mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, l.stach@pengutronix.de
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v1 3/3] regulator: pfuze: provide power over standby handler
Date: Thu,  6 Jul 2017 16:00:42 +0200	[thread overview]
Message-ID: <20170706140042.5029-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20170706140042.5029-1-o.rempel@pengutronix.de>

This patch is providing an optional power off handler
which will configure standby state of the PMIC to disable all power lines.

In my power consumption test on RIoTBoard, I got the following results:
power off without this patch:   320 mA
power off with this patch:      2   mA
suspend to ram:                 40  mA

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/regulator/pfuze.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/drivers/regulator/pfuze.c b/drivers/regulator/pfuze.c
index 2a5fb715ce..94fa03ff15 100644
--- a/drivers/regulator/pfuze.c
+++ b/drivers/regulator/pfuze.c
@@ -26,10 +26,53 @@
 
 #include <i2c/i2c.h>
 
+#include <poweroff.h>
+#include <mach/imx6.h>
+
 #define DRIVERNAME		"pfuze"
 
 #define MC13XXX_NUMREGS		0x3f
 
+#define PFUZE_NUMREGS		128
+#define PFUZE100_VOL_OFFSET	0
+#define PFUZE100_STANDBY_OFFSET	1
+#define PFUZE100_MODE_OFFSET	3
+#define PFUZE100_CONF_OFFSET	4
+
+#define PFUZE100_DEVICEID	0x0
+#define PFUZE100_REVID		0x3
+#define PFUZE100_FABID		0x4
+
+#define PFUZE100_COINVOL	0x1a
+#define PFUZE100_SW1ABVOL	0x20
+#define PFUZE100_SW1ABMODE	0x23
+#define PFUZE100_SW1CVOL	0x2e
+#define PFUZE100_SW1CMODE	0x31
+#define PFUZE100_SW2VOL		0x35
+#define PFUZE100_SW2MODE	0x38
+#define PFUZE100_SW3AVOL	0x3c
+#define PFUZE100_SW3AMODE	0x3f
+#define PFUZE100_SW3BVOL	0x43
+#define PFUZE100_SW3BMODE	0x46
+#define PFUZE100_SW4VOL		0x4a
+#define PFUZE100_SW4MODE	0x4d
+#define PFUZE100_SWBSTCON1	0x66
+#define PFUZE100_VREFDDRCON	0x6a
+#define PFUZE100_VSNVSVOL	0x6b
+#define PFUZE100_VGEN1VOL	0x6c
+#define PFUZE100_VGEN2VOL	0x6d
+#define PFUZE100_VGEN3VOL	0x6e
+#define PFUZE100_VGEN4VOL	0x6f
+#define PFUZE100_VGEN5VOL	0x70
+#define PFUZE100_VGEN6VOL	0x71
+
+#define PFUZE100_SWxMODE_MASK	0xf
+#define PFUZE100_SWxMODE_APS_APS	0x8
+#define PFUZE100_SWxMODE_APS_OFF	0x4
+
+#define PFUZE100_VGENxLPWR	BIT(6)
+#define PFUZE100_VGENxSTBY	BIT(5)
+
 struct pfuze {
 	struct device_d			*dev;
 	struct regmap			*map;
@@ -85,6 +128,46 @@ static int pfuze_i2c_reg_write(void *ctx, unsigned int reg, unsigned int val)
 	return ret == 1 ? 0 : ret;
 }
 
+static void pfuze_power_off_prepare(struct poweroff_handler *handler)
+{
+	dev_info(pfuze_dev->dev, "Configure standy mode for power off");
+
+	/* Switch from default mode: APS/APS to APS/Off */
+	regmap_write_bits(pfuze_dev->map, PFUZE100_SW1ABMODE,
+			  PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_SW1CMODE,
+			  PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_SW2MODE,
+			  PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_SW3AMODE,
+			  PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_SW3BMODE,
+			  PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_SW4MODE,
+			  PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+
+	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN1VOL,
+			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			  PFUZE100_VGENxSTBY);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN2VOL,
+			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			  PFUZE100_VGENxSTBY);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN3VOL,
+			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			  PFUZE100_VGENxSTBY);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN4VOL,
+			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			  PFUZE100_VGENxSTBY);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN5VOL,
+			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			  PFUZE100_VGENxSTBY);
+	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN6VOL,
+			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			  PFUZE100_VGENxSTBY);
+
+	imx6_pm_stby_poweroff();
+}
+
 static struct regmap_bus regmap_pfuze_i2c_bus = {
 	.reg_write = pfuze_i2c_reg_write,
 	.reg_read = pfuze_i2c_reg_read,
@@ -122,6 +205,10 @@ static int __init pfuze_probe(struct device_d *dev)
 	if (pfuze_init_callback)
 		pfuze_init_callback(pfuze_dev->map);
 
+	if (of_property_read_bool(dev->device_node,
+				  "fsl,pmic-stby-poweroff"))
+		return poweroff_handler_register_fn(pfuze_power_off_prepare);
+
 	return 0;
 }
 
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-07-06 14:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-06 14:00 [PATCH v1 1/3] ARM: riotboard: provide standby on power off option Oleksij Rempel
2017-07-06 14:00 ` [PATCH v1 2/3] ARM: i.MX: provide handler for power off over standby Oleksij Rempel
2017-07-06 14:00 ` Oleksij Rempel [this message]
2017-07-06 14:12   ` [PATCH v1 3/3] regulator: pfuze: provide power over standby handler Lucas Stach
2017-07-06 16:34     ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170706140042.5029-3-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=l.stach@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox