From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dpZUr-0006E3-En for barebox@lists.infradead.org; Wed, 06 Sep 2017 12:31:59 +0000 Date: Wed, 6 Sep 2017 14:31:36 +0200 From: Sascha Hauer Message-ID: <20170906123136.po6ksxc4arcrrcsq@pengutronix.de> References: <1503384247-43167-1-git-send-email-d.schultz@phytec.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1503384247-43167-1-git-send-email-d.schultz@phytec.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som To: Daniel Schultz Cc: barebox@lists.infradead.org On Tue, Aug 22, 2017 at 08:44:04AM +0200, Daniel Schultz wrote: > Add the EMMC node to the phycore-som device tree. It's by default > disabled, because NAND is the primary boot device. > > Signed-off-by: Daniel Schultz > --- > arch/arm/dts/am335x-phytec-phycore-som.dtsi | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) Applied, thanks Sascha > > diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi > index 0b8c454..0025bc7 100644 > --- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi > +++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi > @@ -58,6 +58,21 @@ > >; > }; > > + emmc_pins: pinmux_emmc_pins { > + pinctrl-single,pins = < > + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ > + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ > + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ > + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ > + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ > + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ > + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ > + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ > + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ > + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ > + >; > + }; > + > emac_rmii1_pins: pinmux_emac_rmii1_pins { > pinctrl-single,pins = < > 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ > @@ -157,6 +172,15 @@ > status = "okay"; > }; > > +&mmc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_pins>; > + bus-width = <8>; > + status = "disabled"; > + ti,vcc-aux-disable-is-sleep; > + non-removable; > +}; > + > &spi0 { > pinctrl-names = "default"; > pinctrl-0 = <&spi0_pins>; > -- > 2.7.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox