From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from asavdk3.altibox.net ([109.247.116.14]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dTS5d-0005vN-6K for barebox@lists.infradead.org; Fri, 07 Jul 2017 12:10:33 +0000 Date: Fri, 7 Jul 2017 14:10:00 +0200 From: Sam Ravnborg Message-ID: <20170707121000.GA16920@ravnborg.org> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v2 0/23] at91: move reset vector to board code To: Barebox List Cc: Sam Ravnborg The following patchset moves the reset vector for at91 boards from mach-at91 to board code. This is similar to what other boards do and is done to prepare for multi-image and DT support. The patchset convert all boards and thus clean up the old code that resided in mach-at91/ The first patch have minimal impact, but prepares for a board-by-board conversion. All temporary CONFIG symbols are gone at the end of this series. I kept Jean-Christophe PLAGNIOL-VILLARD and others copyright in all the created files and did not add copyright myself. The patchset does IMO not add any copyrightable material from my side as this is in reality just moving around code. The patchset was successfully booted on a AT91SAM9263EK, and all defconfigs was built (expect the ones that failed to build before this patchset was applied). Changes v1 => v2 - converted all boards over - fixed author info Sam Sam Ravnborg (23): at91: refactor lowlevel_init selection at91: drop unused at91sam9x5_lowlevel_init.c at91sam9263ek: move reset vector to board code at91sam9261ek, at91sam9g10ek: move reset vector to board code pm9261: move reset vector to board code at91: drop unused at91sam9261_lowlevel_init mmccpu: move reset vector to board code pm9263: move reset vector to board code usb-a926x: move reset vector to board code at91: delete at91sam926x_lowlevel_init tny-a926x: move reset vector to board code qil-a926x: move reset vector to board code haba-knx: move reset vector to board code at91: delete unused at91sam9263_lowlevel_init.c sama5d{3,4}{xek,xplained}: move reset vector to board code at91sam{9260,9G20,9m10g45,9n12}ek: move reset vector to board code at91rm9200ek: move reset vector to board code at91sam9m10ihd: move reset vector to board code pm9g45: move reset vector to board code animeo: move reset vector to board code dss11: move reset vector to board code telit-evk-pro3: move reset vector to board code at91: remove leftovers from reset code in mach-at91 arch/arm/boards/animeo_ip/Makefile | 1 + arch/arm/boards/animeo_ip/lowlevel.c | 26 ++++ arch/arm/boards/at91rm9200ek/Makefile | 1 + .../at91rm9200ek/lowlevel.c} | 16 +-- arch/arm/boards/at91sam9260ek/Makefile | 1 + arch/arm/boards/at91sam9260ek/lowlevel.c | 26 ++++ arch/arm/boards/at91sam9261ek/Makefile | 2 +- arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 +++++-- arch/arm/boards/at91sam9263ek/Makefile | 2 +- arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 +++++-- arch/arm/boards/at91sam9m10g45ek/Makefile | 1 + .../at91sam9m10g45ek/lowlevel.c} | 11 +- arch/arm/boards/at91sam9m10ihd/Makefile | 2 + .../at91sam9m10ihd/lowlevel.c} | 19 ++- arch/arm/boards/at91sam9n12ek/Makefile | 1 + .../at91sam9n12ek/lowlevel.c} | 13 +- arch/arm/boards/dss11/Makefile | 1 + arch/arm/boards/dss11/lowlevel.c | 26 ++++ arch/arm/boards/haba-knx/Makefile | 3 + arch/arm/boards/haba-knx/lowlevel.c | 26 ++++ arch/arm/boards/mmccpu/Makefile | 2 +- arch/arm/boards/mmccpu/lowlevel.c | 26 ++++ arch/arm/boards/mmccpu/lowlevel_init.c | 135 --------------------- arch/arm/boards/pm9261/Makefile | 2 +- arch/arm/boards/pm9261/lowlevel_init.c | 39 ++++-- arch/arm/boards/pm9263/Makefile | 2 +- arch/arm/boards/pm9263/lowlevel_init.c | 43 +++++-- arch/arm/boards/pm9g45/Makefile | 1 + arch/arm/boards/pm9g45/lowlevel.c | 24 ++++ arch/arm/boards/qil-a926x/Makefile | 3 + arch/arm/boards/qil-a926x/lowlevel.c | 26 ++++ arch/arm/boards/sama5d3_xplained/Makefile | 1 + .../sama5d3_xplained/lowlevel.c} | 10 +- arch/arm/boards/sama5d3xek/Makefile | 1 + arch/arm/boards/sama5d3xek/lowlevel.c | 23 ++++ arch/arm/boards/sama5d4_xplained/Makefile | 1 + arch/arm/boards/sama5d4_xplained/lowlevel.c | 23 ++++ arch/arm/boards/sama5d4ek/Makefile | 1 + arch/arm/boards/sama5d4ek/lowlevel.c | 23 ++++ arch/arm/boards/telit-evk-pro3/Makefile | 1 + arch/arm/boards/telit-evk-pro3/lowlevel.c | 26 ++++ arch/arm/boards/tny-a926x/Makefile | 9 +- arch/arm/boards/tny-a926x/tny_a9260_lowlevel.c | 26 ++++ arch/arm/boards/tny-a926x/tny_a9263_lowlevel.c | 26 ++++ .../arm/boards/tny-a926x/tny_a9263_lowlevel_init.c | 107 ---------------- arch/arm/boards/usb-a926x/Makefile | 8 +- arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c | 26 ++++ ..._a9263_lowlevel_init.c => usb_a9263_lowlevel.c} | 43 +++++-- arch/arm/mach-at91/Kconfig | 22 ++-- arch/arm/mach-at91/Makefile | 12 -- arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 48 -------- arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 48 -------- arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 48 -------- .../mach-at91/include/mach/at91_lowlevel_init.h | 46 ------- .../mach/at91sam926x_board_init.h} | 63 ++++++---- 55 files changed, 622 insertions(+), 585 deletions(-) _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox