From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.4.pengutronix.de ([92.198.50.35]) by casper.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dJKiX-0008Nk-2B for barebox@lists.infradead.org; Fri, 09 Jun 2017 14:16:50 +0000 From: Oleksij Rempel Date: Fri, 9 Jun 2017 16:16:22 +0200 Message-Id: <20170609141622.21502-1-o.rempel@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states To: kernel@pengutronix.de, Linus Walleij , Alexandre Courbot , Rob Herring , Mark Rutland , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, barebox@lists.infradead.org Cc: Oleksij Rempel This property is needed for barebox or may be other bootloaders to set proper gpio configuration as early as possible. This example is mainly based on "lines-initial-states" property from this binding documentation: Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt Signed-off-by: Oleksij Rempel --- Documentation/devicetree/bindings/gpio/gpio.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index 84ede036f73d..60f8e8d8ab32 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -181,6 +181,26 @@ gpio-controller@00000000 { "poweroff", "reset"; } +Optionally, a GPIO controller may have a "gpio-lines-initial-states" property. +This is an array of values that specifies the initial state of each line. When +a value is set to one, the corresponding line will be initialized to the input +(pulled-up) state. When the values is set to two, the line will be initialized +the low-level output state. If values is set to zero the line will be +initialized to the input state. +If the property is not specified no specific configuration will be set. Driver +should reuse HW configuration provided by bootloader or other system. + +Example: + +gpio-controller@00000000 { + compatible = "foo"; + reg = <0x00000000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <9>; + gpio-lines-initial-states = <0>, <1>, <2>, <0>, <0>, <2>, <2>, <1>, <1>; +} + The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. -- 2.11.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox