mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <linux@rempel-privat.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <linux@rempel-privat.de>
Subject: [PATCH v2 3/5] MIPS: ath79: ar9331: add generic RAM macro
Date: Tue, 12 Dec 2017 18:55:55 +0100	[thread overview]
Message-ID: <20171212175557.20067-4-linux@rempel-privat.de> (raw)
In-Reply-To: <20171212175557.20067-1-linux@rempel-privat.de>

with this macro, we should be able to cover most of existing
ar9331 based boards.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 arch/mips/mach-ath79/include/mach/ar71xx_regs.h |  1 +
 arch/mips/mach-ath79/include/mach/pbl_macros.h  | 37 +++++++++++++++++++++++--
 2 files changed, 35 insertions(+), 3 deletions(-)

diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
index 31d33b3c4..f73700b5b 100644
--- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
+++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
@@ -139,6 +139,7 @@
 
 #define AR71XX_RESET_FULL_CHIP		BIT(24)
 
+#define AR933X_BOOTSTRAP_MEM_TYPE	BIT(13)
 #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
 
 #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/arch/mips/mach-ath79/include/mach/pbl_macros.h b/arch/mips/mach-ath79/include/mach/pbl_macros.h
index 680fcbb86..9e4859b19 100644
--- a/arch/mips/mach-ath79/include/mach/pbl_macros.h
+++ b/arch/mips/mach-ath79/include/mach/pbl_macros.h
@@ -172,6 +172,40 @@
 	.set	pop
 .endm
 
+#define RESET_REG_BOOTSTRAP	((KSEG1 | AR71XX_RESET_BASE) \
+					| AR933X_RESET_REG_BOOTSTRAP)
+
+.macro	pbl_ar9331_ram_generic_config
+	.set	push
+	.set	noreorder
+
+	li	t5,	RESET_REG_BOOTSTRAP
+	/* Documentation and source code of existing boot loaders disagree at
+	 * this place. Doc says: MEM_TYPE[13:12]:
+	 * - 00 = SDRAM
+	 * - 01 = DDR1
+	 * - 10 = DDR2
+	 * The source code of most loaders do not care about BIT(12). So we do
+	 * the same.
+	 */
+	li	t6,	AR933X_BOOTSTRAP_MEM_TYPE
+	lw	t7,	0(t5);
+	and	t6,	t7,	t6
+	beq	zero,	t6,	pbl_ar9331_ram_generic_ddr1
+	nop
+
+pbl_ar9331_ram_generic_ddr2:
+	pbl_ar9331_ddr2_config
+	b	pbl_ar9331_ram_generic_config
+	nop
+
+pbl_ar9331_ram_generic_ddr1:
+	pbl_ar9331_ddr1_config
+
+pbl_ar9331_ram_generic_config:
+	.set	pop
+.endm
+
 #define GPIO_FUNC	((KSEG1 | AR71XX_GPIO_BASE) | AR71XX_GPIO_REG_FUNC)
 
 .macro	pbl_ar9331_uart_enable
@@ -179,9 +213,6 @@
 			| AR933X_GPIO_FUNC_RSRV15, GPIO_FUNC
 .endm
 
-#define RESET_REG_BOOTSTRAP	((KSEG1 | AR71XX_RESET_BASE) \
-					| AR933X_RESET_REG_BOOTSTRAP)
-
 .macro	pbl_ar9331_mdio_gpio_enable
 	/* Bit 18 enables MDC and MDIO function on GPIO26 and GPIO28 */
 	pbl_reg_set (1 << 18), RESET_REG_BOOTSTRAP
-- 
2.14.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2017-12-12 17:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-12 17:55 [PATCH v2 0/5] add support for DPTechnics DPT-Module v1 Oleksij Rempel
2017-12-12 17:55 ` [PATCH v2 1/5] MIPS: provide HAS_NO_BOARD_HL_CODE Oleksij Rempel
2017-12-12 17:55 ` [PATCH v2 2/5] MIPS: ar9331: add watchdog support Oleksij Rempel
2017-12-12 17:55 ` Oleksij Rempel [this message]
2017-12-12 17:55 ` [PATCH v2 4/5] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro Oleksij Rempel
2017-12-12 17:55 ` [PATCH v2 5/5] MIPS: add support for DPTechnics DPT-Module v1 Oleksij Rempel
2017-12-15  7:22 ` [PATCH v2 0/5] " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171212175557.20067-4-linux@rempel-privat.de \
    --to=linux@rempel-privat.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox