From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1e80JG-0000lZ-Nj for barebox@lists.infradead.org; Fri, 27 Oct 2017 08:48:13 +0000 Date: Fri, 27 Oct 2017 10:47:45 +0200 From: Sascha Hauer Message-ID: <20171027084745.aeieqd6tsy3gpxnn@pengutronix.de> References: <20171026095917.2688-1-u.kleine-koenig@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20171026095917.2688-1-u.kleine-koenig@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH] usb: imx: implement support for "over-current-active-high" property To: Uwe =?iso-8859-15?Q?Kleine-K=F6nig?= Cc: barebox@lists.infradead.org On Thu, Oct 26, 2017 at 11:59:17AM +0200, Uwe Kleine-K=F6nig wrote: > This property is already documented in the bindings and supported by > Linux. As on i.MX25 the HW default is active high and up to now barebox > didn't force this to low (which is the default for e.g. i.MX6), add the > property to barebox' imx25.dtsi to keep existing behaviour. If on a > board the OC pin is active low, you need to add > = > /delete-property/ over-current-active-high; > = > in the board.dts. > = > Signed-off-by: Uwe Kleine-K=F6nig > --- Applied, thanks Sascha -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox