* [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
@ 2017-09-13 14:15 ` Oleksij Rempel
2017-09-14 6:44 ` Sascha Hauer
2017-09-13 14:15 ` [PATCH v2 02/10] add ar9331.dtsi and enable mac0 Oleksij Rempel
` (8 subsequent siblings)
9 siblings, 1 reply; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:15 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
From: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 12 +
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/ag71xx.c | 673 ++++++++++++++++++++++++
4 files changed, 693 insertions(+)
create mode 100644 drivers/net/ag71xx.c
diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
index f56c3f724..31d33b3c4 100644
--- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
+++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
@@ -102,6 +102,8 @@
#define AR933X_PLL_CLOCK_CTRL_REG 0x08
#define AR933X_PLL_DITHER_FRAC_REG 0x10
#define AR933X_PLL_DITHER_REG 0x14
+#define AR933X_ETHSW_CLOCK_CONTROL_REG 0x24
+#define AR933X_ETH_XMII_CONTROL_REG 0x2c
#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10
#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f
@@ -125,6 +127,16 @@
#define AR933X_RESET_REG_RESET_MODULE 0x1c
#define AR933X_RESET_REG_BOOTSTRAP 0xac
+#define AR933X_RESET_GE1_MDIO BIT(23)
+#define AR933X_RESET_GE0_MDIO BIT(22)
+#define AR933X_RESET_GE1_MAC BIT(13)
+#define AR933X_RESET_WMAC BIT(11)
+#define AR933X_RESET_GE0_MAC BIT(9)
+#define AR933X_RESET_SWITCH BIT(8)
+#define AR933X_RESET_USB_HOST BIT(5)
+#define AR933X_RESET_USB_PHY BIT(4)
+#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+
#define AR71XX_RESET_FULL_CHIP BIT(24)
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c3980e78f..9d69b6aeb 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -204,6 +204,13 @@ config DRIVER_NET_EFI_SNP
bool "EFI SNP ethernet driver"
depends on EFI_BOOTUP
+config DRIVER_NET_AG71XX
+ bool "Atheros AG71xx ethernet driver"
+ depends on MACH_MIPS_ATH79
+ select PHYLIB
+ help
+ This option enables support for Atheros AG71XX ethernet chip.
+
config DRIVER_NET_TSE
depends on NIOS2
bool "Altera TSE ethernet driver"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 42ea208e3..86c8ac32f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_DRIVER_NET_SMC91111) += smc91111.o
obj-$(CONFIG_DRIVER_NET_TAP) += tap.o
obj-$(CONFIG_DRIVER_NET_TSE) += altera_tse.o
obj-$(CONFIG_DRIVER_NET_EFI_SNP) += efi-snp.o
+obj-$(CONFIG_DRIVER_NET_AG71XX) += ag71xx.o
diff --git a/drivers/net/ag71xx.c b/drivers/net/ag71xx.c
new file mode 100644
index 000000000..76e6474c2
--- /dev/null
+++ b/drivers/net/ag71xx.c
@@ -0,0 +1,673 @@
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <net.h>
+#include <dma.h>
+#include <init.h>
+#include <io.h>
+#include <linux/err.h>
+#include <linux/phy.h>
+#include <of_net.h>
+#include <of_address.h>
+
+#include <mach/ath79.h>
+
+/* Register offsets */
+#define AG71XX_REG_MAC_CFG1 0x0000
+#define AG71XX_REG_MAC_CFG2 0x0004
+#define AG71XX_REG_MAC_IPG 0x0008
+#define AG71XX_REG_MAC_HDX 0x000c
+#define AG71XX_REG_MAC_MFL 0x0010
+#define AG71XX_REG_MII_CFG 0x0020
+#define AG71XX_REG_MII_CMD 0x0024
+#define AG71XX_REG_MII_ADDR 0x0028
+#define AG71XX_REG_MII_CTRL 0x002c
+#define AG71XX_REG_MII_STATUS 0x0030
+#define AG71XX_REG_MII_IND 0x0034
+#define AG71XX_REG_MAC_IFCTL 0x0038
+#define AG71XX_REG_MAC_ADDR1 0x0040
+#define AG71XX_REG_MAC_ADDR2 0x0044
+#define AG71XX_REG_FIFO_CFG0 0x0048
+#define AG71XX_REG_FIFO_CFG1 0x004c
+#define AG71XX_REG_FIFO_CFG2 0x0050
+#define AG71XX_REG_FIFO_CFG3 0x0054
+#define AG71XX_REG_FIFO_CFG4 0x0058
+#define AG71XX_REG_FIFO_CFG5 0x005c
+#define AG71XX_REG_FIFO_RAM0 0x0060
+#define AG71XX_REG_FIFO_RAM1 0x0064
+#define AG71XX_REG_FIFO_RAM2 0x0068
+#define AG71XX_REG_FIFO_RAM3 0x006c
+#define AG71XX_REG_FIFO_RAM4 0x0070
+#define AG71XX_REG_FIFO_RAM5 0x0074
+#define AG71XX_REG_FIFO_RAM6 0x0078
+#define AG71XX_REG_FIFO_RAM7 0x007c
+
+#define AG71XX_REG_TX_CTRL 0x0180
+#define AG71XX_REG_TX_DESC 0x0184
+#define AG71XX_REG_TX_STATUS 0x0188
+#define AG71XX_REG_RX_CTRL 0x018c
+#define AG71XX_REG_RX_DESC 0x0190
+#define AG71XX_REG_RX_STATUS 0x0194
+#define AG71XX_REG_INT_ENABLE 0x0198
+#define AG71XX_REG_INT_STATUS 0x019c
+
+#define AG71XX_REG_FIFO_DEPTH 0x01a8
+#define AG71XX_REG_RX_SM 0x01b0
+#define AG71XX_REG_TX_SM 0x01b4
+
+#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
+#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
+#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
+#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
+#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
+#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
+#define MAC_CFG1_LB BIT(8) /* Loopback mode */
+#define MAC_CFG1_TX_RST BIT(18) /* Tx Reset */
+#define MAC_CFG1_RX_RST BIT(19) /* Rx Reset */
+#define MAC_CFG1_SR BIT(31) /* Soft Reset */
+
+#define MAC_CFG2_FDX BIT(0)
+#define MAC_CFG2_CRC_EN BIT(1)
+#define MAC_CFG2_PAD_CRC_EN BIT(2)
+#define MAC_CFG2_LEN_CHECK BIT(4)
+#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
+#define MAC_CFG2_IF_1000 BIT(9)
+#define MAC_CFG2_IF_10_100 BIT(8)
+
+#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
+#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
+#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
+#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
+#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
+#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
+ | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
+
+#define FIFO_CFG0_ENABLE_SHIFT 8
+
+#define FIFO_CFG4_DE BIT(0) /* Drop Event */
+#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
+#define FIFO_CFG4_FC BIT(2) /* False Carrier */
+#define FIFO_CFG4_CE BIT(3) /* Code Error */
+#define FIFO_CFG4_CR BIT(4) /* CRC error */
+#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
+#define FIFO_CFG4_LO BIT(6) /* Length out of range */
+#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
+#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
+#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
+#define FIFO_CFG4_DR BIT(10) /* Dribble */
+#define FIFO_CFG4_LE BIT(11) /* Long Event */
+#define FIFO_CFG4_CF BIT(12) /* Control Frame */
+#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
+#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
+#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
+#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
+#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
+
+#define FIFO_CFG5_DE BIT(0) /* Drop Event */
+#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
+#define FIFO_CFG5_FC BIT(2) /* False Carrier */
+#define FIFO_CFG5_CE BIT(3) /* Code Error */
+#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
+#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
+#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
+#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
+#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
+#define FIFO_CFG5_DR BIT(9) /* Dribble */
+#define FIFO_CFG5_CF BIT(10) /* Control Frame */
+#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
+#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
+#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
+#define FIFO_CFG5_LE BIT(14) /* Long Event */
+#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
+#define FIFO_CFG5_16 BIT(16) /* unknown */
+#define FIFO_CFG5_17 BIT(17) /* unknown */
+#define FIFO_CFG5_SF BIT(18) /* Short Frame */
+#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
+
+#define AG71XX_INT_TX_PS BIT(0)
+#define AG71XX_INT_TX_UR BIT(1)
+#define AG71XX_INT_TX_BE BIT(3)
+#define AG71XX_INT_RX_PR BIT(4)
+#define AG71XX_INT_RX_OF BIT(6)
+#define AG71XX_INT_RX_BE BIT(7)
+
+#define MAC_IFCTL_SPEED BIT(16)
+
+#define MII_CFG_CLK_DIV_4 0
+#define MII_CFG_CLK_DIV_6 2
+#define MII_CFG_CLK_DIV_8 3
+#define MII_CFG_CLK_DIV_10 4
+#define MII_CFG_CLK_DIV_14 5
+#define MII_CFG_CLK_DIV_20 6
+#define MII_CFG_CLK_DIV_28 7
+#define MII_CFG_CLK_DIV_34 8
+#define MII_CFG_CLK_DIV_42 9
+#define MII_CFG_CLK_DIV_50 10
+#define MII_CFG_CLK_DIV_58 11
+#define MII_CFG_CLK_DIV_66 12
+#define MII_CFG_CLK_DIV_74 13
+#define MII_CFG_CLK_DIV_82 14
+#define MII_CFG_CLK_DIV_98 15
+#define MII_CFG_RESET BIT(31)
+
+#define MII_CMD_WRITE 0x0
+#define MII_CMD_READ 0x1
+#define MII_ADDR_SHIFT 8
+#define MII_IND_BUSY BIT(0)
+#define MII_IND_INVALID BIT(2)
+
+#define TX_CTRL_TXE BIT(0) /* Tx Enable */
+
+#define TX_STATUS_PS BIT(0) /* Packet Sent */
+#define TX_STATUS_UR BIT(1) /* Tx Underrun */
+#define TX_STATUS_BE BIT(3) /* Bus Error */
+
+#define RX_CTRL_RXE BIT(0) /* Rx Enable */
+
+#define RX_STATUS_PR BIT(0) /* Packet Received */
+#define RX_STATUS_OF BIT(2) /* Rx Overflow */
+#define RX_STATUS_BE BIT(3) /* Bus Error */
+
+/*
+ * GMAC register macros
+ */
+#define AG71XX_ETH_CFG_RGMII_GE0 (1<<0)
+#define AG71XX_ETH_CFG_MII_GE0_SLAVE (1<<4)
+
+enum ag71xx_type {
+ AG71XX_TYPE_AR9331_GE0,
+ AG71XX_TYPE_AR9344_GMAC0,
+};
+
+/*
+ * h/w descriptor
+ */
+typedef struct {
+ uint32_t pkt_start_addr;
+
+ uint32_t is_empty : 1;
+ uint32_t res1 : 10;
+ uint32_t ftpp_override : 5;
+ uint32_t res2 : 4;
+ uint32_t pkt_size : 12;
+
+ uint32_t next_desc ;
+} ag7240_desc_t;
+
+#define NO_OF_TX_FIFOS 8
+#define NO_OF_RX_FIFOS 8
+#define TX_RING_SZ (NO_OF_TX_FIFOS * sizeof(ag7240_desc_t))
+#define MAX_RBUFF_SZ 0x600 /* 1518 rounded up */
+
+#define MAX_WAIT 1000
+
+struct ag71xx {
+ struct device_d *dev;
+ struct eth_device netdev;
+ void __iomem *regs;
+ void __iomem *regs_gmac;
+ struct mii_bus miibus;
+ const struct ag71xx_cfg *cfg;
+
+ void *rx_buffer;
+
+ unsigned char *rx_pkt[NO_OF_RX_FIFOS];
+ ag7240_desc_t *fifo_tx;
+ ag7240_desc_t *fifo_rx;
+ dma_addr_t addr_tx;
+ dma_addr_t addr_rx;
+
+ int next_tx;
+ int next_rx;
+};
+
+struct ag71xx_cfg {
+ enum ag71xx_type type;
+ void (*init_mii)(struct ag71xx *priv);
+};
+
+static inline void ag71xx_check_reg_offset(struct ag71xx *priv, int reg)
+{
+ switch (reg) {
+ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
+ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
+ case AG71XX_REG_MII_CFG ... AG71XX_REG_MII_IND:
+ break;
+
+ default:
+ BUG();
+ }
+}
+
+static inline u32 ar7240_reg_rd(u32 reg)
+{
+ return __raw_readl(KSEG1ADDR(reg));
+}
+
+static inline void ar7240_reg_wr(u32 reg, u32 val)
+{
+ __raw_writel(val, KSEG1ADDR(reg));
+}
+
+static inline u32 ag71xx_gmac_rr(struct ag71xx *dev, int reg)
+{
+ return __raw_readl(dev->regs_gmac + reg);
+}
+
+static inline void ag71xx_gmac_wr(struct ag71xx *dev, int reg, u32 val)
+{
+ __raw_writel(val, dev->regs_gmac + reg);
+}
+
+static inline u32 ag71xx_rr(struct ag71xx *priv, int reg)
+{
+ ag71xx_check_reg_offset(priv, reg);
+
+ return __raw_readl(priv->regs + reg);
+}
+
+static inline void ag71xx_wr(struct ag71xx *priv, int reg, u32 val)
+{
+ ag71xx_check_reg_offset(priv, reg);
+
+ __raw_writel(val, priv->regs + reg);
+ /* flush write */
+ (void)__raw_readl(priv->regs + reg);
+}
+
+
+static int ag71xx_mii_wait(struct ag71xx *priv, int write)
+{
+ struct device_d *dev = priv->dev;
+ uint64_t start;
+
+ start = get_time_ns();
+ while (ag71xx_rr(priv, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
+ if (!is_timeout_non_interruptible(start, 100 * USECOND))
+ continue;
+
+ dev_err(dev, "mii %s error: bus is still busy!\n",
+ write ? "write" : "read");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int ag71xx_ether_mii_read(struct mii_bus *miidev, int phy_addr, int reg)
+{
+ struct ag71xx *priv = miidev->priv;
+ const struct ag71xx_cfg *cfg = priv->cfg;
+ u16 addr = (phy_addr << MII_ADDR_SHIFT) | reg, val;
+ int ret;
+
+ if (AG71XX_TYPE_AR9331_GE0 == cfg->type)
+ return 0xffff;
+
+ ret = ag71xx_mii_wait(priv, 0);
+ if (ret)
+ return ret;
+
+ ag71xx_wr(priv, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+ ag71xx_wr(priv, AG71XX_REG_MII_ADDR, addr);
+ ag71xx_wr(priv, AG71XX_REG_MII_CMD, MII_CMD_READ);
+
+ ret = ag71xx_mii_wait(priv, 0);
+ if (ret)
+ return ret;
+
+ val = ag71xx_rr(priv, AG71XX_REG_MII_STATUS);
+ ag71xx_wr(priv, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+
+ return val;
+}
+
+static int ag71xx_ether_mii_write(struct mii_bus *miidev, int phy_addr,
+ int reg, u16 val)
+{
+ struct ag71xx *priv = miidev->priv;
+ const struct ag71xx_cfg *cfg = priv->cfg;
+ u16 addr = (phy_addr << MII_ADDR_SHIFT) | reg;
+ int ret;
+
+ if (AG71XX_TYPE_AR9331_GE0 == cfg->type)
+ return 0;
+
+ ret = ag71xx_mii_wait(priv, 1);
+ if (ret)
+ return ret;
+
+ ag71xx_wr(priv, AG71XX_REG_MII_ADDR, addr);
+ ag71xx_wr(priv, AG71XX_REG_MII_CTRL, val);
+
+ ret = ag71xx_mii_wait(priv, 1);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ag71xx_ether_set_ethaddr(struct eth_device *edev,
+ const unsigned char *adr)
+{
+ return 0;
+}
+
+static int ag71xx_ether_get_ethaddr(struct eth_device *edev, unsigned char *adr)
+{
+ /* We have no eeprom */
+ return -ENODEV;
+}
+
+static void ag71xx_ether_halt(struct eth_device *edev)
+{
+ struct ag71xx *priv = edev->priv;
+ struct device_d *dev = priv->dev;
+ uint64_t start;
+
+ ag71xx_wr(priv, AG71XX_REG_RX_CTRL, 0);
+ start = get_time_ns();
+ while (ag71xx_rr(priv, AG71XX_REG_RX_CTRL)) {
+ if (!is_timeout_non_interruptible(start, 100 * USECOND)) {
+ dev_err(dev, "error: filed to stop device!\n");
+ break;
+ }
+ }
+}
+
+static int ag71xx_ether_rx(struct eth_device *edev)
+{
+ struct ag71xx *priv = edev->priv;
+ ag7240_desc_t *f;
+ unsigned int work_done;
+
+ for (work_done = 0; work_done < NO_OF_RX_FIFOS; work_done++) {
+ unsigned int pktlen;
+ unsigned char *rx_pkt;
+
+ f = &priv->fifo_rx[priv->next_rx];
+
+ if (f->is_empty)
+ break;
+
+ pktlen = f->pkt_size;
+ rx_pkt = priv->rx_pkt[priv->next_rx];
+
+ /* invalidate */
+ dma_sync_single_for_cpu((unsigned long)rx_pkt, pktlen,
+ DMA_FROM_DEVICE);
+
+ net_receive(edev, rx_pkt, pktlen - 4);
+
+ f->is_empty = 1;
+
+ priv->next_rx = (priv->next_rx + 1) % NO_OF_RX_FIFOS;
+ }
+
+ if (!(ag71xx_rr(priv, AG71XX_REG_RX_CTRL) & RX_CTRL_RXE)) {
+ f = &priv->fifo_rx[priv->next_rx];
+ ag71xx_wr(priv, AG71XX_REG_RX_DESC, virt_to_phys(f));
+ ag71xx_wr(priv, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+ }
+
+ return work_done;
+}
+
+static int ag71xx_ether_send(struct eth_device *edev, void *packet, int length)
+{
+ struct ag71xx *priv = edev->priv;
+ struct device_d *dev = priv->dev;
+ ag7240_desc_t *f = &priv->fifo_tx[priv->next_tx];
+ uint64_t start;
+ int ret = 0;
+
+ /* flush */
+ dma_sync_single_for_device((unsigned long)packet, length, DMA_TO_DEVICE);
+
+ f->pkt_start_addr = virt_to_phys(packet);
+ f->res1 = 0;
+ f->pkt_size = length;
+ f->is_empty = 0;
+ ag71xx_wr(priv, AG71XX_REG_TX_DESC, virt_to_phys(f));
+ ag71xx_wr(priv, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
+
+ /* flush again?! */
+ dma_sync_single_for_cpu((unsigned long)packet, length, DMA_TO_DEVICE);
+
+ start = get_time_ns();
+ while (!f->is_empty) {
+ if (!is_timeout_non_interruptible(start, 100 * USECOND))
+ continue;
+
+ dev_err(dev, "error: tx timed out\n");
+ ret = -ETIMEDOUT;
+ break;
+ }
+
+ f->pkt_start_addr = 0;
+ f->pkt_size = 0;
+
+ priv->next_tx = (priv->next_tx + 1) % NO_OF_TX_FIFOS;
+
+ return ret;
+}
+
+static int ag71xx_ether_open(struct eth_device *edev)
+{
+ struct ag71xx *priv = edev->priv;
+ const struct ag71xx_cfg *cfg = priv->cfg;
+
+ if (AG71XX_TYPE_AR9344_GMAC0 == cfg->type)
+ return phy_device_connect(edev, &priv->miibus, 0,
+ NULL, 0, PHY_INTERFACE_MODE_RGMII_TXID);
+
+ return 0;
+}
+
+static int ag71xx_ether_init(struct eth_device *edev)
+{
+ struct ag71xx *priv = edev->priv;
+ int i;
+ void *rxbuf = priv->rx_buffer;
+
+ priv->next_rx = 0;
+
+ for (i = 0; i < NO_OF_RX_FIFOS; i++) {
+ ag7240_desc_t *fr = &priv->fifo_rx[i];
+
+ priv->rx_pkt[i] = rxbuf;
+ fr->pkt_start_addr = virt_to_phys(rxbuf);
+ fr->pkt_size = MAX_RBUFF_SZ;
+ fr->is_empty = 1;
+ fr->next_desc = virt_to_phys(&priv->fifo_rx[(i + 1) % NO_OF_RX_FIFOS]);
+
+ /* invalidate */
+ dma_sync_single_for_device((unsigned long)rxbuf, MAX_RBUFF_SZ,
+ DMA_FROM_DEVICE);
+
+ rxbuf += MAX_RBUFF_SZ;
+ }
+
+ /* Clean Tx BD's */
+ memset(priv->fifo_tx, 0, TX_RING_SZ);
+
+ ag71xx_wr(priv, AG71XX_REG_RX_DESC, virt_to_phys(priv->fifo_rx));
+ ag71xx_wr(priv, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+
+ return 1;
+}
+
+static void ag71xx_ar9331_ge0_mii_init(struct ag71xx *priv)
+{
+ u32 rd;
+
+ rd = ag71xx_rr(priv, AG71XX_REG_MAC_CFG2);
+ rd |= (MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK | MAC_CFG2_IF_10_100);
+ ag71xx_wr(priv, AG71XX_REG_MAC_CFG2, rd);
+
+ /* config FIFOs */
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG0, 0x1f00);
+
+ rd = ag71xx_gmac_rr(priv, AG71XX_REG_MAC_CFG1);
+ rd |= AG71XX_ETH_CFG_MII_GE0_SLAVE;
+ ag71xx_gmac_wr(priv, 0, rd);
+}
+
+static void ag71xx_ar9344_gmac0_mii_init(struct ag71xx *priv)
+{
+ u32 rd;
+
+ rd = ag71xx_rr(priv, AG71XX_REG_MAC_CFG2);
+ rd |= (MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK | MAC_CFG2_IF_1000);
+ ag71xx_wr(priv, AG71XX_REG_MAC_CFG2, rd);
+
+ /* config FIFOs */
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG0, 0x1f00);
+
+ ag71xx_gmac_wr(priv, AG71XX_REG_MAC_CFG1, 1);
+ udelay(1000);
+ ag71xx_wr(priv, AG71XX_REG_MII_CFG, 4 | (1 << 31));
+ ag71xx_wr(priv, AG71XX_REG_MII_CFG, 4);
+}
+
+static struct ag71xx_cfg ag71xx_cfg_ar9331_ge0 = {
+ .type = AG71XX_TYPE_AR9331_GE0,
+ .init_mii = ag71xx_ar9331_ge0_mii_init,
+};
+
+static struct ag71xx_cfg ag71xx_cfg_ar9344_gmac0 = {
+ .type = AG71XX_TYPE_AR9344_GMAC0,
+ .init_mii = ag71xx_ar9344_gmac0_mii_init,
+};
+
+static int ag71xx_probe(struct device_d *dev)
+{
+ void __iomem *regs, *regs_gmac;
+ struct mii_bus *miibus;
+ struct eth_device *edev;
+ struct ag71xx_cfg *cfg;
+ struct ag71xx *priv;
+ u32 mac_h, mac_l;
+ u32 rd, mask;
+ int ret;
+
+ ret = dev_get_drvdata(dev, (const void **)&cfg);
+ if (ret)
+ return ret;
+
+ regs_gmac = dev_request_mem_region_by_name(dev, "gmac");
+ if (IS_ERR(regs_gmac))
+ return PTR_ERR(regs_gmac);
+
+ regs = dev_request_mem_region_by_name(dev, "ge0");
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ priv = xzalloc(sizeof(struct ag71xx));
+ edev = &priv->netdev;
+ miibus = &priv->miibus;
+ edev->priv = priv;
+
+ edev->init = ag71xx_ether_init;
+ edev->open = ag71xx_ether_open;
+ edev->send = ag71xx_ether_send;
+ edev->recv = ag71xx_ether_rx;
+ edev->halt = ag71xx_ether_halt;
+ edev->get_ethaddr = ag71xx_ether_get_ethaddr;
+ edev->set_ethaddr = ag71xx_ether_set_ethaddr;
+
+ priv->dev = dev;
+ priv->regs = regs;
+ priv->regs_gmac = regs_gmac;
+ priv->cfg = cfg;
+
+ miibus->read = ag71xx_ether_mii_read;
+ miibus->write = ag71xx_ether_mii_write;
+ miibus->priv = priv;
+
+ /* enable switch core */
+ rd = ar7240_reg_rd(AR71XX_PLL_BASE + AR933X_ETHSW_CLOCK_CONTROL_REG);
+ rd &= ~(0x1f);
+ rd |= 0x10;
+ if ((ar7240_reg_rd(WASP_BOOTSTRAP_REG) & WASP_REF_CLK_25) == 0)
+ rd |= 0x1;
+ ar7240_reg_wr((AR71XX_PLL_BASE + AR933X_ETHSW_CLOCK_CONTROL_REG), rd);
+
+ if (ath79_reset_rr(AR933X_RESET_REG_RESET_MODULE) != 0)
+ ath79_reset_wr(AR933X_RESET_REG_RESET_MODULE, 0);
+
+ /* reset GE0 MAC and MDIO */
+ mask = AR933X_RESET_GE0_MAC | AR933X_RESET_GE0_MDIO
+ | AR933X_RESET_SWITCH;
+
+ rd = ath79_reset_rr(AR933X_RESET_REG_RESET_MODULE);
+ rd |= mask;
+ ath79_reset_wr(AR933X_RESET_REG_RESET_MODULE, rd);
+ mdelay(100);
+
+ rd = ath79_reset_rr(AR933X_RESET_REG_RESET_MODULE);
+ rd &= ~(mask);
+ ath79_reset_wr(AR933X_RESET_REG_RESET_MODULE, rd);
+ mdelay(100);
+
+ ag71xx_wr(priv, AG71XX_REG_MAC_CFG1,
+ (MAC_CFG1_SR | MAC_CFG1_TX_RST | MAC_CFG1_RX_RST));
+ ag71xx_wr(priv, AG71XX_REG_MAC_CFG1,
+ (MAC_CFG1_RXE | MAC_CFG1_TXE));
+
+ if (cfg->init_mii)
+ cfg->init_mii(priv);
+
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG1, 0x10ffff);
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG2, 0xaaa0555);
+
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG4, 0x3ffff);
+ /* bit 19 should be set to 1 for GE0 */
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG5, (0x66b82) | (1 << 19));
+ ag71xx_wr(priv, AG71XX_REG_FIFO_CFG3, 0x1f00140);
+
+ priv->rx_buffer = xmemalign(PAGE_SIZE, NO_OF_RX_FIFOS * MAX_RBUFF_SZ);
+ priv->fifo_tx = dma_alloc_coherent(NO_OF_TX_FIFOS * sizeof(ag7240_desc_t),
+ &priv->addr_tx);
+ priv->fifo_rx = dma_alloc_coherent(NO_OF_RX_FIFOS * sizeof(ag7240_desc_t),
+ &priv->addr_rx);
+ priv->next_tx = 0;
+
+ mac_l = 0x3344;
+ mac_h = 0x0004d980;
+
+ ag71xx_wr(priv, AG71XX_REG_MAC_ADDR1, mac_l);
+ ag71xx_wr(priv, AG71XX_REG_MAC_ADDR2, mac_h);
+
+ mdiobus_register(miibus);
+ eth_register(edev);
+
+ dev_info(dev, "network device registered\n");
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id ag71xx_dt_ids[] = {
+ { .compatible = "qca,ar9331-ge0", .data = &ag71xx_cfg_ar9331_ge0, },
+ { .compatible = "qca,ar9344-gmac0", .data = &ag71xx_cfg_ar9344_gmac0, },
+ { /* sentinel */ }
+};
+
+static struct driver_d ag71xx_driver = {
+ .name = "ag71xx-gmac",
+ .probe = ag71xx_probe,
+ .of_compatible = DRV_OF_COMPAT(ag71xx_dt_ids),
+};
+device_platform_driver(ag71xx_driver);
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver
2017-09-13 14:15 ` [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver Oleksij Rempel
@ 2017-09-14 6:44 ` Sascha Hauer
0 siblings, 0 replies; 12+ messages in thread
From: Sascha Hauer @ 2017-09-14 6:44 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox
On Wed, Sep 13, 2017 at 04:15:57PM +0200, Oleksij Rempel wrote:
> +static void ag71xx_ether_halt(struct eth_device *edev)
> +{
> + struct ag71xx *priv = edev->priv;
> + struct device_d *dev = priv->dev;
> + uint64_t start;
> +
> + ag71xx_wr(priv, AG71XX_REG_RX_CTRL, 0);
> + start = get_time_ns();
> + while (ag71xx_rr(priv, AG71XX_REG_RX_CTRL)) {
> + if (!is_timeout_non_interruptible(start, 100 * USECOND)) {
> + dev_err(dev, "error: filed to stop device!\n");
s/filed/failed/
Also the test seems to be the wrong way round.
> +static int ag71xx_ether_init(struct eth_device *edev)
> +{
> + struct ag71xx *priv = edev->priv;
> + int i;
> + void *rxbuf = priv->rx_buffer;
> +
> + priv->next_rx = 0;
> +
> + for (i = 0; i < NO_OF_RX_FIFOS; i++) {
> + ag7240_desc_t *fr = &priv->fifo_rx[i];
> +
> + priv->rx_pkt[i] = rxbuf;
> + fr->pkt_start_addr = virt_to_phys(rxbuf);
> + fr->pkt_size = MAX_RBUFF_SZ;
> + fr->is_empty = 1;
> + fr->next_desc = virt_to_phys(&priv->fifo_rx[(i + 1) % NO_OF_RX_FIFOS]);
> +
> + /* invalidate */
> + dma_sync_single_for_device((unsigned long)rxbuf, MAX_RBUFF_SZ,
> + DMA_FROM_DEVICE);
> +
> + rxbuf += MAX_RBUFF_SZ;
> + }
> +
> + /* Clean Tx BD's */
> + memset(priv->fifo_tx, 0, TX_RING_SZ);
> +
> + ag71xx_wr(priv, AG71XX_REG_RX_DESC, virt_to_phys(priv->fifo_rx));
> + ag71xx_wr(priv, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
> +
> + return 1;
Although the return code is not tested by the caller, this function
should return 0 for success.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 02/10] add ar9331.dtsi and enable mac0
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
2017-09-13 14:15 ` [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver Oleksij Rempel
@ 2017-09-13 14:15 ` Oleksij Rempel
2017-09-13 14:15 ` [PATCH v2 03/10] MIPS: dts: ar9344: add mac0 node Oleksij Rempel
` (7 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:15 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/dts/ar9331.dtsi | 12 ++++++++++++
arch/mips/dts/tplink-mr3020.dts | 5 +++++
2 files changed, 17 insertions(+)
create mode 100644 arch/mips/dts/ar9331.dtsi
diff --git a/arch/mips/dts/ar9331.dtsi b/arch/mips/dts/ar9331.dtsi
new file mode 100644
index 000000000..b4b8b766b
--- /dev/null
+++ b/arch/mips/dts/ar9331.dtsi
@@ -0,0 +1,12 @@
+/ {
+ ahb {
+ mac0: mac@19000000 {
+ compatible = "qca,ar9331-ge0";
+ reg = <0x18070000 0x00000100>,
+ <0x19000000 0x01000000>;
+ reg-names = "gmac", "ge0";
+ phy-mode = "mii";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
index eaae11edd..6f1ad1350 100644
--- a/arch/mips/dts/tplink-mr3020.dts
+++ b/arch/mips/dts/tplink-mr3020.dts
@@ -1,4 +1,5 @@
#include <mips/qca/ar9331_tl_mr3020.dts>
+#include "ar9331.dtsi"
/ {
aliases {
@@ -24,3 +25,7 @@
reg = <0x80000 0x10000>;
};
};
+
+&mac0 {
+ status = "okay";
+};
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 03/10] MIPS: dts: ar9344: add mac0 node
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
2017-09-13 14:15 ` [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver Oleksij Rempel
2017-09-13 14:15 ` [PATCH v2 02/10] add ar9331.dtsi and enable mac0 Oleksij Rempel
@ 2017-09-13 14:15 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 04/10] MIPS: dts: tl_wdr4300: enable mac0 Oleksij Rempel
` (6 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:15 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
this node is supported by ag71xx driver
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/dts/ar9344.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/mips/dts/ar9344.dtsi b/arch/mips/dts/ar9344.dtsi
index 0838e8d7f..858751112 100644
--- a/arch/mips/dts/ar9344.dtsi
+++ b/arch/mips/dts/ar9344.dtsi
@@ -40,6 +40,16 @@
status = "disabled";
};
+ mac0: mac@19000000 {
+ compatible = "qca,ar9344-gmac0";
+ reg = <0x18070000 0x00000100>,
+ <0x19000000 0x01000000>;
+ reg-names = "gmac", "ge0";
+ phy-mode = "rgmii";
+
+ status = "disabled";
+ };
+
spi: spi@1f000000 {
compatible = "qca,ar7100-spi", "qca,ar9344-spi";
reg = <0x1f000000 0x1c>;
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 04/10] MIPS: dts: tl_wdr4300: enable mac0
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (2 preceding siblings ...)
2017-09-13 14:15 ` [PATCH v2 03/10] MIPS: dts: ar9344: add mac0 node Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash Oleksij Rempel
` (5 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/dts/ar9344_tl_wdr4300.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/mips/dts/ar9344_tl_wdr4300.dts b/arch/mips/dts/ar9344_tl_wdr4300.dts
index b02c1d730..5a4a6f379 100644
--- a/arch/mips/dts/ar9344_tl_wdr4300.dts
+++ b/arch/mips/dts/ar9344_tl_wdr4300.dts
@@ -61,3 +61,7 @@
};
};
};
+
+&mac0 {
+ status = "okay";
+};
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (3 preceding siblings ...)
2017-09-13 14:16 ` [PATCH v2 04/10] MIPS: dts: tl_wdr4300: enable mac0 Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition Oleksij Rempel
` (4 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
to unify the naming with TP-Link TL-MR3020.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/dts/ar9344_tl_wdr4300.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/dts/ar9344_tl_wdr4300.dts b/arch/mips/dts/ar9344_tl_wdr4300.dts
index 5a4a6f379..c784e6cb4 100644
--- a/arch/mips/dts/ar9344_tl_wdr4300.dts
+++ b/arch/mips/dts/ar9344_tl_wdr4300.dts
@@ -11,6 +11,7 @@
aliases {
serial0 = &uart0;
+ spiflash = &spiflash;
};
memory@0 {
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (4 preceding siblings ...)
2017-09-13 14:16 ` [PATCH v2 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 07/10] add phy: ar8327 driver Oleksij Rempel
` (3 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
we need it RW for barebox updates.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/dts/ar9344_tl_wdr4300.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/mips/dts/ar9344_tl_wdr4300.dts b/arch/mips/dts/ar9344_tl_wdr4300.dts
index c784e6cb4..139717a6b 100644
--- a/arch/mips/dts/ar9344_tl_wdr4300.dts
+++ b/arch/mips/dts/ar9344_tl_wdr4300.dts
@@ -53,7 +53,6 @@
partition@0 {
label = "barebox";
reg = <0 0x80000>;
- read-only;
};
partition@80000 {
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 07/10] add phy: ar8327 driver
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (5 preceding siblings ...)
2017-09-13 14:16 ` [PATCH v2 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7 Oleksij Rempel
` (2 subsequent siblings)
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
drivers/net/phy/Kconfig | 5 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/ar8327.c | 280 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 286 insertions(+)
create mode 100644 drivers/net/phy/ar8327.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d30f65b8e..ea2e06265 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -8,6 +8,11 @@ if PHYLIB
comment "MII PHY device drivers"
+config AR8327N_PHY
+ bool "Driver for QCA AR8327N PHYs"
+ ---help---
+ Currently supports the AR8327N PHY.
+
config AT803X_PHY
bool "Driver for Atheros AT803X PHYs"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 10732f807..13b8f6545 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,4 +1,5 @@
obj-y += phy.o mdio_bus.o
+obj-$(CONFIG_AR8327N_PHY) += ar8327.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_MARVELL_PHY) += marvell.o
diff --git a/drivers/net/phy/ar8327.c b/drivers/net/phy/ar8327.c
new file mode 100644
index 000000000..a0b10021d
--- /dev/null
+++ b/drivers/net/phy/ar8327.c
@@ -0,0 +1,280 @@
+/*
+ * Copyright (C) 2017 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/phy.h>
+#include <linux/string.h>
+
+#define ATHR_PHY_MAX 5
+
+/*****************/
+/* PHY Registers */
+/*****************/
+#define ATHR_PHY_CONTROL 0x00
+#define ATHR_PHY_STATUS 0x01
+#define ATHR_PHY_ID1 0x02
+#define ATHR_PHY_ID2 0x03
+#define ATHR_AUTONEG_ADVERT 0x04
+#define ATHR_LINK_PARTNER_ABILITY 0x05
+#define ATHR_AUTONEG_EXPANSION 0x06
+#define ATHR_NEXT_PAGE_TRANSMIT 0x07
+#define ATHR_LINK_PARTNER_NEXT_PAGE 0x08
+#define ATHR_1000BASET_CONTROL 0x09
+#define ATHR_1000BASET_STATUS 0x0a
+#define ATHR_PHY_SPEC_CONTROL 0x10
+#define ATHR_PHY_SPEC_STATUS 0x11
+#define ATHR_DEBUG_PORT_ADDRESS 0x1d
+#define ATHR_DEBUG_PORT_DATA 0x1e
+
+/* Advertisement register. */
+#define ATHR_ADVERTISE_ASYM_PAUSE 0x0800
+#define ATHR_ADVERTISE_PAUSE 0x0400
+#define ATHR_ADVERTISE_100FULL 0x0100
+#define ATHR_ADVERTISE_100HALF 0x0080
+#define ATHR_ADVERTISE_10FULL 0x0040
+#define ATHR_ADVERTISE_10HALF 0x0020
+
+#define ATHR_ADVERTISE_ALL (ATHR_ADVERTISE_ASYM_PAUSE | ATHR_ADVERTISE_PAUSE | \
+ ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL | \
+ ATHR_ADVERTISE_100HALF | ATHR_ADVERTISE_100FULL)
+
+/* ATHR_PHY_CONTROL fields */
+#define ATHR_CTRL_SOFTWARE_RESET 0x8000
+#define ATHR_CTRL_AUTONEGOTIATION_ENABLE 0x1000
+
+/* 1000BASET_CONTROL */
+#define ATHR_ADVERTISE_1000FULL 0x0200
+
+/* Phy Specific status fields */
+#define ATHR_STATUS_LINK_PASS 0x0400
+
+static u32 ar8327n_reg_read(struct phy_device *phydev, u32 reg_addr)
+{
+ u32 reg_word_addr;
+ u32 phy_addr, tmp_val, reg_val;
+ u16 phy_val;
+ u8 phy_reg;
+
+ /* change reg_addr to 16-bit word address, 32-bit aligned */
+ reg_word_addr = (reg_addr & 0xfffffffc) >> 1;
+
+ /* configure register high address */
+ phy_addr = 0x18;
+ phy_reg = 0x0;
+ phy_val = (u16) ((reg_word_addr >> 8) & 0x1ff); /* bit16-8 of reg address */
+ mdiobus_write(phydev->bus, phy_addr, phy_reg, phy_val);
+
+ /* For some registers such as MIBs, since it is read/clear, we should */
+ /* read the lower 16-bit register then the higher one */
+
+ /* read register in lower address */
+ phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+ phy_reg = (u8) (reg_word_addr & 0x1f); /* bit4-0 of reg address */
+ reg_val = (u32) mdiobus_read(phydev->bus, phy_addr, phy_reg);
+
+ /* read register in higher address */
+ reg_word_addr++;
+ phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+ phy_reg = (u8) (reg_word_addr & 0x1f); /* bit4-0 of reg address */
+ reg_val = (u32) mdiobus_read(phydev->bus, phy_addr, phy_reg);
+ reg_val |= (tmp_val << 16);
+
+ return reg_val;
+}
+
+static void ar8327n_reg_write(struct phy_device *phydev, u32 reg_addr,
+ u32 reg_val)
+{
+ u32 reg_word_addr;
+ u32 phy_addr;
+ u16 phy_val;
+ u8 phy_reg;
+
+ /* change reg_addr to 16-bit word address, 32-bit aligned */
+ reg_word_addr = (reg_addr & 0xfffffffc) >> 1;
+
+ /* configure register high address */
+ phy_addr = 0x18;
+ phy_reg = 0x0;
+ phy_val = (u16) ((reg_word_addr >> 8) & 0x1ff); /* bit16-8 of reg address */
+ mdiobus_write(phydev->bus, phy_addr, phy_reg, phy_val);
+
+ /* For some registers such as ARL and VLAN, since they include BUSY bit */
+ /* in lower address, we should write the higher 16-bit register then the */
+ /* lower one */
+
+ /* read register in higher address */
+ reg_word_addr++;
+ phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+ phy_reg = (u8) (reg_word_addr & 0x1f); /* bit4-0 of reg address */
+ phy_val = (u16) ((reg_val >> 16) & 0xffff);
+ mdiobus_write(phydev->bus, phy_addr, phy_reg, phy_val);
+
+ /* write register in lower address */
+ reg_word_addr--;
+ phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+ phy_reg = (u8) (reg_word_addr & 0x1f); /* bit4-0 of reg address */
+ phy_val = (u16) (reg_val & 0xffff);
+ mdiobus_write(phydev->bus, phy_addr, phy_reg, phy_val);
+}
+
+static int ar8327n_phy_is_link_alive(struct phy_device *phydev, int phy_addr)
+{
+ u16 val;
+
+ val = mdiobus_read(phydev->bus, phy_addr, ATHR_PHY_SPEC_STATUS);
+
+ return !!(val & ATHR_STATUS_LINK_PASS);
+}
+
+static int ar8327n_phy_setup(struct phy_device *phydev)
+{
+ struct device_d *dev = &phydev->dev;
+ int phy_addr;
+
+ /* start auto negotiation on each phy */
+ for (phy_addr = 0; phy_addr < ATHR_PHY_MAX; phy_addr++) {
+ mdiobus_write(phydev->bus, phy_addr, ATHR_AUTONEG_ADVERT,
+ ATHR_ADVERTISE_ALL);
+
+ mdiobus_write(phydev->bus, phy_addr, ATHR_1000BASET_CONTROL,
+ ATHR_ADVERTISE_1000FULL);
+
+ /* Reset PHYs*/
+ mdiobus_write(phydev->bus, phy_addr, ATHR_PHY_CONTROL,
+ ATHR_CTRL_AUTONEGOTIATION_ENABLE
+ | ATHR_CTRL_SOFTWARE_RESET);
+ }
+
+ /*
+ * After the phy is reset, it takes a little while before
+ * it can respond properly.
+ */
+ mdelay(1000);
+
+ for (phy_addr = 0; phy_addr < ATHR_PHY_MAX; phy_addr++) {
+ int count;
+
+ for (count = 20; count > 0; count--) {
+ u16 val;
+ val = mdiobus_read(phydev->bus, phy_addr,
+ ATHR_PHY_CONTROL);
+
+ if (!(val & ATHR_CTRL_SOFTWARE_RESET))
+ break;
+
+ mdelay(150);
+ }
+
+ if (!count) {
+ dev_err(dev, "error: port %d, negotiation timeout.\n",
+ phy_addr);
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int ar8327n_get_link(struct phy_device *phydev)
+{
+ int phy_addr;
+ int live_links = 0;
+
+ for (phy_addr = 0; phy_addr < ATHR_PHY_MAX; phy_addr++) {
+ if (ar8327n_phy_is_link_alive(phydev, phy_addr))
+ live_links++;
+ }
+
+ return (live_links > 0);
+}
+
+static int ar8327n_config_init(struct phy_device *phydev)
+{
+ struct device_d *dev = &phydev->dev;
+ int phy_addr = 0;
+
+ if (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)
+ return 0;
+
+ /* if using header for register configuration, we have to */
+ /* configure s17 register after frame transmission is enabled */
+
+ /* configure the RGMII */
+ ar8327n_reg_write(phydev, 0x624, 0x7f7f7f7f);
+ ar8327n_reg_write(phydev, 0x10, 0x40000000);
+ ar8327n_reg_write(phydev, 0x4, 0x07600000);
+ ar8327n_reg_write(phydev, 0xc, 0x01000000);
+ ar8327n_reg_write(phydev, 0x7c, 0x0000007e);
+
+ /* AR8327/AR8328 v1.0 fixup */
+ if ((ar8327n_reg_read(phydev, 0x0) & 0xffff) == 0x1201) {
+ dev_warn(dev, "warning: untested device. PHY v1.0\n");
+ for (phy_addr = 0x0; phy_addr <= ATHR_PHY_MAX; phy_addr++) {
+ /* For 100M waveform */
+ mdiobus_write(phydev->bus, phy_addr, 0x1d, 0x0);
+ mdiobus_write(phydev->bus, phy_addr, 0x1e, 0x02ea);
+ /* Turn On Gigabit Clock */
+ mdiobus_write(phydev->bus, phy_addr, 0x1d, 0x3d);
+ mdiobus_write(phydev->bus, phy_addr, 0x1e, 0x68a0);
+ }
+ }
+
+ /*
+ * set the WAN Port(Port1) Disable Mode so
+ * it can not receive or transmit any frames.
+ */
+ ar8327n_reg_write(phydev, 0x066c,
+ ar8327n_reg_read(phydev, 0x066c) & 0xfff8ffff);
+
+ ar8327n_phy_setup(phydev);
+
+ return 0;
+}
+
+static int ar8327n_read_status(struct phy_device *phydev)
+{
+ /* for GMAC0 we have only one static mode */
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+ phydev->pause = phydev->asym_pause = 0;
+ phydev->link = ar8327n_get_link(phydev);
+ return 0;
+}
+
+static int ar8327n_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int ar8327n_aneg_done(struct phy_device *phydev)
+{
+ return BMSR_ANEGCOMPLETE;
+}
+
+static struct phy_driver ar8327n_driver[] = {
+{
+ /* QCA AR8327N */
+ .phy_id = 0x004dd034,
+ .phy_id_mask = 0xffffffef,
+ .drv.name = "QCA AR8327N switch",
+ .config_init = ar8327n_config_init,
+ .features = PHY_GBIT_FEATURES,
+ .config_aneg = &ar8327n_config_aneg,
+ .read_status = &ar8327n_read_status,
+ .aneg_done = &ar8327n_aneg_done,
+}};
+
+static int atheros_phy_init(void)
+{
+ return phy_drivers_register(ar8327n_driver,
+ ARRAY_SIZE(ar8327n_driver));
+}
+fs_initcall(atheros_phy_init);
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (6 preceding siblings ...)
2017-09-13 14:16 ` [PATCH v2 07/10] add phy: ar8327 driver Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 09/10] MIPS: tplink-wdr4300_defconfig: add network support Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 10/10] MIPS: dts: ar9344: add APB bus Oleksij Rempel
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
The minor version of TP-Link are usually big enough that it need
extra vendor partition on the flash with additional configurations like
PLL, CPU and RAM freqs.
Visually I was able to confirm at least different SPI Flash and RAM
chips.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/configs/tplink-wdr4300_defconfig | 2 +-
arch/mips/dts/{ar9344_tl_wdr4300.dts => ar9344-tl-wdr4300-v1.7.dts} | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
rename arch/mips/dts/{ar9344_tl_wdr4300.dts => ar9344-tl-wdr4300-v1.7.dts} (91%)
diff --git a/arch/mips/configs/tplink-wdr4300_defconfig b/arch/mips/configs/tplink-wdr4300_defconfig
index 63189b754..b5be221f6 100644
--- a/arch/mips/configs/tplink-wdr4300_defconfig
+++ b/arch/mips/configs/tplink-wdr4300_defconfig
@@ -1,5 +1,5 @@
CONFIG_BUILTIN_DTB=y
-CONFIG_BUILTIN_DTB_NAME="ar9344_tl_wdr4300"
+CONFIG_BUILTIN_DTB_NAME="ar9344-tl-wdr4300-v1.7"
CONFIG_MACH_MIPS_ATH79=y
CONFIG_BOARD_TPLINK_WDR4300=y
CONFIG_PBL_IMAGE=y
diff --git a/arch/mips/dts/ar9344_tl_wdr4300.dts b/arch/mips/dts/ar9344-tl-wdr4300-v1.7.dts
similarity index 91%
rename from arch/mips/dts/ar9344_tl_wdr4300.dts
rename to arch/mips/dts/ar9344-tl-wdr4300-v1.7.dts
index 139717a6b..d16cab005 100644
--- a/arch/mips/dts/ar9344_tl_wdr4300.dts
+++ b/arch/mips/dts/ar9344-tl-wdr4300-v1.7.dts
@@ -6,8 +6,8 @@
#include "ar9344.dtsi"
/ {
- model = "TP-Link WDR4300";
- compatible = "tplink,tl-wdr4300";
+ model = "TP-Link WDR4300 v1.7";
+ compatible = "tplink,tl-wdr4300", "tplink,tl-wdr4300-v1.7";
aliases {
serial0 = &uart0;
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 09/10] MIPS: tplink-wdr4300_defconfig: add network support
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (7 preceding siblings ...)
2017-09-13 14:16 ` [PATCH v2 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7 Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
2017-09-13 14:16 ` [PATCH v2 10/10] MIPS: dts: ar9344: add APB bus Oleksij Rempel
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/configs/tplink-wdr4300_defconfig | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/mips/configs/tplink-wdr4300_defconfig b/arch/mips/configs/tplink-wdr4300_defconfig
index b5be221f6..46093d243 100644
--- a/arch/mips/configs/tplink-wdr4300_defconfig
+++ b/arch/mips/configs/tplink-wdr4300_defconfig
@@ -32,6 +32,10 @@ CONFIG_CMD_LET=y
CONFIG_CMD_MSLEEP=y
CONFIG_CMD_READF=y
CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_HOST=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
CONFIG_CMD_READLINE=y
@@ -55,15 +59,13 @@ CONFIG_CMD_TIME=y
CONFIG_NET=y
CONFIG_NET_NFS=y
CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_NET_DHCP=y
CONFIG_NET_SNTP=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_OF_BAREBOX_ENV_IN_FS=y
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_NET_AG71XX=y
-CONFIG_AT803X_PHY=y
+CONFIG_AR8327N_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_DRIVER_SPI_ATH79=y
@@ -74,5 +76,7 @@ CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
CONFIG_LED_TRIGGERS=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
CONFIG_DIGEST_SHA224_GENERIC=y
CONFIG_DIGEST_SHA256_GENERIC=y
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 10/10] MIPS: dts: ar9344: add APB bus
2017-09-13 14:15 [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331 Oleksij Rempel
` (8 preceding siblings ...)
2017-09-13 14:16 ` [PATCH v2 09/10] MIPS: tplink-wdr4300_defconfig: add network support Oleksij Rempel
@ 2017-09-13 14:16 ` Oleksij Rempel
9 siblings, 0 replies; 12+ messages in thread
From: Oleksij Rempel @ 2017-09-13 14:16 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
and move nodes which belong to APB.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/dts/ar9344.dtsi | 42 +++++++++++++++++++++++++-----------------
1 file changed, 25 insertions(+), 17 deletions(-)
diff --git a/arch/mips/dts/ar9344.dtsi b/arch/mips/dts/ar9344.dtsi
index 858751112..3e105174d 100644
--- a/arch/mips/dts/ar9344.dtsi
+++ b/arch/mips/dts/ar9344.dtsi
@@ -29,15 +29,33 @@
#address-cells = <1>;
#size-cells = <1>;
- uart0: uart@18020000 {
- compatible = "ns16550a", "qca,ar9344-uart0";
- reg = <0x18020000 0x20>;
+ apb {
+ compatible = "simple-bus";
+ ranges;
- reg-shift = <2>;
- reg-io-width = <4>;
- big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
- status = "disabled";
+ uart0: uart@18020000 {
+ compatible = "ns16550a", "qca,ar9344-uart0";
+ reg = <0x18020000 0x20>;
+
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ big-endian;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar7100-spi", "qca,ar9344-spi";
+ reg = <0x1f000000 0x1c>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
};
mac0: mac@19000000 {
@@ -49,15 +67,5 @@
status = "disabled";
};
-
- spi: spi@1f000000 {
- compatible = "qca,ar7100-spi", "qca,ar9344-spi";
- reg = <0x1f000000 0x1c>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "disabled";
- };
};
};
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread