From: Sascha Hauer <s.hauer@pengutronix.de>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v1] i.MX: esdhc: optimize set_ios path
Date: Thu, 9 Nov 2017 21:13:09 +0100 [thread overview]
Message-ID: <20171109201309.sw4gv2deld7lial6@pengutronix.de> (raw)
In-Reply-To: <850b5981-f559-ca8b-c1fc-d04d5d1cf8a4@rempel-privat.de>
On Thu, Nov 09, 2017 at 06:08:30PM +0100, Oleksij Rempel wrote:
> Am 09.11.2017 um 11:04 schrieb Sascha Hauer:
> > On Wed, Nov 08, 2017 at 04:33:08PM +0100, Oleksij Rempel wrote:
> >> this part of code is executed at least 4 times in eMMC probe sequence.
> >> Optimizing it is reducing 20-30 msec of boot time.
> >>
> >> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> >> ---
> >> drivers/mci/imx-esdhc.c | 14 ++++++++++----
> >> 1 file changed, 10 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
> >> index 141d715c90..5c2a3a36e3 100644
> >> --- a/drivers/mci/imx-esdhc.c
> >> +++ b/drivers/mci/imx-esdhc.c
> >> @@ -95,6 +95,7 @@ struct fsl_esdhc_host {
> >> struct device_d *dev;
> >> struct clk *clk;
> >> const struct esdhc_soc_data *socdata;
> >> + u32 last_clock;
> >> };
> >>
> >> #define to_fsl_esdhc(mci) container_of(mci, struct fsl_esdhc_host, mci)
> >> @@ -408,7 +409,7 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
> >>
> >> static void set_sysctl(struct mci_host *mci, u32 clock)
> >> {
> >> - int div, pre_div;
> >> + int div, pre_div, i;
> >> struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
> >> void __iomem *regs = host->regs;
> >> int sdhc_clk = clk_get_rate(host->clk);
> >> @@ -453,13 +454,17 @@ static void set_sysctl(struct mci_host *mci, u32 clock)
> >> esdhc_clrsetbits32(regs + SDHCI_CLOCK_CONTROL__TIMEOUT_CONTROL__SOFTWARE_RESET,
> >> SYSCTL_CLOCK_MASK, clk);
> >>
> >> - wait_on_timeout(10 * MSECOND,
> >> - !(esdhc_read32(regs + SDHCI_PRESENT_STATE) & PRSSTAT_SDSTB));
> >> + for (i = 0; i < 1000; i++) {
> >> + if (esdhc_read32(regs + SDHCI_PRESENT_STATE) & PRSSTAT_SDSTB)
> >> + break;
> >> + udelay(10);
> >> + }
> >
> > I hope this hunk doesn't make anything better. If yes, we have a
> > problem.
>
> this is the part which need most of the time. Some times it will pass
> immediately or will take exactly 10ms.
Most likely because the condition is the wrong way round.
wait_on_timeout() waits for the condition to become true. We want to
wait until the PRSSTAT_SDSTB bit is set, so it should be:
wait_on_timeout(10 * MSECOND,
esdhc_read32(regs + SDHCI_PRESENT_STATE) & PRSSTAT_SDSTB);
/me looks git blame ... Damn, me!
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2017-11-09 20:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-08 15:33 Oleksij Rempel
2017-11-09 10:04 ` Sascha Hauer
2017-11-09 17:08 ` Oleksij Rempel
2017-11-09 20:13 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171109201309.sw4gv2deld7lial6@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=linux@rempel-privat.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox