From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 09/11] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel
Date: Wed, 26 Jul 2017 09:31:18 -0700 [thread overview]
Message-ID: <20170726163120.25952-10-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170726163120.25952-1-andrew.smirnov@gmail.com>
---
include/mfd/imx7-iomuxc-gpr.h | 51 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 include/mfd/imx7-iomuxc-gpr.h
diff --git a/include/mfd/imx7-iomuxc-gpr.h b/include/mfd/imx7-iomuxc-gpr.h
new file mode 100644
index 000000000..abbd52466
--- /dev/null
+++ b/include/mfd/imx7-iomuxc-gpr.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IMX7_IOMUXC_GPR_H
+#define __LINUX_IMX7_IOMUXC_GPR_H
+
+#define IOMUXC_GPR0 0x00
+#define IOMUXC_GPR1 0x04
+#define IOMUXC_GPR2 0x08
+#define IOMUXC_GPR3 0x0c
+#define IOMUXC_GPR4 0x10
+#define IOMUXC_GPR5 0x14
+#define IOMUXC_GPR6 0x18
+#define IOMUXC_GPR7 0x1c
+#define IOMUXC_GPR8 0x20
+#define IOMUXC_GPR9 0x24
+#define IOMUXC_GPR10 0x28
+#define IOMUXC_GPR11 0x2c
+#define IOMUXC_GPR12 0x30
+#define IOMUXC_GPR13 0x34
+#define IOMUXC_GPR14 0x38
+#define IOMUXC_GPR15 0x3c
+#define IOMUXC_GPR16 0x40
+#define IOMUXC_GPR17 0x44
+#define IOMUXC_GPR18 0x48
+#define IOMUXC_GPR19 0x4c
+#define IOMUXC_GPR20 0x50
+#define IOMUXC_GPR21 0x54
+#define IOMUXC_GPR22 0x58
+
+/* For imx7d iomux gpr register field define */
+#define IMX7D_GPR1_IRQ_MASK (0x1 << 12)
+#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK (0x1 << 13)
+#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK (0x1 << 14)
+#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13)
+#define IMX7D_GPR1_ENET1_CLK_DIR_MASK (0x1 << 17)
+#define IMX7D_GPR1_ENET2_CLK_DIR_MASK (0x1 << 18)
+#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17)
+
+#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI (0x1 << 4)
+
+#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL BIT(5)
+
+#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED BIT(31)
+
+#endif /* __LINUX_IMX7_IOMUXC_GPR_H */
--
2.13.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-07-26 16:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 16:31 [PATCH v2 00/11] i.MX7 SabreSD support Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 01/11] gpiolib: Fix buggy flag detection code Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 02/11] gpiolib: Simplify code of gpio_request_one() Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 03/11] clk: i.MX7: Remove unused UART clocks array Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 04/11] ARM: i.MX: Import mx7d_pins.h from U-Boot Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 05/11] ARM: i.MX: Add mx7_setup_pad() Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 06/11] ARM: i.MX: Add imx7_uart_setup_ll() Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 07/11] ARM: i.MX: Add minimal imx7-ccm-regs.h Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 08/11] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7 Andrey Smirnov
2017-07-26 16:31 ` Andrey Smirnov [this message]
2017-07-26 16:31 ` [PATCH v2 10/11] include: Add phy-id-list.h Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board Andrey Smirnov
2017-07-26 16:55 ` Sam Ravnborg
2017-07-26 16:56 ` [PATCH v2 00/11] i.MX7 SabreSD support Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170726163120.25952-10-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox