phycore-som-emmc.dtb.o \
imx6dl-phytec-phycore-som-nand.dtb.o \
imx6dl-phytec-phycore-som-emmc.dtb.o \
- imx6ul-phytec-phycore-som.dtb.o
+ imx6ul-phytec-phycore-som.dtb.o \
+ imx6ull-phytec-phycore-som.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dts b/arch/arm/dts/imx6ul-phytec-phycore-som.dts
index 65a9365..73f7dbe 100644
--- a/arch/arm/dts/imx6ul-phytec-phycore-som.dts
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dts
@@ -13,173 +13,29 @@
/dts-v1/;
#include <arm/imx6ul.dtsi>
+#include "imx6ul-phytec-phycore-som.dtsi"
/ {
model = "Phytec phyCORE-i.MX6 Ultra Lite SOM";
compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
-
- chosen {
- linux,stdout-path = &uart1;
-
- environment-nand {
- compatible = "barebox,environment";
- device-path = &gpmi, "partname:barebox-environment";
- status = "disabled";
- };
-
- environment-sd1 {
- compatible = "barebox,environment";
- device-path = &usdhc1, "partname:barebox-environment";
- status = "disabled";
- };
- };
};
&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-handle = <ðphy0>;
status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- };
- };
};
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
- fsl,no-blockmark-swap;
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "barebox-environment";
- reg = <0x400000 0x100000>;
- };
-
- partition@500000 {
- label = "root";
- reg = <0x500000 0x0>;
- };
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_i2c1>;
- clock-frequency = <100000>;
status = "okay";
-
- eeprom@52 {
- compatible = "cat,24c32";
- reg = <0x52>;
- };
};
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0xe0000>;
- };
-
- partition@e0000 {
- label = "barebox-environment";
- reg = <0xe0000 0x20000>;
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
-
- imx6ul-phytec-phycore-som {
-
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
- MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
- MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
- MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
- MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
- MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
- MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
- MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
- MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
- MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
- MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
- MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
- MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
- MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
- MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
- MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
- >;
- };
-
- pinctrl_i2c1: i2cgrp {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
- >;
- };
- };
};
diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
new file mode 100644
index 0000000..96beef4
--- /dev/null
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ chosen {
+ linux,stdout-path = &uart1;
+
+ environment-nand {
+ compatible = "barebox,environment";
+ device-path = &gpmi, "partname:barebox-environment";
+ status = "disabled";
+ };
+
+ environment-sd1 {
+ compatible = "barebox,environment";
+ device-path = &usdhc1, "partname:barebox-environment";
+ status = "disabled";
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ fsl,no-blockmark-swap;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "barebox-environment";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "root";
+ reg = <0x500000 0x0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+
+ eeprom@52 {
+ compatible = "cat,24c32";
+ reg = <0x52>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "disabled";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ imx6ul-phytec-phycore-som {
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2cgrp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
+ >;
+ };
+ };
+};
diff --git a/arch/arm/dts/imx6ull-phytec-phycore-som.dts b/arch/arm/dts/imx6ull-phytec-phycore-som.dts
new file mode 100644
index 0000000..de04132
--- /dev/null
+++ b/arch/arm/dts/imx6ull-phytec-phycore-som.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <arm/imx6ull.dtsi>
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+ model = "Phytec phyCORE-i.MX6 ULL SOM";
+ compatible = "phytec,imx6ul-pcl063", "fsl,imx6ull";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
diff --git a/images/Makefile.imx b/images/Makefile.imx
index cdad2e0..6ee44f2 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -435,6 +435,11 @@ CFG_start_phytec_phycore_imx6ul_som_512mb.pblx.imximg = $(board)/phytec-som-imx6
FILE_barebox-phytec-phycore-imx6ul-512mb.img = start_phytec_phycore_imx6ul_som_512mb.pblx.imximg
image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ul-512mb.img
+pblx-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ull_som_256mb
+CFG_start_phytec_phycore_imx6ull_som_256mb.pblx.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg
+FILE_barebox-phytec-phycore-imx6ull-256mb.img = start_phytec_phycore_imx6ull_som_256mb.pblx.imximg
+image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ull-256mb.img
+
pblx-$(CONFIG_MACH_GW_VENTANA) += start_imx6q_gw54xx_1gx64
CFG_start_imx6q_gw54xx_1gx64.pblx.imximg = $(board)/gateworks-ventana/flash-header-ventana-quad-1gx64.imxcfg
FILE_barebox-gateworks-imx6q-ventana-1gx64.img = start_imx6q_gw54xx_1gx64.pblx.imximg
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread