mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig
Date: Fri, 29 Sep 2017 02:12:47 +0300	[thread overview]
Message-ID: <20170928231249.4158-9-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20170928231249.4158-1-antonynpavlov@gmail.com>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 arch/riscv/configs/erizo_generic_defconfig | 55 ++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/riscv/configs/erizo_generic_defconfig b/arch/riscv/configs/erizo_generic_defconfig
new file mode 100644
index 000000000..8ccad8934
--- /dev/null
+++ b/arch/riscv/configs/erizo_generic_defconfig
@@ -0,0 +1,55 @@
+CONFIG_32BIT=y
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="erizo_generic"
+# CONFIG_GLOBALVAR is not set
+CONFIG_TEXT_BASE=0x80000000
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x800e0000
+CONFIG_STACK_SIZE=0x20000
+CONFIG_MALLOC_BASE=0x80100000
+CONFIG_MALLOC_SIZE=0x100000
+CONFIG_MALLOC_TLSF=y
+CONFIG_PANIC_HANG=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+# CONFIG_BOOTM is not set
+# CONFIG_ENV_HANDLING is not set
+CONFIG_POLLER=y
+CONFIG_DEBUG_LL=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_CMP=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_OFDEVICE=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SPI_GPIO=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_MTD_M25P80=y
+CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
+CONFIG_EEPROM_AT25=y
+CONFIG_EEPROM_AT24=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_PINCTRL is not set
+CONFIG_DIGEST_CRC32_GENERIC=y
-- 
2.14.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-09-28 23:13 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-28 23:12 [RFC v4 00/10] add initial RISC-V architecture support Antony Pavlov
2017-09-28 23:12 ` [RFC v4 01/10] Add " Antony Pavlov
2017-09-29 12:07   ` Oleksij Rempel
2017-09-30 11:57     ` Antony Pavlov
2017-10-02  7:43       ` Oleksij Rempel
2017-10-02 14:08         ` Antony Pavlov
2017-10-02 10:04       ` Daniel Schultz
2017-10-02 22:15         ` Antony Pavlov
2017-10-02 10:08     ` Daniel Schultz
2017-10-02 22:21       ` Antony Pavlov
2017-10-05 10:55         ` Daniel Schultz
2017-10-06 15:39           ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 02/10] RISC-V: add Erizo SoC support Antony Pavlov
2017-09-29 12:18   ` Oleksij Rempel
2017-09-30 12:05     ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
2017-09-28 23:12 ` [RFC v4 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
2017-09-29 12:26   ` Oleksij Rempel
2017-09-30 12:22     ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
2017-09-28 23:12 ` [RFC v4 06/10] RISC-V: erizo: enable NMON Antony Pavlov
2017-09-28 23:12 ` [RFC v4 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
2017-09-28 23:12 ` Antony Pavlov [this message]
2017-09-29 12:29   ` [RFC v4 08/10] RISC-V: add erizo_generic_defconfig Oleksij Rempel
2017-09-30 12:38     ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 09/10] scripts: add nmon-loader Antony Pavlov
2017-09-28 23:12 ` [RFC v4 10/10] Documentation: add RISC-V docs Antony Pavlov
2017-09-29 12:35   ` Oleksij Rempel
2017-09-30 12:34     ` Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170928231249.4158-9-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox