* [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som
@ 2017-08-22 6:44 Daniel Schultz
2017-08-22 6:44 ` [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI Daniel Schultz
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Daniel Schultz @ 2017-08-22 6:44 UTC (permalink / raw)
To: barebox
Add the EMMC node to the phycore-som device tree. It's by default
disabled, because NAND is the primary boot device.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
arch/arm/dts/am335x-phytec-phycore-som.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
index 0b8c454..0025bc7 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
@@ -58,6 +58,21 @@
>;
};
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
emac_rmii1_pins: pinmux_emac_rmii1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
@@ -157,6 +172,15 @@
status = "okay";
};
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "disabled";
+ ti,vcc-aux-disable-is-sleep;
+ non-removable;
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI
2017-08-22 6:44 [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Daniel Schultz
@ 2017-08-22 6:44 ` Daniel Schultz
2017-08-22 6:44 ` [PATCH 3/4] arm: dts: am335x: Add phycore emmc device tree Daniel Schultz
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Daniel Schultz @ 2017-08-22 6:44 UTC (permalink / raw)
To: barebox
Starting with PCM-062, NAND isn't the main non-volatile memory for the
AM335x. Because that, NAND has be disabled in the SOM dtsi file and will
be enabled in a specific NAND SOM file.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
arch/arm/boards/phytec-som-am335x/lowlevel.c | 8 ++++----
arch/arm/dts/Makefile | 5 +++--
....dts => am335x-phytec-phycore-som-nand-no-eeprom.dts} | 4 ++++
... am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dts} | 4 ++++
...som.dts => am335x-phytec-phycore-som-nand-no-spi.dts} | 2 +-
...som-no-spi.dts => am335x-phytec-phycore-som-nand.dts} | 8 ++++++++
arch/arm/dts/am335x-phytec-phycore-som.dtsi | 2 +-
images/Makefile.am33xx | 16 ++++++++--------
8 files changed, 33 insertions(+), 16 deletions(-)
rename arch/arm/dts/{am335x-phytec-phycore-som-no-eeprom.dts => am335x-phytec-phycore-som-nand-no-eeprom.dts} (94%)
rename arch/arm/dts/{am335x-phytec-phycore-som-no-spi-no-eeprom.dts => am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dts} (94%)
rename arch/arm/dts/{am335x-phytec-phycore-som.dts => am335x-phytec-phycore-som-nand-no-spi.dts} (98%)
rename arch/arm/dts/{am335x-phytec-phycore-som-no-spi.dts => am335x-phytec-phycore-som-nand.dts} (89%)
diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
index 03c7e98..91a5473 100644
--- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
@@ -125,10 +125,10 @@ PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_sram_2x512mb, am335x_phytec_phycore
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_512mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K256M16TW107IT_512MB);
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K128M16JT_256MB);
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_1024mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K512M16HA125IT_1024MB);
-PHYTEC_ENTRY(start_am33xx_phytec_phycore_sdram, am335x_phytec_phycore_som);
-PHYTEC_ENTRY(start_am33xx_phytec_phycore_no_spi_sdram, am335x_phytec_phycore_som_no_spi);
-PHYTEC_ENTRY(start_am33xx_phytec_phycore_no_eeprom_sdram, am335x_phytec_phycore_som_no_eeprom);
-PHYTEC_ENTRY(start_am33xx_phytec_phycore_no_spi_no_eeprom_sdram, am335x_phytec_phycore_som_no_spi_no_eeprom);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_sdram, am335x_phytec_phycore_som_nand);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_no_spi_sdram, am335x_phytec_phycore_som_nand_no_spi);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_no_eeprom_sdram, am335x_phytec_phycore_som_nand_no_eeprom);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_no_spi_no_eeprom_sdram, am335x_phytec_phycore_som_nand_no_spi_no_eeprom);
/* phyflex-som */
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phyflex_sram_256mb, am335x_phytec_phyflex_som_mlo, PHYFLEX_MT41K128M16JT_256MB);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0ec03bc..17bba3a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -40,8 +40,9 @@ pbl-dtb-$(CONFIG_MACH_PCM038) += imx27-phytec-phycore-rdk.dtb.o
pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += am335x-phytec-phyflex-som.dtb.o am335x-phytec-phyflex-som-mlo.dtb.o \
am335x-phytec-phyflex-som-no-spi.dtb.o am335x-phytec-phyflex-som-no-eeprom.dtb.o \
am335x-phytec-phyflex-som-no-spi-no-eeprom.dtb.o \
- am335x-phytec-phycore-som.dtb.o am335x-phytec-phycore-som-no-spi.dtb.o am335x-phytec-phycore-som-mlo.dtb.o \
- am335x-phytec-phycore-som-no-eeprom.dtb.o am335x-phytec-phycore-som-no-spi-no-eeprom.dtb.o \
+ am335x-phytec-phycore-som-mlo.dtb.o \
+ am335x-phytec-phycore-som-nand.dtb.o am335x-phytec-phycore-som-nand-no-spi.dtb.o \
+ am335x-phytec-phycore-som-nand-no-eeprom.dtb.o am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dtb.o \
am335x-phytec-phycard-som.dtb.o am335x-phytec-phycard-som-mlo.dtb.o
pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \
imx6s-phytec-pbab01.dtb.o \
diff --git a/arch/arm/dts/am335x-phytec-phycore-som-no-eeprom.dts b/arch/arm/dts/am335x-phytec-phycore-som-nand-no-eeprom.dts
similarity index 94%
rename from arch/arm/dts/am335x-phytec-phycore-som-no-eeprom.dts
rename to arch/arm/dts/am335x-phytec-phycore-som-nand-no-eeprom.dts
index 3dd130e..9f0da37 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som-no-eeprom.dts
+++ b/arch/arm/dts/am335x-phytec-phycore-som-nand-no-eeprom.dts
@@ -16,6 +16,10 @@
compatible = "phytec,phycore-am335x-som", "phytec,am335x-som", "ti,am33xx";
};
+&gpmc {
+ status = "okay";
+};
+
&spi0 {
status = "okay";
};
diff --git a/arch/arm/dts/am335x-phytec-phycore-som-no-spi-no-eeprom.dts b/arch/arm/dts/am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dts
similarity index 94%
rename from arch/arm/dts/am335x-phytec-phycore-som-no-spi-no-eeprom.dts
rename to arch/arm/dts/am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dts
index 397be77..c026a82 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som-no-spi-no-eeprom.dts
+++ b/arch/arm/dts/am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dts
@@ -15,3 +15,7 @@
model = "Phytec phyCORE AM335x";
compatible = "phytec,phycore-am335x-som", "phytec,am335x-som", "ti,am33xx";
};
+
+&gpmc {
+ status = "okay";
+};
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dts b/arch/arm/dts/am335x-phytec-phycore-som-nand-no-spi.dts
similarity index 98%
rename from arch/arm/dts/am335x-phytec-phycore-som.dts
rename to arch/arm/dts/am335x-phytec-phycore-som-nand-no-spi.dts
index f13e0d6..2c2fab0 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som.dts
+++ b/arch/arm/dts/am335x-phytec-phycore-som-nand-no-spi.dts
@@ -15,7 +15,7 @@
compatible = "phytec,phycore-am335x-som", "phytec,am335x-som", "ti,am33xx";
};
-&spi0 {
+&gpmc {
status = "okay";
};
diff --git a/arch/arm/dts/am335x-phytec-phycore-som-no-spi.dts b/arch/arm/dts/am335x-phytec-phycore-som-nand.dts
similarity index 89%
rename from arch/arm/dts/am335x-phytec-phycore-som-no-spi.dts
rename to arch/arm/dts/am335x-phytec-phycore-som-nand.dts
index ad03d4d..6ff2447 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som-no-spi.dts
+++ b/arch/arm/dts/am335x-phytec-phycore-som-nand.dts
@@ -15,6 +15,14 @@
compatible = "phytec,phycore-am335x-som", "phytec,am335x-som", "ti,am33xx";
};
+&gpmc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
&eeprom {
status = "okay";
};
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
index 0025bc7..dbc6424 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
@@ -249,7 +249,7 @@
};
&gpmc {
- status = "okay";
+ status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
diff --git a/images/Makefile.am33xx b/images/Makefile.am33xx
index d1c432e..d82627b 100644
--- a/images/Makefile.am33xx
+++ b/images/Makefile.am33xx
@@ -25,20 +25,20 @@ FILE_barebox-am33xx-afi-gf-mlo.spi.img = start_am33xx_afi_gf_sram.pblx.mlospi
am33xx-mlo-$(CONFIG_MACH_AFI_GF) += barebox-am33xx-afi-gf-mlo.img
am33xx-mlospi-$(CONFIG_MACH_AFI_GF) += barebox-am33xx-afi-gf-mlo.spi.img
-pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sdram
-FILE_barebox-am33xx-phytec-phycore.img = start_am33xx_phytec_phycore_sdram.pblx
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_nand_sdram
+FILE_barebox-am33xx-phytec-phycore.img = start_am33xx_phytec_phycore_nand_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore.img
-pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_no_spi_sdram
-FILE_barebox-am33xx-phytec-phycore-no-spi.img = start_am33xx_phytec_phycore_no_spi_sdram.pblx
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_nand_no_spi_sdram
+FILE_barebox-am33xx-phytec-phycore-no-spi.img = start_am33xx_phytec_phycore_nand_no_spi_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-no-spi.img
-pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_no_eeprom_sdram
-FILE_barebox-am33xx-phytec-phycore-no-eeprom.img = start_am33xx_phytec_phycore_no_eeprom_sdram.pblx
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_nand_no_eeprom_sdram
+FILE_barebox-am33xx-phytec-phycore-no-eeprom.img = start_am33xx_phytec_phycore_nand_no_eeprom_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-no-eeprom.img
-pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_no_spi_no_eeprom_sdram
-FILE_barebox-am33xx-phytec-phycore-no-spi-no-eeprom.img = start_am33xx_phytec_phycore_no_spi_no_eeprom_sdram.pblx
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_nand_no_spi_no_eeprom_sdram
+FILE_barebox-am33xx-phytec-phycore-no-spi-no-eeprom.img = start_am33xx_phytec_phycore_nand_no_spi_no_eeprom_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-no-spi-no-eeprom.img
pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_sram_256mb
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 3/4] arm: dts: am335x: Add phycore emmc device tree
2017-08-22 6:44 [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Daniel Schultz
2017-08-22 6:44 ` [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI Daniel Schultz
@ 2017-08-22 6:44 ` Daniel Schultz
2017-08-22 6:44 ` [PATCH 4/4] arm: configs: AM335x: Enable mmc-extcsd command Daniel Schultz
2017-09-06 12:31 ` [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Daniel Schultz @ 2017-08-22 6:44 UTC (permalink / raw)
To: barebox
Add a new device tree for phyCORE SOMs with EMMC enabled and NAND
disabled.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
arch/arm/boards/phytec-som-am335x/lowlevel.c | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/am335x-phytec-phycore-som-emmc.dts | 35 +++++++++++++++++++++++++
images/Makefile.am33xx | 4 +++
4 files changed, 41 insertions(+)
create mode 100644 arch/arm/dts/am335x-phytec-phycore-som-emmc.dts
diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
index 91a5473..77f436f 100644
--- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
@@ -126,6 +126,7 @@ PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_512mb, am335x_phytec_phycor
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_256mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K128M16JT_256MB);
PHYTEC_ENTRY_MLO(start_am33xx_phytec_phycore_r2_sram_1024mb, am335x_phytec_phycore_som_mlo, PHYCORE_R2_MT41K512M16HA125IT_1024MB);
PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_sdram, am335x_phytec_phycore_som_nand);
+PHYTEC_ENTRY(start_am33xx_phytec_phycore_emmc_sdram, am335x_phytec_phycore_som_emmc);
PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_no_spi_sdram, am335x_phytec_phycore_som_nand_no_spi);
PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_no_eeprom_sdram, am335x_phytec_phycore_som_nand_no_eeprom);
PHYTEC_ENTRY(start_am33xx_phytec_phycore_nand_no_spi_no_eeprom_sdram, am335x_phytec_phycore_som_nand_no_spi_no_eeprom);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 17bba3a..cf9d8ea 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -43,6 +43,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += am335x-phytec-phyflex-som.dtb.o am33
am335x-phytec-phycore-som-mlo.dtb.o \
am335x-phytec-phycore-som-nand.dtb.o am335x-phytec-phycore-som-nand-no-spi.dtb.o \
am335x-phytec-phycore-som-nand-no-eeprom.dtb.o am335x-phytec-phycore-som-nand-no-spi-no-eeprom.dtb.o \
+ am335x-phytec-phycore-som-emmc.dtb.o \
am335x-phytec-phycard-som.dtb.o am335x-phytec-phycard-som-mlo.dtb.o
pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \
imx6s-phytec-pbab01.dtb.o \
diff --git a/arch/arm/dts/am335x-phytec-phycore-som-emmc.dts b/arch/arm/dts/am335x-phytec-phycore-som-emmc.dts
new file mode 100644
index 0000000..880700e
--- /dev/null
+++ b/arch/arm/dts/am335x-phytec-phycore-som-emmc.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH,
+ * Author: Daniel Schultz <d.schultz@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-phytec-phycore-som.dtsi"
+
+/ {
+ model = "Phytec phyCORE EMMC AM335x";
+ compatible = "phytec,phycore-am335x-som", "phytec,am335x-som", "ti,am33xx";
+};
+
+&mmc2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&eeprom {
+ status = "okay";
+};
diff --git a/images/Makefile.am33xx b/images/Makefile.am33xx
index d82627b..e86d4e9 100644
--- a/images/Makefile.am33xx
+++ b/images/Makefile.am33xx
@@ -29,6 +29,10 @@ pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_nand_sdram
FILE_barebox-am33xx-phytec-phycore.img = start_am33xx_phytec_phycore_nand_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore.img
+pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_emmc_sdram
+FILE_barebox-am33xx-phytec-phycore-emmc.img = start_am33xx_phytec_phycore_emmc_sdram.pblx
+am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-emmc.img
+
pblx-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += start_am33xx_phytec_phycore_nand_no_spi_sdram
FILE_barebox-am33xx-phytec-phycore-no-spi.img = start_am33xx_phytec_phycore_nand_no_spi_sdram.pblx
am33xx-barebox-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += barebox-am33xx-phytec-phycore-no-spi.img
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 4/4] arm: configs: AM335x: Enable mmc-extcsd command
2017-08-22 6:44 [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Daniel Schultz
2017-08-22 6:44 ` [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI Daniel Schultz
2017-08-22 6:44 ` [PATCH 3/4] arm: dts: am335x: Add phycore emmc device tree Daniel Schultz
@ 2017-08-22 6:44 ` Daniel Schultz
2017-09-06 12:31 ` [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Daniel Schultz @ 2017-08-22 6:44 UTC (permalink / raw)
To: barebox
This tool is for setting up eMMC devices.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
arch/arm/configs/am335x_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/am335x_defconfig b/arch/arm/configs/am335x_defconfig
index 382133b..dd9c3c5 100644
--- a/arch/arm/configs/am335x_defconfig
+++ b/arch/arm/configs/am335x_defconfig
@@ -87,6 +87,7 @@ CONFIG_CMD_OF_DISPLAY_TIMINGS=y
CONFIG_CMD_OF_FIXUP_STATUS=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_MMC_EXTCSD=y
CONFIG_NET=y
CONFIG_NET_NFS=y
CONFIG_NET_NETCONSOLE=y
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som
2017-08-22 6:44 [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Daniel Schultz
` (2 preceding siblings ...)
2017-08-22 6:44 ` [PATCH 4/4] arm: configs: AM335x: Enable mmc-extcsd command Daniel Schultz
@ 2017-09-06 12:31 ` Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2017-09-06 12:31 UTC (permalink / raw)
To: Daniel Schultz; +Cc: barebox
On Tue, Aug 22, 2017 at 08:44:04AM +0200, Daniel Schultz wrote:
> Add the EMMC node to the phycore-som device tree. It's by default
> disabled, because NAND is the primary boot device.
>
> Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
> ---
> arch/arm/dts/am335x-phytec-phycore-som.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
> index 0b8c454..0025bc7 100644
> --- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
> +++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
> @@ -58,6 +58,21 @@
> >;
> };
>
> + emmc_pins: pinmux_emmc_pins {
> + pinctrl-single,pins = <
> + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
> + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
> + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
> + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
> + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
> + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
> + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
> + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
> + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
> + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
> + >;
> + };
> +
> emac_rmii1_pins: pinmux_emac_rmii1_pins {
> pinctrl-single,pins = <
> 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
> @@ -157,6 +172,15 @@
> status = "okay";
> };
>
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_pins>;
> + bus-width = <8>;
> + status = "disabled";
> + ti,vcc-aux-disable-is-sleep;
> + non-removable;
> +};
> +
> &spi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&spi0_pins>;
> --
> 2.7.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-09-06 12:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-22 6:44 [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Daniel Schultz
2017-08-22 6:44 ` [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI Daniel Schultz
2017-08-22 6:44 ` [PATCH 3/4] arm: dts: am335x: Add phycore emmc device tree Daniel Schultz
2017-08-22 6:44 ` [PATCH 4/4] arm: configs: AM335x: Enable mmc-extcsd command Daniel Schultz
2017-09-06 12:31 ` [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox