* [PATCH v2 1/6] ARM: vybrid: zii: Make use of DT code from Linux kernel
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
@ 2017-12-04 15:27 ` Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 2/6] mdio_bus: Port of_mdio_find_bus() " Andrey Smirnov
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Andrey Smirnov @ 2017-12-04 15:27 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Now that vf610-zii-dev.dts, vf610-zii-dev-rev-b.dts and
vf610-zii-dev-rev-c.dts made their way from Linux to Barebox, convert
all relevant code to make use of them.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/dts/vf610-zii-cfu1-rev-a.dts | 3 +-
arch/arm/dts/vf610-zii-dev-rev-b.dts | 386 +----------------------------
arch/arm/dts/vf610-zii-dev-rev-c.dts | 391 +-----------------------------
arch/arm/dts/vf610-zii-dev.dtsi | 354 ---------------------------
arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts | 2 +
arch/arm/dts/vf610-zii-spu3-rev-a.dts | 4 +-
6 files changed, 9 insertions(+), 1131 deletions(-)
diff --git a/arch/arm/dts/vf610-zii-cfu1-rev-a.dts b/arch/arm/dts/vf610-zii-cfu1-rev-a.dts
index 4147d138b..7e87a15c1 100644
--- a/arch/arm/dts/vf610-zii-cfu1-rev-a.dts
+++ b/arch/arm/dts/vf610-zii-cfu1-rev-a.dts
@@ -42,9 +42,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+/dts-v1/;
+#include <arm/vf610-zii-dev.dtsi>
-/dts-v1/;
#include "vf610-zii-dev.dtsi"
/ {
diff --git a/arch/arm/dts/vf610-zii-dev-rev-b.dts b/arch/arm/dts/vf610-zii-dev-rev-b.dts
index bf0a01021..1eb01f44a 100644
--- a/arch/arm/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/dts/vf610-zii-dev-rev-b.dts
@@ -42,390 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/dts-v1/;
+#include <arm/vf610-zii-dev-rev-b.dts>
#include "vf610-zii-dev.dtsi"
-
-/*
- * =============================================================
- * The following code is shared with Linux kernel and should be
- * removed once it trickles down from there eventually
- * =============================================================
- */
-
-/ {
- model = "ZII VF610 Development Board, Rev B";
- compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
-
- mdio-mux {
- compatible = "mdio-mux-gpio";
- pinctrl-0 = <&pinctrl_mdio_mux>;
- pinctrl-names = "default";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
- &gpio0 9 GPIO_ACTIVE_HIGH
- &gpio0 24 GPIO_ACTIVE_HIGH
- &gpio0 25 GPIO_ACTIVE_HIGH>;
- mdio-parent-bus = <&mdio1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio_mux_1: mdio@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0: switch0@0 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- dsa,member = <0 0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan0";
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- switch0port5: port@5 {
- reg = <5>;
- label = "dsa";
- phy-mode = "rgmii-txid";
- link = <&switch1port6
- &switch2port9>;
- };
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&fec1>;
- fixed-link {
- speed = <100>;
- full-duplex;
- };
- };
- };
- };
- };
-
- mdio_mux_2: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch1: switch1@0 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- dsa,member = <0 1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan3";
- phy-handle = <&switch1phy0>;
- };
-
- port@1 {
- reg = <1>;
- label = "lan4";
- phy-handle = <&switch1phy1>;
- };
-
- port@2 {
- reg = <2>;
- label = "lan5";
- phy-handle = <&switch1phy2>;
- };
-
- switch1port5: port@5 {
- reg = <5>;
- label = "dsa";
- link = <&switch2port9>;
- phy-mode = "rgmii-txid";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- switch1port6: port@6 {
- reg = <6>;
- label = "dsa";
- phy-mode = "rgmii-txid";
- link = <&switch0port5>;
- };
- };
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- };
- switch1phy1: switch1phy0@1 {
- reg = <1>;
- };
- switch1phy2: switch1phy0@2 {
- reg = <2>;
- };
- };
- };
- };
-
- mdio_mux_4: mdio@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
-
- switch2: switch2@0 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- dsa,member = <0 2>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan6";
- };
-
- port@1 {
- reg = <1>;
- label = "lan7";
- };
-
- port@2 {
- reg = <2>;
- label = "lan8";
- };
-
- port@3 {
- reg = <3>;
- label = "optical3";
- fixed-link {
- speed = <1000>;
- full-duplex;
- link-gpios = <&gpio6 2
- GPIO_ACTIVE_HIGH>;
- };
- };
-
- port@4 {
- reg = <4>;
- label = "optical4";
- fixed-link {
- speed = <1000>;
- full-duplex;
- link-gpios = <&gpio6 3
- GPIO_ACTIVE_HIGH>;
- };
- };
-
- switch2port9: port@9 {
- reg = <9>;
- label = "dsa";
- phy-mode = "rgmii-txid";
- link = <&switch1port5
- &switch0port5>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
- };
-
- mdio_mux_8: mdio@8 {
- reg = <8>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- spi0 {
- compatible = "spi-gpio";
- pinctrl-0 = <&pinctrl_gpio_spi0>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH
- &gpio1 8 GPIO_ACTIVE_HIGH>;
- num-chipselects = <2>;
-
- m25p128@0 {
- compatible = "m25p128", "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <1000000>;
- };
-
- at93c46d@1 {
- compatible = "atmel,at93c46d";
- pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
- pinctrl-names = "default";
- #address-cells = <0>;
- #size-cells = <0>;
- reg = <1>;
- spi-max-frequency = <500000>;
- spi-cs-high;
- data-size = <16>;
- select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- status = "okay";
-
- gpio5: pca9554@20 {
- compatible = "nxp,pca9554";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
-
- };
-
- gpio6: pca9554@22 {
- compatible = "nxp,pca9554";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pca9554_22>;
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&gpio2>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- tca9548@70 {
- compatible = "nxp,pca9548";
- pinctrl-0 = <&pinctrl_i2c_mux_reset>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- sfp1: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- sfp2: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- sfp3: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- sfp4: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- };
-
- i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
- };
-};
-
-
-&iomuxc {
- pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
- fsl,pins = <
- VF610_PAD_PTE27__GPIO_132 0x33e2
- >;
- };
-
- pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
- fsl,pins = <
- VF610_PAD_PTB22__GPIO_44 0x33e2
- VF610_PAD_PTB21__GPIO_43 0x33e2
- VF610_PAD_PTB20__GPIO_42 0x33e1
- VF610_PAD_PTB19__GPIO_41 0x33e2
- VF610_PAD_PTB18__GPIO_40 0x33e2
- >;
- };
-
- pinctrl_mdio_mux: pinctrl-mdio-mux {
- fsl,pins = <
- VF610_PAD_PTA18__GPIO_8 0x31c2
- VF610_PAD_PTA19__GPIO_9 0x31c2
- VF610_PAD_PTB2__GPIO_24 0x31c2
- VF610_PAD_PTB3__GPIO_25 0x31c2
- >;
- };
-
- pinctrl_pca9554_22: pinctrl-pca95540-22 {
- fsl,pins = <
- VF610_PAD_PTB28__GPIO_98 0x219d
- >;
- };
-};
-
-/*
- * =============================================================
- * End of shared part
- * =============================================================
-*/
diff --git a/arch/arm/dts/vf610-zii-dev-rev-c.dts b/arch/arm/dts/vf610-zii-dev-rev-c.dts
index 522894263..797b31bef 100644
--- a/arch/arm/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/dts/vf610-zii-dev-rev-c.dts
@@ -42,399 +42,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/dts-v1/;
+#include <arm/vf610-zii-dev-rev-c.dts>
#include "vf610-zii-dev.dtsi"
-/*
- * =============================================================
- * The following code is shared with Linux kernel and should be
- * removed once it trickles down from there eventually
- * =============================================================
- */
-
-/ {
- model = "ZII VF610 Development Board, Rev C";
- compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
-
- mdio-mux {
- compatible = "mdio-mux-gpio";
- pinctrl-0 = <&pinctrl_mdio_mux>;
- pinctrl-names = "default";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
- &gpio0 9 GPIO_ACTIVE_HIGH
- &gpio0 25 GPIO_ACTIVE_HIGH>;
- mdio-parent-bus = <&mdio1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio_mux_1: mdio@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0: switch0@0 {
- compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- dsa,member = <0 0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "cpu";
- ethernet = <&fec1>;
- fixed-link {
- speed = <100>;
- full-duplex;
- };
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- };
-
- port@4 {
- reg = <4>;
- label = "lan4";
- };
-
- switch0port10: port@10 {
- reg = <10>;
- label = "dsa";
- phy-mode = "xgmii";
- link = <&switch1port10>;
- };
- };
- };
- };
-
- mdio_mux_2: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch1: switch1@0 {
- compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- dsa,member = <0 1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- label = "lan5";
- };
-
- port@2 {
- reg = <2>;
- label = "lan6";
- };
-
- port@3 {
- reg = <3>;
- label = "lan7";
- };
-
- port@4 {
- reg = <4>;
- label = "lan8";
- };
-
-
- switch1port10: port@10 {
- reg = <10>;
- label = "dsa";
- phy-mode = "xgmii";
- link = <&switch0port10>;
- };
- };
- };
- };
-
- mdio_mux_4: mdio@4 {
- reg = <4>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-&dspi0 {
- bus-num = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dspi0>;
- status = "okay";
- spi-num-chipselects = <2>;
-
- m25p128@0 {
- compatible = "m25p128", "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
-
- atzb-rf-233@1 {
- compatible = "atmel,at86rf233";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctr_atzb_rf_233>;
-
- spi-max-frequency = <7500000>;
- reg = <1>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gpio3>;
- xtal-trim = /bits/ 8 <0x06>;
-
- sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
- reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-
- fsl,spi-cs-sck-delay = <180>;
- fsl,spi-sck-cs-delay = <250>;
- };
-};
-
-&dspi2 {
- bus-num = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dspi2>;
- status = "okay";
- spi-num-chipselects = <2>;
-};
-
-&i2c0 {
- /*
- * U712
- *
- * Exposed signals:
- * P1 - WE2_CMD
- * P2 - WE2_CLK
- */
- gpio5: pca9557@18 {
- compatible = "nxp,pca9557";
- reg = <0x18>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- /*
- * U121
- *
- * Exposed signals:
- * I/O0 - ENET_SWR_EN
- * I/O1 - ESW1_RESETn
- * I/O2 - ARINC_RESET
- * I/O3 - DD1_IO_RESET
- * I/O4 - ESW2_RESETn
- * I/O5 - ESW3_RESETn
- * I/O6 - ESW4_RESETn
- * I/O8 - TP909
- * I/O9 - FEM_SEL
- * I/O10 - WIFI_RESETn
- * I/O11 - PHY_RSTn
- * I/O12 - OPT1_SD
- * I/O13 - OPT2_SD
- * I/O14 - OPT1_TX_DIS
- * I/O15 - OPT2_TX_DIS
- */
- gpio6: sx1503@20 {
- compatible = "semtech,sx1503q";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sx1503_20>;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- gpio-controller;
- interrupt-controller;
-
- enet_swr_en {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "enet-swr-en";
- };
- };
-
- /*
- * U715
- *
- * Exposed signals:
- * IO0 - WE1_CLK
- * IO1 - WE1_CMD
- */
- gpio7: pca9554@22 {
- compatible = "nxp,pca9554";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
-
- };
-};
-
-&i2c1 {
- at24mac602@00 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- read-only;
- };
-};
-
-&i2c2 {
- tca9548@70 {
- compatible = "nxp,pca9548";
- pinctrl-0 = <&pinctrl_i2c_mux_reset>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- sfp2: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- sfp3: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
- };
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- status = "okay";
-};
-
-&gpio0 {
- eth0_intrp {
- gpio-hog;
- gpios = <23 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sx1503-irq";
- };
-};
-
-&gpio3 {
- eth0_intrp {
- gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "eth0-intrp";
- };
-};
-
-&fec0 {
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec0_phy_int>;
-
- interrupt-parent = <&gpio3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- reg = <0>;
- };
- };
-};
-
-&iomuxc {
- pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
- fsl,pins = <
- VF610_PAD_PTB2__GPIO_24 0x31c2
- VF610_PAD_PTE27__GPIO_132 0x33e2
- >;
- };
-
-
- pinctrl_sx1503_20: pinctrl-sx1503-20 {
- fsl,pins = <
- VF610_PAD_PTB1__GPIO_23 0x219d
- >;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- VF610_PAD_PTA20__UART3_TX 0x21a2
- VF610_PAD_PTA21__UART3_RX 0x21a1
- >;
- };
-
- pinctrl_mdio_mux: pinctrl-mdio-mux {
- fsl,pins = <
- VF610_PAD_PTA18__GPIO_8 0x31c2
- VF610_PAD_PTA19__GPIO_9 0x31c2
- VF610_PAD_PTB3__GPIO_25 0x31c2
- >;
- };
-
- pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
- fsl,pins = <
- VF610_PAD_PTB28__GPIO_98 0x219d
- >;
- };
-};
-
-/*
- * =============================================================
- * End of shared part
- * =============================================================
- */
-
-
&dspi0 {
m25p128@0 {
partition@0 {
diff --git a/arch/arm/dts/vf610-zii-dev.dtsi b/arch/arm/dts/vf610-zii-dev.dtsi
index dae077ced..4bf81451a 100644
--- a/arch/arm/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/dts/vf610-zii-dev.dtsi
@@ -42,360 +42,6 @@ n * copy, modify, merge, publish, distribute, sublicense, and/or
* OTHER DEALINGS IN THE SOFTWARE.
*/
-
-/*
- * =============================================================
- * The following code is shared with Linux kernel and should be
- * removed once it trickles down from there eventually
- * =============================================================
- */
-
-#include <arm/vf610.dtsi>
-
-/ {
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- reg = <0x80000000 0x20000000>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pinctrl_leds_debug>;
- pinctrl-names = "default";
-
- debug {
- label = "zii:green:debug1";
- gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_mcu";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- usb0_vbus: regulator-usb0-vbus {
- compatible = "regulator-fixed";
- pinctrl-0 = <&pinctrl_usb_vbus>;
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 6 0>;
- };
-};
-
-&adc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc0_ad5>;
- vref-supply = <®_vcc_3v3_mcu>;
- status = "okay";
-};
-
-&edma0 {
- status = "okay";
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
- bus-width = <4>;
- status = "okay";
-};
-
-&fec0 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec0>;
- status = "okay";
-};
-
-&fec1 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- status = "okay";
-
- fixed-link {
- speed = <100>;
- full-duplex;
- };
-
- mdio1: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- };
-};
-
-&i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c0>;
- pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- lm75@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- at24c04@50 {
- compatible = "atmel,24c04";
- reg = <0x50>;
- };
-
- at24c04@52 {
- compatible = "atmel,24c04";
- reg = <0x52>;
- };
-
- ds1682@6b {
- compatible = "dallas,ds1682";
- reg = <0x6b>;
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbdev0 {
- disable-over-current;
- vbus-supply = <&usb0_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usbh1 {
- disable-over-current;
- status = "okay";
-};
-
-&usbmisc0 {
- status = "okay";
-};
-
-&usbmisc1 {
- status = "okay";
-};
-
-&usbphy0 {
- status = "okay";
-};
-
-&usbphy1 {
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_adc0_ad5: adc0ad5grp {
- fsl,pins = <
- VF610_PAD_PTC30__ADC0_SE5 0x00a1
- >;
- };
-
- pinctrl_dspi0: dspi0grp {
- fsl,pins = <
- VF610_PAD_PTB18__DSPI0_CS1 0x1182
- VF610_PAD_PTB19__DSPI0_CS0 0x1182
- VF610_PAD_PTB20__DSPI0_SIN 0x1181
- VF610_PAD_PTB21__DSPI0_SOUT 0x1182
- VF610_PAD_PTB22__DSPI0_SCK 0x1182
- >;
- };
-
- pinctrl_dspi2: dspi2grp {
- fsl,pins = <
- VF610_PAD_PTD31__DSPI2_CS1 0x1182
- VF610_PAD_PTD30__DSPI2_CS0 0x1182
- VF610_PAD_PTD29__DSPI2_SIN 0x1181
- VF610_PAD_PTD28__DSPI2_SOUT 0x1182
- VF610_PAD_PTD27__DSPI2_SCK 0x1182
- >;
- };
-
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTA7__GPIO_134 0x219d
- >;
- };
-
- pinctrl_fec0: fec0grp {
- fsl,pins = <
- VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
- VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
- VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
- VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
- VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
- VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
- VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
- VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
- VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
- >;
- };
-
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- VF610_PAD_PTA6__RMII_CLKIN 0x30d1
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
-
- pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
- fsl,pins = <
- VF610_PAD_PTB22__GPIO_44 0x33e2
- VF610_PAD_PTB21__GPIO_43 0x33e2
- VF610_PAD_PTB20__GPIO_42 0x33e1
- VF610_PAD_PTB19__GPIO_41 0x33e2
- VF610_PAD_PTB18__GPIO_40 0x33e2
- >;
- };
-
- pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
- fsl,pins = <
- VF610_PAD_PTE14__GPIO_119 0x31c2
- >;
- };
-
- pinctrl_i2c0: i2c0grp {
- fsl,pins = <
- VF610_PAD_PTB14__I2C0_SCL 0x37ff
- VF610_PAD_PTB15__I2C0_SDA 0x37ff
- >;
- };
-
- pinctrl_i2c0_gpio: i2c0grp-gpio {
- fsl,pins = <
- VF610_PAD_PTB14__GPIO_36 0x31c2
- VF610_PAD_PTB15__GPIO_37 0x31c2
- >;
- };
-
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- VF610_PAD_PTB16__I2C1_SCL 0x37ff
- VF610_PAD_PTB17__I2C1_SDA 0x37ff
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- VF610_PAD_PTA22__I2C2_SCL 0x37ff
- VF610_PAD_PTA23__I2C2_SDA 0x37ff
- >;
- };
-
- pinctrl_leds_debug: pinctrl-leds-debug {
- fsl,pins = <
- VF610_PAD_PTD20__GPIO_74 0x31c2
- >;
- };
-
- pinctrl_qspi0: qspi0grp {
- fsl,pins = <
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
- VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
- >;
- };
-
- pinctrl_uart0: uart0grp {
- fsl,pins = <
- VF610_PAD_PTB10__UART0_TX 0x21a2
- VF610_PAD_PTB11__UART0_RX 0x21a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- VF610_PAD_PTB23__UART1_TX 0x21a2
- VF610_PAD_PTB24__UART1_RX 0x21a1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
- >;
- };
-
- pinctrl_usb_vbus: pinctrl-usb-vbus {
- fsl,pins = <
- VF610_PAD_PTA16__GPIO_6 0x31c2
- >;
- };
-
- pinctrl_usb0_host: usb0-host-grp {
- fsl,pins = <
- VF610_PAD_PTD6__GPIO_85 0x0062
- >;
- };
-};
-
-/*
- * =============================================================
- * End of shared part
- * =============================================================
- */
-
/ {
audio_ext: mclk_osc {
compatible = "fixed-clock";
diff --git a/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts b/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts
index d10f460e3..12c2568bc 100644
--- a/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts
+++ b/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts
@@ -44,6 +44,8 @@
/dts-v1/;
+#include <arm/vf610-zii-dev.dtsi>
+
#include "vf610-zii-dev.dtsi"
/ {
diff --git a/arch/arm/dts/vf610-zii-spu3-rev-a.dts b/arch/arm/dts/vf610-zii-spu3-rev-a.dts
index 25ab26ddf..f362e7f0b 100644
--- a/arch/arm/dts/vf610-zii-spu3-rev-a.dts
+++ b/arch/arm/dts/vf610-zii-spu3-rev-a.dts
@@ -43,8 +43,10 @@
*/
/dts-v1/;
-#include "vf610-zii-dev.dtsi"
+#include <arm/vf610-zii-dev.dtsi>
+
+#include "vf610-zii-dev.dtsi"
/ {
model = "ZII VF610 SPU3 Switch Management Board";
--
2.14.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 2/6] mdio_bus: Port of_mdio_find_bus() from Linux kernel
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 1/6] ARM: vybrid: zii: Make use of DT code from Linux kernel Andrey Smirnov
@ 2017-12-04 15:27 ` Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 3/6] net: phy: Port MDIO bus miltiplexer framework " Andrey Smirnov
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Andrey Smirnov @ 2017-12-04 15:27 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Port of_mdio_find_bus() from Linux kernel. This function is used in
MDIO multiplexor infrastructure added in following commit.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/net/phy/mdio_bus.c | 27 +++++++++++++++++++++++++++
include/linux/phy.h | 2 ++
2 files changed, 29 insertions(+)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 012b90e83..6ae85692d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -206,6 +206,33 @@ struct mii_bus *mdiobus_get_bus(int busnum)
return NULL;
}
+/**
+ * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
+ * @mdio_bus_np: Pointer to the mii_bus.
+ *
+ * Returns a reference to the mii_bus, or NULL if none found.
+ *
+ * Because the association of a device_node and mii_bus is made via
+ * mdiobus_register(), the mii_bus cannot be found before it is
+ * registered with mdiobus_register().
+ *
+ */
+struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
+{
+ struct mii_bus *mii;
+
+ if (!mdio_bus_np)
+ return NULL;
+
+ for_each_mii_bus(mii)
+ if (mii->dev.device_node == mdio_bus_np)
+ return mii;
+
+ return NULL;
+}
+EXPORT_SYMBOL(of_mdio_find_bus);
+
+
/**
* mdio_bus_match - determine if given PHY driver supports the given PHY device
* @dev: target PHY device
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d7b10afbc..809f06fb1 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -116,6 +116,8 @@ int mdiobus_detect(struct device_d *dev);
struct mii_bus *mdiobus_get_bus(int busnum);
+struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np);
+
/**
* mdiobus_read - Convenience function for reading a given MII mgmt register
* @bus: the mii_bus struct
--
2.14.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 3/6] net: phy: Port MDIO bus miltiplexer framework from Linux kernel
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 1/6] ARM: vybrid: zii: Make use of DT code from Linux kernel Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 2/6] mdio_bus: Port of_mdio_find_bus() " Andrey Smirnov
@ 2017-12-04 15:27 ` Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 4/6] net: phy: Port GPIO controlled MDIO multiplexer driver Andrey Smirnov
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Andrey Smirnov @ 2017-12-04 15:27 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Port mdio-mux.c from Linux kernel to Barebox, to support adding
dirvers that rely on that infrastructure/API.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/net/phy/Kconfig | 8 +++
drivers/net/phy/Makefile | 2 +
drivers/net/phy/mdio-mux.c | 142 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mdio-mux.h | 30 ++++++++++
4 files changed, 182 insertions(+)
create mode 100644 drivers/net/phy/mdio-mux.c
create mode 100644 include/linux/mdio-mux.h
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index ea2e06265..08ffd2d45 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -66,6 +66,14 @@ config MDIO_GPIO
---help---
Supports GPIO lib-based MDIO busses.
+config MDIO_BUS_MUX
+ bool
+ help
+ This module provides a driver framework for MDIO bus
+ multiplexers which connect one of several child MDIO busses
+ to a parent bus. Switching between child busses is done by
+ device specific drivers.
+
endif
endmenu
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 13b8f6545..89b4b80be 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_MDIO_MVEBU) += mdio-mvebu.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
+
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
new file mode 100644
index 000000000..4e924e586
--- /dev/null
+++ b/drivers/net/phy/mdio-mux.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2017 Zodiac Inflight Innovation
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * Based on analogous code from Linux kernel
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <linux/mdio-mux.h>
+#include <linux/phy.h>
+
+struct mdio_mux_parent_bus {
+ struct mii_bus *mii_bus;
+ int current_child;
+ int parent_id;
+ void *switch_data;
+ int (*switch_fn)(int current_child, int desired_child, void *data);
+};
+
+struct mdio_mux_child_bus {
+ struct mii_bus mii_bus;
+ struct mdio_mux_parent_bus *parent;
+ struct mdio_mux_child_bus *next;
+ int bus_number;
+};
+
+static int mdio_mux_read_or_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 *val)
+{
+ struct mdio_mux_child_bus *cb = bus->priv;
+ struct mdio_mux_parent_bus *pb = cb->parent;
+ int r;
+
+ r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
+ if (!r) {
+ pb->current_child = cb->bus_number;
+ if (val)
+ r = pb->mii_bus->write(pb->mii_bus, phy_id,
+ regnum, *val);
+ else
+ r = pb->mii_bus->read(pb->mii_bus, phy_id,
+ regnum);
+ }
+ return r;
+}
+
+static int mdio_mux_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ return mdio_mux_read_or_write(bus, phy_id, regnum, NULL);
+}
+
+static int mdio_mux_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 val)
+{
+ return mdio_mux_read_or_write(bus, phy_id, regnum, &val);
+}
+
+int mdio_mux_init(struct device_d *dev,
+ struct device_node *mux_node,
+ int (*switch_fn)(int cur, int desired, void *data),
+ void *data,
+ struct mii_bus *mux_bus)
+{
+ static int parent_count = 0;
+
+ struct device_node *parent_bus_node;
+ struct device_node *child_bus_node;
+ struct mdio_mux_parent_bus *pb;
+ struct mdio_mux_child_bus *cb;
+ struct mii_bus *parent_bus;
+ int r;
+
+ if (!mux_node)
+ return -ENODEV;
+
+ if (!mux_bus) {
+ parent_bus_node = of_parse_phandle(mux_node,
+ "mdio-parent-bus", 0);
+
+ if (!parent_bus_node)
+ return -ENODEV;
+
+ parent_bus = of_mdio_find_bus(parent_bus_node);
+
+ if (!parent_bus)
+ return -EPROBE_DEFER;
+ } else {
+ parent_bus_node = NULL;
+ parent_bus = mux_bus;
+ }
+
+ pb = xzalloc(sizeof(*pb));
+
+ pb->switch_data = data;
+ pb->switch_fn = switch_fn;
+ pb->current_child = -1;
+ pb->parent_id = parent_count++;
+ pb->mii_bus = parent_bus;
+
+ for_each_available_child_of_node(mux_node, child_bus_node) {
+ int v;
+
+ r = of_property_read_u32(child_bus_node, "reg", &v);
+ if (r) {
+ dev_err(dev,
+ "Error: Failed to find reg for child %pOF\n",
+ child_bus_node);
+ continue;
+ }
+
+ cb = xzalloc(sizeof(*cb));
+ cb->bus_number = v;
+ cb->parent = pb;
+
+ cb->mii_bus.priv = cb;
+ cb->mii_bus.parent = dev;
+ cb->mii_bus.read = mdio_mux_read;
+ cb->mii_bus.write = mdio_mux_write;
+ cb->mii_bus.dev.device_node = child_bus_node;
+
+ r = mdiobus_register(&cb->mii_bus);
+ if (r) {
+ dev_err(dev,
+ "Error: Failed to register MDIO bus for child %pOF\n",
+ child_bus_node);
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mdio_mux_init);
diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h
new file mode 100644
index 000000000..1730939bf
--- /dev/null
+++ b/include/linux/mdio-mux.h
@@ -0,0 +1,30 @@
+/*
+ * MDIO bus multiplexer framwork.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ */
+#ifndef __LINUX_MDIO_MUX_H
+#define __LINUX_MDIO_MUX_H
+#include <driver.h>
+#include <linux/phy.h>
+
+/* mdio_mux_init() - Initialize a MDIO mux
+ * @dev The device owning the MDIO mux
+ * @mux_node The device node of the MDIO mux
+ * @switch_fn The function called for switching target MDIO child
+ * @data Private data used by switch_fn()
+ * @mux_bus An optional parent bus (Other case are to use parent_bus property)
+ */
+int mdio_mux_init(struct device_d *dev,
+ struct device_node *mux_node,
+ int (*switch_fn) (int cur, int desired, void *data),
+ void *data,
+ struct mii_bus *mux_bus);
+
+void mdio_mux_uninit(void *mux_handle);
+
+#endif /* __LINUX_MDIO_MUX_H */
--
2.14.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 4/6] net: phy: Port GPIO controlled MDIO multiplexer driver
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
` (2 preceding siblings ...)
2017-12-04 15:27 ` [PATCH v2 3/6] net: phy: Port MDIO bus miltiplexer framework " Andrey Smirnov
@ 2017-12-04 15:27 ` Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 5/6] net: mdio-mux: Avoid probing multiplexed busses Andrey Smirnov
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Andrey Smirnov @ 2017-12-04 15:27 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Port Linux version driver to Barebox, to support such device found in
various revisions of ZII's VF610 development board.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/net/phy/Kconfig | 10 +++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-gpio.c | 147 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 158 insertions(+)
create mode 100644 drivers/net/phy/mdio-mux-gpio.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 08ffd2d45..cda752b65 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -74,6 +74,16 @@ config MDIO_BUS_MUX
to a parent bus. Switching between child busses is done by
device specific drivers.
+config MDIO_BUS_MUX_GPIO
+ bool "GPIO controlled MDIO bus multiplexers"
+ depends on OF_GPIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via GPIO lines. The multiplexer connects one of
+ several child MDIO busses to a parent bus. Child bus
+ selection is under the control of GPIO lines.
+
endif
endmenu
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 89b4b80be..30b20f8ee 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_MDIO_MVEBU) += mdio-mvebu.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
new file mode 100644
index 000000000..221353cbc
--- /dev/null
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2017 Zodiac Inflight Innovation
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * Based on analogous code from Linux kernel
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <linux/mdio-mux.h>
+#include <gpio.h>
+#include <of_gpio.h>
+
+
+struct mdio_mux_gpio_state {
+ struct gpio *gpios;
+ int gpios_num;
+};
+
+static void mdio_mux_gpio_set_active(struct mdio_mux_gpio_state *s,
+ unsigned int mask, int value)
+{
+ while (mask) {
+ const int n = __ffs(mask);
+ mask >>= n + 1;
+
+ if (WARN_ON(n >= s->gpios_num))
+ break;
+
+ gpio_set_active(s->gpios[n].gpio, value);
+ }
+}
+
+static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
+ void *data)
+{
+ if (current_child < 0)
+ current_child = 0;
+
+ if (current_child != desired_child) {
+ struct mdio_mux_gpio_state *s = data;
+ /*
+ * GPIOs that are set in both current and desired
+ * states can be left untouched. So we calculate them
+ * and clear corresponding bits in both states.
+ */
+ const int unchanged = current_child & desired_child;
+
+ current_child &= ~unchanged;
+ desired_child &= ~unchanged;
+
+ /*
+ * First step: disable all of the currently selected
+ * bits that are no loger needed
+ */
+ mdio_mux_gpio_set_active(s, current_child, 0);
+ /*
+ * Second step: enable all of the GPIOs that are
+ * desired to be selected
+ */
+ mdio_mux_gpio_set_active(s, desired_child, 1);
+ }
+
+ return 0;
+}
+
+static int mdio_mux_gpio_probe(struct device_d *dev)
+{
+ struct mdio_mux_gpio_state *s;
+ int i, r;
+
+ s = xzalloc(sizeof(*s));
+
+ s->gpios_num = of_gpio_count(dev->device_node);
+ if (s->gpios_num <= 0) {
+ dev_err(dev, "No GPIOs specified\n");
+ r = -EINVAL;
+ goto free_mem;
+ }
+
+ s->gpios = xzalloc(s->gpios_num * sizeof(s->gpios[0]));
+
+ for (i = 0; i < s->gpios_num; i++) {
+ enum of_gpio_flags flags;
+
+ r = of_get_gpio_flags(dev->device_node, i, &flags);
+ if (!gpio_is_valid(r)) {
+ r = (r < 0) ? r : -EINVAL;
+ goto free_mem;
+ }
+
+ s->gpios[i].gpio = r;
+ s->gpios[i].label = dev_name(dev);
+ s->gpios[i].flags = GPIOF_OUT_INIT_INACTIVE;
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ s->gpios[i].flags |= GPIOF_ACTIVE_LOW;
+ }
+
+ r = gpio_request_array(s->gpios, s->gpios_num);
+ if (r < 0)
+ goto free_gpios;
+
+
+ r = mdio_mux_init(dev, dev->device_node,
+ mdio_mux_gpio_switch_fn, s, NULL);
+ if (r < 0)
+ goto free_gpios;
+
+ return 0;
+
+free_gpios:
+ gpio_free_array(s->gpios, s->gpios_num);
+free_mem:
+ free(s->gpios);
+ free(s);
+ return r;
+}
+
+static const struct of_device_id mdio_mux_gpio_match[] = {
+ {
+ .compatible = "mdio-mux-gpio",
+ },
+ {},
+};
+
+static struct driver_d mdio_mux_gpio_driver = {
+ .name = "mdio-mux-gpio",
+ .probe = mdio_mux_gpio_probe,
+ .of_compatible = mdio_mux_gpio_match,
+};
+device_platform_driver(mdio_mux_gpio_driver);
--
2.14.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 5/6] net: mdio-mux: Avoid probing multiplexed busses
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
` (3 preceding siblings ...)
2017-12-04 15:27 ` [PATCH v2 4/6] net: phy: Port GPIO controlled MDIO multiplexer driver Andrey Smirnov
@ 2017-12-04 15:27 ` Andrey Smirnov
2017-12-04 15:27 ` [PATCH v2 6/6] zii_vf610_dev_defconfig: Select MDIO bus GPIO multiplexer Andrey Smirnov
2017-12-06 14:49 ` [PATCH v2 0/6] MDIO bus multiplexer support Sascha Hauer
6 siblings, 0 replies; 8+ messages in thread
From: Andrey Smirnov @ 2017-12-04 15:27 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Calling mdiobus_detect() for a bus that serves as a parent for a MDIO
bus multiplexer would result in parent bus being populated with
devices that are present on downstream bus that multiplexer happens to
be "pointing" at that moment. To avoid that introduce 'is_multiplexed'
flag to struct mii_bus and change mdiobus_detect to ignore busses for
which that flag is set.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/net/phy/mdio-mux.c | 1 +
drivers/net/phy/mdio_bus.c | 3 +++
include/linux/phy.h | 2 ++
3 files changed, 6 insertions(+)
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 4e924e586..1f57d86c6 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -137,6 +137,7 @@ int mdio_mux_init(struct device_d *dev,
}
}
+ parent_bus->is_multiplexed = true;
return 0;
}
EXPORT_SYMBOL_GPL(mdio_mux_init);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6ae85692d..d209716a1 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -32,6 +32,9 @@ int mdiobus_detect(struct device_d *dev)
struct mii_bus *mii = to_mii_bus(dev);
int i, ret;
+ if (mii->is_multiplexed)
+ return 0;
+
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 809f06fb1..ac750f5c3 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -100,6 +100,8 @@ struct mii_bus {
u32 phy_mask;
struct list_head list;
+
+ bool is_multiplexed;
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
--
2.14.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 6/6] zii_vf610_dev_defconfig: Select MDIO bus GPIO multiplexer
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
` (4 preceding siblings ...)
2017-12-04 15:27 ` [PATCH v2 5/6] net: mdio-mux: Avoid probing multiplexed busses Andrey Smirnov
@ 2017-12-04 15:27 ` Andrey Smirnov
2017-12-06 14:49 ` [PATCH v2 0/6] MDIO bus multiplexer support Sascha Hauer
6 siblings, 0 replies; 8+ messages in thread
From: Andrey Smirnov @ 2017-12-04 15:27 UTC (permalink / raw)
To: barebox; +Cc: Andrey Smirnov
Select MDIO bus GPIO multiplexer to support hardware present on the
board.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
arch/arm/configs/zii_vf610_dev_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/zii_vf610_dev_defconfig b/arch/arm/configs/zii_vf610_dev_defconfig
index e2cb658d9..ee77f4000 100644
--- a/arch/arm/configs/zii_vf610_dev_defconfig
+++ b/arch/arm/configs/zii_vf610_dev_defconfig
@@ -92,6 +92,7 @@ CONFIG_LM75=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_MARVELL_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_NET_USB=y
CONFIG_NET_USB_ASIX=y
CONFIG_NET_USB_SMSC95XX=y
--
2.14.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2 0/6] MDIO bus multiplexer support
2017-12-04 15:27 [PATCH v2 0/6] MDIO bus multiplexer support Andrey Smirnov
` (5 preceding siblings ...)
2017-12-04 15:27 ` [PATCH v2 6/6] zii_vf610_dev_defconfig: Select MDIO bus GPIO multiplexer Andrey Smirnov
@ 2017-12-06 14:49 ` Sascha Hauer
6 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2017-12-06 14:49 UTC (permalink / raw)
To: Andrey Smirnov; +Cc: barebox
On Mon, Dec 04, 2017 at 07:27:12AM -0800, Andrey Smirnov wrote:
> Hi everyone,
>
> This is the second version of my original, with few modifications and
> fixes.
>
> Changes since [v1]:
>
> - Addressed smalle issues pointed out by Sascha (leftover comment,
> bad identation)
>
> - Added patch enabling MDIO GPIO mux driver for ZII VF610 boards
> since the are the HW this patchset targets.
>
> [v1] http://lists.infradead.org/pipermail/barebox/2017-November/031589.html
>
> Andrey Smirnov (6):
> ARM: vybrid: zii: Make use of DT code from Linux kernel
> mdio_bus: Port of_mdio_find_bus() from Linux kernel
> net: phy: Port MDIO bus miltiplexer framework from Linux kernel
> net: phy: Port GPIO controlled MDIO multiplexer driver
> net: mdio-mux: Avoid probing multiplexed busses
> zii_vf610_dev_defconfig: Select MDIO bus GPIO multiplexer
Applied, thanks
Sascha
>
> arch/arm/configs/zii_vf610_dev_defconfig | 1 +
> arch/arm/dts/vf610-zii-cfu1-rev-a.dts | 3 +-
> arch/arm/dts/vf610-zii-dev-rev-b.dts | 386 +----------------------------
> arch/arm/dts/vf610-zii-dev-rev-c.dts | 391 +-----------------------------
> arch/arm/dts/vf610-zii-dev.dtsi | 354 ---------------------------
> arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts | 2 +
> arch/arm/dts/vf610-zii-spu3-rev-a.dts | 4 +-
> drivers/net/phy/Kconfig | 18 ++
> drivers/net/phy/Makefile | 3 +
> drivers/net/phy/mdio-mux-gpio.c | 147 +++++++++++
> drivers/net/phy/mdio-mux.c | 143 +++++++++++
> drivers/net/phy/mdio_bus.c | 30 +++
> include/linux/mdio-mux.h | 30 +++
> include/linux/phy.h | 4 +
> 14 files changed, 385 insertions(+), 1131 deletions(-)
> create mode 100644 drivers/net/phy/mdio-mux-gpio.c
> create mode 100644 drivers/net/phy/mdio-mux.c
> create mode 100644 include/linux/mdio-mux.h
>
> --
> 2.14.3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 8+ messages in thread