From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dT7Lz-0005SU-Vn for barebox@lists.infradead.org; Thu, 06 Jul 2017 14:02:07 +0000 From: Oleksij Rempel Date: Thu, 6 Jul 2017 16:00:42 +0200 Message-Id: <20170706140042.5029-3-o.rempel@pengutronix.de> In-Reply-To: <20170706140042.5029-1-o.rempel@pengutronix.de> References: <20170706140042.5029-1-o.rempel@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v1 3/3] regulator: pfuze: provide power over standby handler To: barebox@lists.infradead.org, l.stach@pengutronix.de Cc: Oleksij Rempel This patch is providing an optional power off handler which will configure standby state of the PMIC to disable all power lines. In my power consumption test on RIoTBoard, I got the following results: power off without this patch: 320 mA power off with this patch: 2 mA suspend to ram: 40 mA Signed-off-by: Oleksij Rempel --- drivers/regulator/pfuze.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/drivers/regulator/pfuze.c b/drivers/regulator/pfuze.c index 2a5fb715ce..94fa03ff15 100644 --- a/drivers/regulator/pfuze.c +++ b/drivers/regulator/pfuze.c @@ -26,10 +26,53 @@ #include +#include +#include + #define DRIVERNAME "pfuze" #define MC13XXX_NUMREGS 0x3f +#define PFUZE_NUMREGS 128 +#define PFUZE100_VOL_OFFSET 0 +#define PFUZE100_STANDBY_OFFSET 1 +#define PFUZE100_MODE_OFFSET 3 +#define PFUZE100_CONF_OFFSET 4 + +#define PFUZE100_DEVICEID 0x0 +#define PFUZE100_REVID 0x3 +#define PFUZE100_FABID 0x4 + +#define PFUZE100_COINVOL 0x1a +#define PFUZE100_SW1ABVOL 0x20 +#define PFUZE100_SW1ABMODE 0x23 +#define PFUZE100_SW1CVOL 0x2e +#define PFUZE100_SW1CMODE 0x31 +#define PFUZE100_SW2VOL 0x35 +#define PFUZE100_SW2MODE 0x38 +#define PFUZE100_SW3AVOL 0x3c +#define PFUZE100_SW3AMODE 0x3f +#define PFUZE100_SW3BVOL 0x43 +#define PFUZE100_SW3BMODE 0x46 +#define PFUZE100_SW4VOL 0x4a +#define PFUZE100_SW4MODE 0x4d +#define PFUZE100_SWBSTCON1 0x66 +#define PFUZE100_VREFDDRCON 0x6a +#define PFUZE100_VSNVSVOL 0x6b +#define PFUZE100_VGEN1VOL 0x6c +#define PFUZE100_VGEN2VOL 0x6d +#define PFUZE100_VGEN3VOL 0x6e +#define PFUZE100_VGEN4VOL 0x6f +#define PFUZE100_VGEN5VOL 0x70 +#define PFUZE100_VGEN6VOL 0x71 + +#define PFUZE100_SWxMODE_MASK 0xf +#define PFUZE100_SWxMODE_APS_APS 0x8 +#define PFUZE100_SWxMODE_APS_OFF 0x4 + +#define PFUZE100_VGENxLPWR BIT(6) +#define PFUZE100_VGENxSTBY BIT(5) + struct pfuze { struct device_d *dev; struct regmap *map; @@ -85,6 +128,46 @@ static int pfuze_i2c_reg_write(void *ctx, unsigned int reg, unsigned int val) return ret == 1 ? 0 : ret; } +static void pfuze_power_off_prepare(struct poweroff_handler *handler) +{ + dev_info(pfuze_dev->dev, "Configure standy mode for power off"); + + /* Switch from default mode: APS/APS to APS/Off */ + regmap_write_bits(pfuze_dev->map, PFUZE100_SW1ABMODE, + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); + regmap_write_bits(pfuze_dev->map, PFUZE100_SW1CMODE, + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); + regmap_write_bits(pfuze_dev->map, PFUZE100_SW2MODE, + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); + regmap_write_bits(pfuze_dev->map, PFUZE100_SW3AMODE, + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); + regmap_write_bits(pfuze_dev->map, PFUZE100_SW3BMODE, + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); + regmap_write_bits(pfuze_dev->map, PFUZE100_SW4MODE, + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); + + regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN1VOL, + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, + PFUZE100_VGENxSTBY); + regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN2VOL, + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, + PFUZE100_VGENxSTBY); + regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN3VOL, + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, + PFUZE100_VGENxSTBY); + regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN4VOL, + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, + PFUZE100_VGENxSTBY); + regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN5VOL, + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, + PFUZE100_VGENxSTBY); + regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN6VOL, + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, + PFUZE100_VGENxSTBY); + + imx6_pm_stby_poweroff(); +} + static struct regmap_bus regmap_pfuze_i2c_bus = { .reg_write = pfuze_i2c_reg_write, .reg_read = pfuze_i2c_reg_read, @@ -122,6 +205,10 @@ static int __init pfuze_probe(struct device_d *dev) if (pfuze_init_callback) pfuze_init_callback(pfuze_dev->map); + if (of_property_read_bool(dev->device_node, + "fsl,pmic-stby-poweroff")) + return poweroff_handler_register_fn(pfuze_power_off_prepare); + return 0; } -- 2.11.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox