From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from asavdk4.altibox.net ([109.247.116.15]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dTS8L-0006dP-Mg for barebox@lists.infradead.org; Fri, 07 Jul 2017 12:13:21 +0000 From: Sam Ravnborg Date: Fri, 7 Jul 2017 14:12:20 +0200 Message-Id: <20170707121242.18499-1-sam@ravnborg.org> In-Reply-To: <20170707121000.GA16920@ravnborg.org> References: <20170707121000.GA16920@ravnborg.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 01/23] at91: refactor lowlevel_init selection To: Barebox List Cc: Sam Ravnborg Push selection of lowlevel_init functions out to the individual boards. Pushing it to the individual boards allows us on a per board basis to migrate to a design where the mach-at91 code no longer calls the board specific code. When the dependency mach-at91 => boards is dropped for a board the migration to a multi-image setup is one step closer. Signed-off-by: Sam Ravnborg --- arch/arm/boards/at91sam9261ek/Makefile | 2 +- arch/arm/boards/at91sam9263ek/Makefile | 2 +- arch/arm/boards/mmccpu/Makefile | 2 +- arch/arm/boards/pm9261/Makefile | 2 +- arch/arm/boards/pm9263/Makefile | 2 +- arch/arm/boards/tny-a926x/Makefile | 8 +-- arch/arm/boards/usb-a926x/Makefile | 6 +- arch/arm/mach-at91/Kconfig | 81 ++++++++++++++++++---- arch/arm/mach-at91/Makefile | 24 +++---- .../mach-at91/include/mach/at91_lowlevel_init.h | 2 +- 10 files changed, 91 insertions(+), 40 deletions(-) diff --git a/arch/arm/boards/at91sam9261ek/Makefile b/arch/arm/boards/at91sam9261ek/Makefile index 1764da93f..667095ae4 100644 --- a/arch/arm/boards/at91sam9261ek/Makefile +++ b/arch/arm/boards/at91sam9261ek/Makefile @@ -1,4 +1,4 @@ obj-y += init.o -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o +lwl-$(CONFIG_AT91SAM926X_LWL) += lowlevel_init.o bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9261ek diff --git a/arch/arm/boards/at91sam9263ek/Makefile b/arch/arm/boards/at91sam9263ek/Makefile index 2072cd416..de4d75690 100644 --- a/arch/arm/boards/at91sam9263ek/Makefile +++ b/arch/arm/boards/at91sam9263ek/Makefile @@ -1,4 +1,4 @@ obj-y += init.o -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o +lwl-y += lowlevel_init.o bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9263ek diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile index 1398c26a0..a34efd541 100644 --- a/arch/arm/boards/mmccpu/Makefile +++ b/arch/arm/boards/mmccpu/Makefile @@ -1,3 +1,3 @@ obj-y += init.o -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o +lwl-n += lowlevel_init.o diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile index bff467b1d..e9bf1212f 100644 --- a/arch/arm/boards/pm9261/Makefile +++ b/arch/arm/boards/pm9261/Makefile @@ -1,4 +1,4 @@ obj-y += init.o -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o +lwl-y += lowlevel_init.o bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-pm9261 diff --git a/arch/arm/boards/pm9263/Makefile b/arch/arm/boards/pm9263/Makefile index 1398c26a0..68bfbfa92 100644 --- a/arch/arm/boards/pm9263/Makefile +++ b/arch/arm/boards/pm9263/Makefile @@ -1,3 +1,3 @@ obj-y += init.o -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o +lwl-y += lowlevel_init.o diff --git a/arch/arm/boards/tny-a926x/Makefile b/arch/arm/boards/tny-a926x/Makefile index dba2f8cfc..5dee09a11 100644 --- a/arch/arm/boards/tny-a926x/Makefile +++ b/arch/arm/boards/tny-a926x/Makefile @@ -1,9 +1,7 @@ obj-y += init.o -bootstrap-$(CONFIG_MACH_TNY_A9263) = tny_a9263_bootstrap.o -obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y) +obj-$(CONFIG_AT91_BOOTSTRAP) += tny_a9263_bootstrap.o -lowlevel_init-$(CONFIG_MACH_TNY_A9263) = tny_a9263_lowlevel_init.o - -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += $(lowlevel_init-y) +# Not used, documented by an -n assignment +lwl-n += tny_a9263_lowlevel_init.o bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-tny-a926x diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile index 4f09581e3..a4eae1844 100644 --- a/arch/arm/boards/usb-a926x/Makefile +++ b/arch/arm/boards/usb-a926x/Makefile @@ -1,9 +1,7 @@ obj-y += init.o -bootstrap-$(CONFIG_MACH_USB_A9263) = usb_a9263_bootstrap.o -obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y) +obj-$(CONFIG_AT91_BOOTSTRAP) += usb_a9263_bootstrap.o -lowlevel_init-$(CONFIG_MACH_USB_A9263) = usb_a9263_lowlevel_init.o +lwl-$(CONFIG_AT91SAM926X_LWL) += usb_a9263_lowlevel_init.o -lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += $(lowlevel_init-y) bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-usb-a926x diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 9db53b226..37907b217 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -29,7 +29,33 @@ config HAVE_AT91_H32MX config HAVE_AT91_GENERATED_CLK bool -config HAVE_AT91_LOWLEVEL_INIT +# Select if board support bootstrap +config HAVE_AT91_BOOTSTRAP + bool + +# Select is board uses the common at91sam926x_lowlevel_init +config AT91SAM926X_LWL + bool + +# Select if board uses barebox reset vector from mach-at91 +# as implemented in the *lowlevel_init.c files +config AT91SAM9260_LWL + bool +config AT91SAM9261_LWL + bool +config AT91SAM9263_LWL + bool +config AT91SAM9G45_LWL + bool +config AT91SAM9X5_LWL + bool +config AT91SAM9N12_LWL + bool +config AT91RM9200_LWL + bool +config SAMA5D3_LWL + bool +config SAMA5D4_LWL bool config AT91SAM9_SMC @@ -71,9 +97,6 @@ config AT91SAM9G45_RESET config HAVE_AT91_LOAD_BAREBOX_SRAM bool -config AT91SAM9_LOWLEVEL_INIT - bool - comment "Atmel AT91 System-on-Chip" config SOC_AT91RM9200 @@ -88,7 +111,6 @@ config SOC_AT91SAM9260 select HAVE_AT91_DBGU0 select HAS_MACB select AT91SAM9_RESET - select AT91SAM9_LOWLEVEL_INIT help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE or AT91SAM9G20 SoC. @@ -98,7 +120,6 @@ config SOC_AT91SAM9261 select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select AT91SAM9_RESET - select AT91SAM9_LOWLEVEL_INIT help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. @@ -108,7 +129,6 @@ config SOC_AT91SAM9263 select HAVE_AT91_DBGU1 select HAS_MACB select AT91SAM9_RESET - select AT91SAM9_LOWLEVEL_INIT select HAVE_AT91_LOAD_BAREBOX_SRAM config SOC_AT91SAM9G45 @@ -239,6 +259,7 @@ choice config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD + select AT91RM9200_LWL help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. @@ -256,15 +277,18 @@ choice config MACH_ANIMEO_IP bool "Somfy Animeo IP" + select AT91SAM9260_LWL config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK" select HAVE_NAND_ATMEL_BUSWIDTH_16 + select AT91SAM9260_LWL help Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" + select AT91SAM9260_LWL help Select this if you are using a Calao Systems QIL-A9260 Board. @@ -272,6 +296,7 @@ config MACH_QIL_A9260 config MACH_TNY_A9260 bool "CALAO TNY-A9260" select SUPPORT_CALAO_MOB_TNY_MD2 + select AT91SAM9260_LWL help Select this if you are using a Calao Systems TNY-A9260. @@ -279,12 +304,14 @@ config MACH_TNY_A9260 config MACH_USB_A9260 bool "CALAO USB-A9260" select SUPPORT_CALAO_DAB_MMX + select AT91SAM9260_LWL help Select this if you are using a Calao Systems USB-A9260. config MACH_GE863 bool "Telit EVK-PRO3" + select AT91SAM9260_LWL help Say y here if you are using Telit EVK-PRO3 with GE863-PRO3 @@ -305,7 +332,9 @@ config MACH_AT91SAM9261EK select HAS_DM9000 select HAVE_AT91_DATAFLASH_CARD select HAVE_NAND_ATMEL_BUSWIDTH_16 - select HAVE_AT91_LOWLEVEL_INIT + select HAVE_AT91_BOOTSTRAP + select AT91SAM9261_LWL + select AT91SAM926X_LWL help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. @@ -313,7 +342,9 @@ config MACH_AT91SAM9261EK config MACH_PM9261 bool "Ronetix PM9261" select HAS_DM9000 - select HAVE_AT91_LOWLEVEL_INIT + select HAVE_AT91_BOOTSTRAP + select AT91SAM9261_LWL + select AT91SAM926X_LWL help Say y here if you are using the Ronetix PM9261 Board @@ -332,6 +363,7 @@ config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 select HAS_DM9000 + select AT91SAM9261_LWL help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. @@ -350,6 +382,7 @@ choice config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 + select AT91SAM9260_LWL help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -357,6 +390,7 @@ config MACH_AT91SAM9G20EK config MACH_TNY_A9G20 select SUPPORT_CALAO_MOB_TNY_MD2 bool "CALAO TNY-A9G20" + select AT91SAM9260_LWL help Select this if you are using a Calao Systems TNY-A9G20. @@ -364,6 +398,7 @@ config MACH_TNY_A9G20 config MACH_USB_A9G20 bool "CALAO USB-A9G20" select SUPPORT_CALAO_DAB_MMX + select AT91SAM9260_LWL help Select this if you are using a Calao Systems USB-A9G20. @@ -371,18 +406,21 @@ config MACH_USB_A9G20 config MACH_DSS11 bool "aizo dSS11" select HAVE_NAND_ATMEL_BUSWIDTH_16 + select AT91SAM9260_LWL help Select this if you are using aizo dSS11 that embeds only one SD/MMC slot. config MACH_QIL_A9G20 bool "CALAO QIL-A9G20 board" + select AT91SAM9260_LWL help Select this if you are using a Calao Systems QIL-A9G20 Board. config MACH_HABA_KNX_LITE bool "CALAO HABA-KNX-LITE" + select AT91SAM9260_LWL help Select this if you are using a Calao Systems HABA-KNX-LITE. @@ -399,32 +437,41 @@ choice config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK" - select HAVE_AT91_LOWLEVEL_INIT select HAVE_NAND_ATMEL_BUSWIDTH_16 + select HAVE_AT91_BOOTSTRAP + select AT91SAM9263_LWL + select AT91SAM926X_LWL help Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board config MACH_MMCCPU bool "Bucyrus MMC-CPU" + select AT91SAM9263_LWL help Say y here if you are using the Bucyrus MMC-CPU config MACH_PM9263 bool "Ronetix PM9263" - select HAVE_AT91_LOWLEVEL_INIT + select HAVE_AT91_BOOTSTRAP + select AT91SAM9263_LWL + select AT91SAM926X_LWL help Say y here if you are using the Ronetix PM9263 Board config MACH_TNY_A9263 bool "CALAO TNY-A9263" select SUPPORT_CALAO_MOB_TNY_MD2 + select HAVE_AT91_BOOTSTRAP + select AT91SAM9263_LWL help Select this if you are using a Calao Systems TNY-A9263. config MACH_USB_A9263 bool "CALAO USB-A9263" - select HAVE_AT91_LOWLEVEL_INIT + select HAVE_AT91_BOOTSTRAP + select AT91SAM9263_LWL + select AT91SAM926X_LWL help Select this if you are using a Calao Systems USB-A9263. @@ -440,12 +487,14 @@ choice config MACH_AT91SAM9M10IHD bool "Atmel AT91SAM9M10IDH Tablet" + select AT91SAM9G45_LWL help Select this if you are using Atmel's AT91SAM9M10IHD Tablet config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 + select AT91SAM9G45_LWL help Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD) @@ -453,6 +502,7 @@ config MACH_AT91SAM9M10G45EK config MACH_PM9G45 bool "Ronetix PM9G45" + select AT91SAM9G45_LWL help Say y here if you are using the Ronetix PM9G45 Board @@ -469,6 +519,7 @@ choice config MACH_AT91SAM9N12EK bool "Atmel AT91SAM9N12 Evaluation Kit" + select AT91SAM9N12_LWL help Select this if you are using Atmel's AT91SAM9N12-EK Evaluation Kit. @@ -485,11 +536,13 @@ choice config MACH_SAMA5D3XEK bool "Atmel SAMA5D3X Evaluation Kit" + select SAMA5D3_LWL help Select this if you are using Atmel's SAMA5D3X-EK Evaluation Kit. config MACH_SAMA5D3_XPLAINED bool "Atmel SAMA5D3_XPLAINED Evaluation Kit" + select SAMA5D3_LWL help Select this if you are using Atmel's SAMA5D3_XPLAINED Evaluation Kit. @@ -506,11 +559,13 @@ choice config MACH_SAMA5D4EK bool "Atmel SAMA5D4 Evaluation Kit" + select SAMA5D4_LWL help Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit. config MACH_SAMA5D4_XPLAINED bool "Atmel SAMA5D4 XPLAINED ULTRA Evaluation Kit" + select SAMA5D4_LWL help Select this if you are using Atmel's SAMA5D4_XPLAINED ULTRA Evaluation Kit. @@ -595,7 +650,7 @@ config CALAO_MB_QIL_A9260 config AT91_BOOTSTRAP bool "at91 bootstrap" - depends on HAVE_AT91_LOWLEVEL_INIT + depends on HAVE_AT91_BOOTSTRAP select BOOTSTRAP config AT91_LOAD_BAREBOX_SRAM diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 0892fb4b5..5516b5f4f 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -7,18 +7,18 @@ endif obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o obj-$(CONFIG_AT91_BOOTSTRAP) += bootstrap.o -sam926x_lowlevel_init-$(CONFIG_AT91SAM9_LOWLEVEL_INIT) = at91sam926x_lowlevel_init.o -lowlevel_init-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) = $(sam926x_lowlevel_init-y) -lowlevel_init-$(CONFIG_SOC_AT91SAM9260) += at91sam9260_lowlevel_init.o -lowlevel_init-$(CONFIG_SOC_AT91SAM9261) += at91sam9261_lowlevel_init.o -lowlevel_init-$(CONFIG_SOC_AT91SAM9263) += at91sam9263_lowlevel_init.o -lowlevel_init-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45_lowlevel_init.o -lowlevel_init-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5_lowlevel_init.o -lowlevel_init-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12_lowlevel_init.o -lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o -lowlevel_init-$(CONFIG_ARCH_SAMA5D3) += sama5d3_lowlevel_init.o -lowlevel_init-$(CONFIG_ARCH_SAMA5D4) += sama5d3_lowlevel_init.o -lwl-y += $(lowlevel_init-y) + +lwl-$(CONFIG_AT91SAM926X_LWL) += at91sam926x_lowlevel_init.o + +lwl-$(CONFIG_AT91SAM9260_LWL) += at91sam9260_lowlevel_init.o +lwl-$(CONFIG_AT91SAM9261_LWL) += at91sam9261_lowlevel_init.o +lwl-$(CONFIG_AT91SAM9263_LWL) += at91sam9263_lowlevel_init.o +lwl-$(CONFIG_AT91SAM9G45_LWL) += at91sam9g45_lowlevel_init.o +lwl-$(CONFIG_AT91SAM9X5_LWL) += at91sam9x5_lowlevel_init.o +lwl-$(CONFIG_AT91SAM9N12_LWL) += at91sam9n12_lowlevel_init.o +lwl-$(CONFIG_AT91RM9200_LWL) += at91rm9200_lowlevel_init.o +lwl-$(CONFIG_SAMA5D3_LWL) += sama5d3_lowlevel_init.o +lwl-$(CONFIG_SAMA5D4_LWL) += sama5d3_lowlevel_init.o obj-$(CONFIG_AT91SAM9_RESET) += at91sam9_reset.o obj-$(CONFIG_AT91SAM9G45_RESET) += at91sam9g45_reset.o diff --git a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h index 6b37e49e9..d72dfff38 100644 --- a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h +++ b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h @@ -35,7 +35,7 @@ struct at91sam926x_lowlevel_cfg { u32 rstc_rmr; }; -#ifdef CONFIG_HAVE_AT91_LOWLEVEL_INIT +#ifdef CONFIG_AT91SAM926X_LWL void at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg); void at91sam926x_lowlevel_init(struct at91sam926x_lowlevel_cfg *cfg); #else -- 2.12.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox