Hei hei, as already stated on the DistroKit list: I'm not sure if this is the right approach for barebox, however I successfully tested it on top of master. Greets Alex Tested-by: Alexander Dahl On Wed, Dec 06, 2017 at 04:12:33PM +0100, Roland Hieber wrote: > From: Roland Hieber > > Kernel commit a19adf8d86e822eba502486524127595372c85f6 [0] changed the > RPi1 device tree from &sdhci to &sdhost, which was imported in barebox > commit d14b844b08635c717fb52a294ed8d6872e260315. It seems that barebox > does not have a driver for brcm,bcm2835-sdhost (yet), which resulted in > barebox unable to boot from SD card. However, the driver for > brcm,bcm2835-sdhci worked fine in the past. > > Although the upstream change was made for good reasons, the simplest > change for barebox for now is to revert to using &sdhci and disable > &sdhost. > > Thanks to Alexander Dahl for raising this issue on the DistroKit > mailing list! > > [0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a19adf8d86e822eba502486524127595372c85f6 > > Cc: Alexander Dahl > Signed-off-by: Roland Hieber > --- > arch/arm/dts/bcm2835-rpi.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/dts/bcm2835-rpi.dts b/arch/arm/dts/bcm2835-rpi.dts > index 0095f58a3c..ab2d6dff64 100644 > --- a/arch/arm/dts/bcm2835-rpi.dts > +++ b/arch/arm/dts/bcm2835-rpi.dts > @@ -9,3 +9,10 @@ > reg = <0x0 0x0>; > }; > }; > +&sdhci { > + status = "okay"; > +}; > + > +&sdhost { > + status = "disabled"; > +}; > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox -- »With the first link, the chain is forged. The first speech censured, the first thought forbidden, the first freedom denied, chains us all irrevocably.« (Jean-Luc Picard, quoting Judge Aaron Satie) *** GnuPG-FP: C28E E6B9 0263 95CF 8FAF 08FA 34AD CD00 7221 5CC6 ***