mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Barebox List <barebox@lists.infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 07/23] mmccpu: move reset vector to board code
Date: Fri,  7 Jul 2017 14:12:26 +0200	[thread overview]
Message-ID: <20170707121242.18499-7-sam@ravnborg.org> (raw)
In-Reply-To: <20170707121000.GA16920@ravnborg.org>

As the mmccpu board do not have support for bootstrap
the previous lowlevel_init.c was replaced with a simple
lowlevel.c with contains only the reset vector.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/boards/mmccpu/Makefile        |   2 +-
 arch/arm/boards/mmccpu/lowlevel.c      |  26 +++++++
 arch/arm/boards/mmccpu/lowlevel_init.c | 135 ---------------------------------
 arch/arm/mach-at91/Kconfig             |   1 -
 4 files changed, 27 insertions(+), 137 deletions(-)
 create mode 100644 arch/arm/boards/mmccpu/lowlevel.c
 delete mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c

diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile
index a34efd541..e11fd5b69 100644
--- a/arch/arm/boards/mmccpu/Makefile
+++ b/arch/arm/boards/mmccpu/Makefile
@@ -1,3 +1,3 @@
 obj-y += init.o
 
-lwl-n += lowlevel_init.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/mmccpu/lowlevel.c b/arch/arm/boards/mmccpu/lowlevel.c
new file mode 100644
index 000000000..3ba24ce4c
--- /dev/null
+++ b/arch/arm/boards/mmccpu/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+  */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9263.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			  at91_get_sdram_size(IOMEM(AT91SAM9263_BASE_SDRAMC0)),
+	                  NULL);
+}
diff --git a/arch/arm/boards/mmccpu/lowlevel_init.c b/arch/arm/boards/mmccpu/lowlevel_init.c
deleted file mode 100644
index c193eae58..000000000
--- a/arch/arm/boards/mmccpu/lowlevel_init.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
-
-#define MASTER_PLL_MUL		54
-#define MASTER_PLL_DIV		4
-
-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
-{
-	/* Disable Watchdog */
-	cfg->wdt_mr =
-		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
-		AT91_WDT_WDV |
-		AT91_WDT_WDDIS |
-		AT91_WDT_WDD;
-
-	/* define PDC[31:16] as DATA[31:16] */
-	cfg->ebi_pio_pdr = 0xFFFF0000;
-	/* no pull-up for D[31:16] */
-	cfg->ebi_pio_ppudr = 0xFFFF0000;
-	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-	cfg->ebi_csa =
-		AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_1_8V |
-		AT91_MATRIX_EBI0_CS1A_SDRAMC |
-		AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA;
-
-	cfg->smc_cs = 0;
-#if 1
-	cfg->smc_mode =
-		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		AT91_SMC_DBW_16 |
-		AT91_SMC_TDFMODE |
-		AT91_SMC_TDF_(6);
-	cfg->smc_cycle =
-		AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16);
-	cfg->smc_pulse =
-		AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |
-		AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13);
-	cfg->smc_setup =
-		AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |
-		AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0);
-#elif 0	/* slow setup */
-	cfg->smc_mode =
-		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		AT91_SMC_DBW_16 |
-		AT91_SMC_TDFMODE |
-		AT91_SMC_TDF_(1);
-	cfg->smc_cycle =
-		AT91_SMC_NWECYCLE_(0xd00) | AT91_SMC_NRDCYCLE_(0xd00);
-	cfg->smc_pulse =
-		AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |
-		AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13);
-	cfg->smc_setup =
-		AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |
-		AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0);
-#else	/* RONETIX' original values */
-	cfg->smc_mode =
-		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		AT91_SMC_DBW_16 |
-		AT91_SMC_TDFMODE |
-		AT91_SMC_TDF_(6);
-	cfg->smc_cycle =
-		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
-	cfg->smc_pulse =
-		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
-		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
-	cfg->smc_setup =
-		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
-		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
-#endif
-
-	cfg->pmc_mor =
-		AT91_PMC_MOSCEN |
-		(255 << 8);		/* Main Oscillator Start-up Time */
-	cfg->pmc_pllar =
-		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
-		AT91_PMC_OUT |
-		AT91_PMC_PLLCOUNT |	/* PLL Counter */
-		(2 << 28) |		/* PLL Clock Frequency Range */
-		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
-	/* PCK/2 = MCK Master Clock from PLLA */
-	cfg->pmc_mckr1 =
-		AT91_PMC_CSS_SLOW |
-		AT91_PMC_PRES_1 |
-		AT91SAM9_PMC_MDIV_2 |
-		AT91_PMC_PDIV_1;
-	/* PCK/2 = MCK Master Clock from PLLA */
-	cfg->pmc_mckr2 =
-		AT91_PMC_CSS_PLLA |
-		AT91_PMC_PRES_1 |
-		AT91SAM9_PMC_MDIV_2 |
-		AT91_PMC_PDIV_1;
-
-	/* SDRAM */
-	/* SDRAMC_TR - Refresh Timer register */
-	cfg->sdrc_tr1 = 0x13C;
-	/* SDRAMC_CR - Configuration register*/
-	cfg->sdrc_cr =
-		AT91_SDRAMC_NC_9 |
-		AT91_SDRAMC_NR_13 |
-		AT91_SDRAMC_NB_4 |
-		AT91_SDRAMC_CAS_3 |
-		AT91_SDRAMC_DBW_32 |
-		(2 <<  8) |	/* tWR -  Write Recovery Delay */
-		(8 << 12) |	/* tRC -  Row Cycle Delay */
-		(2 << 16) |	/* tRP -  Row Precharge Delay */
-		(2 << 20) |	/* tRCD - Row to Column Delay */
-		(5 << 24) |	/* tRAS - Active to Precharge Delay */
-		(12 << 28);	/* tXSR - Exit Self Refresh to Active Delay */
-
-	/* Memory Device Register -> SDRAM */
-	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
-	/* SDRAM_TR */
-	cfg->sdrc_tr2 = 780;
-
-	/* user reset enable */
-	cfg->rstc_rmr =
-		AT91_RSTC_KEY |
-		AT91_RSTC_PROCRST |
-		AT91_RSTC_RSTTYP_WAKEUP |
-		AT91_RSTC_RSTTYP_WATCHDOG;
-}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 704abcead..6363f1a15 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -435,7 +435,6 @@ config MACH_AT91SAM9263EK
 
 config MACH_MMCCPU
 	bool "Bucyrus MMC-CPU"
-	select AT91SAM9263_LWL
 	help
 	  Say y here if you are using the Bucyrus MMC-CPU
 
-- 
2.12.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-07-07 12:13 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-07 12:10 [PATCH v2 0/23] at91: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 01/23] at91: refactor lowlevel_init selection Sam Ravnborg
2017-07-07 12:12 ` [PATCH 02/23] at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2017-07-07 12:12 ` [PATCH 03/23] at91sam9263ek: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 04/23] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 05/23] pm9261: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 06/23] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2017-07-07 12:12 ` Sam Ravnborg [this message]
2017-07-07 12:12 ` [PATCH 08/23] pm9263: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 09/23] usb-a926x: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 10/23] at91: delete at91sam926x_lowlevel_init Sam Ravnborg
2017-07-07 12:12 ` [PATCH 11/23] tny-a926x: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 12/23] qil-a926x: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 13/23] haba-knx: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 14/23] at91: delete unused at91sam9263_lowlevel_init.c Sam Ravnborg
2017-07-07 12:12 ` [PATCH 15/23] sama5d{3, 4}{xek, xplained}: move reset vector to board code Sam Ravnborg
2017-07-07 12:12 ` [PATCH 16/23] at91sam{9260, 9G20, 9m10g45, 9n12}ek: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 17/23] at91rm9200ek: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 18/23] at91sam9m10ihd: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 19/23] pm9g45: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 20/23] animeo: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 21/23] dss11: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 22/23] telit-evk-pro3: " Sam Ravnborg
2017-07-07 12:12 ` [PATCH 23/23] at91: remove leftovers from reset code in mach-at91 Sam Ravnborg
2017-07-17  9:52 ` [PATCH v2 0/23] at91: move reset vector to board code Lucas Stach
2017-07-17 11:41   ` Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170707121242.18499-7-sam@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox