From: Sam Ravnborg <sam@ravnborg.org>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 00/11] i.MX7 SabreSD support
Date: Wed, 26 Jul 2017 18:56:31 +0200 [thread overview]
Message-ID: <20170726165631.GB28124@ravnborg.org> (raw)
In-Reply-To: <20170726163120.25952-1-andrew.smirnov@gmail.com>
Hi Andrey.
On Wed, Jul 26, 2017 at 09:31:09AM -0700, Andrey Smirnov wrote:
> Hi everyone,
>
> This is a v2 of the patch series to add support for NXP's i.MX7
> SabreSD board. It's most likely lacking some advanced features, but
> basics such as SD card, Ethernet and, of course, booting Linux seem to
> work OK.
>
> The patchset is updated to use defenitions from Uwe's most recent
> submission ("ARM: i.MX7: provide DDR register definitions") so this
> series has that as a dependency.
>
> Patch 1/9 contains a fix for a pretty serious screw-up on my part, so
> I think it should be applied to master as well.
>
> Also, note, that for a reason I haven't been able to track down yet,
> compiling Barebox + this patchset without support for FEC will cause
> upstream kernel (at least 4.12-rc1) to hang during boot while trying
> to access FEC's register file. I suspect clock initialization issue,
> but, as I said, I did not find that out conclusively.
>
> Anyway, as usual, any feedback is wellcome.
>
> Thanks,
> Andrey Smirnov
Other than a notpick comment everything looks good to me.
For the whole series:
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Sam
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2017-07-26 16:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 16:31 Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 01/11] gpiolib: Fix buggy flag detection code Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 02/11] gpiolib: Simplify code of gpio_request_one() Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 03/11] clk: i.MX7: Remove unused UART clocks array Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 04/11] ARM: i.MX: Import mx7d_pins.h from U-Boot Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 05/11] ARM: i.MX: Add mx7_setup_pad() Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 06/11] ARM: i.MX: Add imx7_uart_setup_ll() Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 07/11] ARM: i.MX: Add minimal imx7-ccm-regs.h Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 08/11] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7 Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 09/11] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 10/11] include: Add phy-id-list.h Andrey Smirnov
2017-07-26 16:31 ` [PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board Andrey Smirnov
2017-07-26 16:55 ` Sam Ravnborg
2017-07-26 16:56 ` Sam Ravnborg [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170726165631.GB28124@ravnborg.org \
--to=sam@ravnborg.org \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox