mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 21/23] dss11: move reset vector to board code
Date: Fri,  7 Jul 2017 14:12:40 +0200	[thread overview]
Message-ID: <20170707121242.18499-21-sam@ravnborg.org> (raw)
In-Reply-To: <20170707121000.GA16920@ravnborg.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/boards/dss11/Makefile   |  1 +
 arch/arm/boards/dss11/lowlevel.c | 26 ++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig       |  1 -
 3 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/dss11/lowlevel.c

diff --git a/arch/arm/boards/dss11/Makefile b/arch/arm/boards/dss11/Makefile
index eb072c016..2da0494d4 100644
--- a/arch/arm/boards/dss11/Makefile
+++ b/arch/arm/boards/dss11/Makefile
@@ -1 +1,2 @@
 obj-y += init.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/dss11/lowlevel.c b/arch/arm/boards/dss11/lowlevel.c
new file mode 100644
index 000000000..02896856d
--- /dev/null
+++ b/arch/arm/boards/dss11/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+  */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			  at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)),
+			  NULL);
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index abbf9d4a1..73be26749 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -372,7 +372,6 @@ config MACH_USB_A9G20
 config MACH_DSS11
 	bool "aizo dSS11"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
-	select AT91SAM9260_LWL
 	help
 	  Select this if you are using aizo dSS11
 	  that embeds only one SD/MMC slot.
-- 
2.12.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-07-07 12:14 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-07 12:10 [PATCH v2 0/23] at91: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 01/23] at91: refactor lowlevel_init selection Sam Ravnborg
2017-07-07 12:12 ` [PATCH 02/23] at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2017-07-07 12:12 ` [PATCH 03/23] at91sam9263ek: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 04/23] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 05/23] pm9261: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 06/23] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2017-07-07 12:12 ` [PATCH 07/23] mmccpu: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 08/23] pm9263: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 09/23] usb-a926x: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 10/23] at91: delete at91sam926x_lowlevel_init Sam Ravnborg
2017-07-07 12:12 ` [PATCH 11/23] tny-a926x: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 12/23] qil-a926x: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 13/23] haba-knx: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 14/23] at91: delete unused at91sam9263_lowlevel_init.c Sam Ravnborg
2017-07-07 12:12 ` [PATCH 15/23] sama5d{3, 4}{xek, xplained}: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 16/23] at91sam{9260, 9G20, 9m10g45, 9n12}ek: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 17/23] at91rm9200ek: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 18/23] at91sam9m10ihd: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 19/23] pm9g45: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 20/23] animeo: " Sam Ravnborg
2017-07-07 12:12 ` Sam Ravnborg [this message]
2017-07-07 12:12 ` [PATCH 22/23] telit-evk-pro3: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 23/23] at91: remove leftovers from reset code in mach-at91 Sam Ravnborg
2017-07-17  9:52 ` [PATCH v2 0/23] at91: move reset vector to board code Lucas Stach
2017-07-17 11:41   ` Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170707121242.18499-21-sam@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox